May 2015 - Users - lists.chirpmyradio.com

[chirp_users] ICOM IC-2300H
by John Wuest 22 May '15

22 May '15

Does anyone know if CHIRP will work with the ICOM IC-2300H transceiver? I see the 2200H listed, but not the 2300H. Your input will be appreciated. John, KZ4KY

2 1

[chirp_users] IC-T70A: has anyone programmed it successfully?
by Nicholas Papadonis 21 May '15

21 May '15

Hi Folks, Has anyone heard reports of an Icom IC-T70A or IC-T70E working with Chirp? I'm having difficulty programming this radio, however can program my Baofeng. I have a Genuine FTDI USB cable. Unfortunately, I keep getting an error downloading from the radio. "Failed to communicate with the radio: Unexpected response from radio". As device manager says the COM port is ok, I'm suspecting something else is going on. The USB serial cable is properly detected by my Mac OSX v10.10.3 as a USB serial device. The device properly appears in the OS as /dev/cu.usbserial-A9030T4G. I tried a couple versions of Chirp and used this device path. In my tests I tried downloading from the radio both by specifying Icom / IC-T70 and then Icom / Autodetect. Both setting resulted in failure to communicate with the radio. The radio then begins to cycle memory channels after the download fails. I have attached the Chirp debug log from a recent daily build 2015-05-02. I tried an older build from a year ago from 2014-12-15 with the same results. I have also noticed a few bugs around this radio and wondering if perhaps an older Chirp build works correctly. Any insight is appreciated. Thanks, Nick KB1GZN New York, NY USA

1 0

[chirp_users] From K3WS New Yaesu FTM-400DR
by tom＠k3ws.com 21 May '15

21 May '15

3 2

[chirp_users] UV5R7W
by David Pruitt 20 May '15

20 May '15

This HT was sold at the Dayton Hamvention as a 7 watt HT with a 3800MAH battery, In trying to program it as a UV5R I could read from the radio but could not install a new image on the radio as I was getting a Unsupported Firmware Version N5R3407BFP3-23XX error. This radio's drivers are experamental. I had found out the chip version of the Baofeng programming cable was needing the Prolific 2303 TA drivers which I got from the Prolific web page and these worked ok. I then discovered you must download the radio as a Baofeng BF-F8HP image and this solved all the problems. Dave+++++++++++++++++++++++++++++++++++++++++++++ W9DP DAVID PRUITT . - - - - - - . - . . . - - . - . . . - . . . - . . - . . . - - . . - . . . - . . - - David R Pruitt W9DP ( Amateur Radio ) 20 WPM EXTRA Media Services Technician/Computer Network Specialist Vincennes University (Retired) 1506 Franklin Dr Vincennes, In 47591-6403 812-316-0333 Email: dpruitt(a)ymail.com

2 1

[chirp_users] Hidden memory columns
by n7uzl 19 May '15

19 May '15

Hello For whatever reason, sometimes when building a memory list to upload to my UV-82c, items such as TSQL and others will change on their own. There are several columns that do not pertain to values I want to add to my radio. MY question is: If I hide a column, can values be changed without my knowledge in a hidden column? Regards, Don

2 1

Re: [chirp_users] Import from stock config - option not available
by Rich Carlson 16 May '15

16 May '15

Morning All, I downloaded the daily build that was made available this morning. No luck - the Import from stock config option is still nowhere to be found. Here are all of the choices under the Menu options: CHIRP: Get Help Online / About / Services / Hide / Hide others / Show All / Quit File: New / Open / Recent / Save / Save As / Import / Export / Close Edit: Cut / Copy /Paste / Delete / Select All / Move Up /Move Down / Exchange / Properties / Start dictation / Emoji & Symbols View: Columns / Hide Unused Fields / Smart tone modes / Change language Radio: Download from Radio / Upload to Radio / Import from Data Source / Query from Data Source / Channel defaults / Stop Help: Report Statistics / Enable developer functions The only greyed out choice is Stop (under Radio). KK7DS Python Runtime R10 is installed. I was able to successfully download info from RepeaterBook, so Chirp is partially working. Just no sign of stock config anywhere. From: Jim Unroe <rock.unroe(a)gmail.com> To: Rich Carlson <astrofan15(a)yahoo.com> Sent: Tuesday, May 12, 2015 5:59 PM Subject: Re: [chirp_users] Import from stock config - option not available So if you click "File", is there an "Open stock config" option? This would be the same files. They just open in a separate tab. You would just cut-and-paste them to where you want them instead of import them directly. Jim KC9HI On Tue, May 12, 2015 at 6:41 PM, Rich Carlson <astrofan15(a)yahoo.com> wrote: | Yes sir KK7DS Python Runtime R10 is installed. I was able to successfully download info from RepeaterBook, so Chirp is partially working. Just no sign of stock config anywhere. Rich Sent from Yahoo Mail on Android | From:"Jim Unroe" <rock.unroe(a)gmail.com> Date:Tue, May 12, 2015 at 4:29 PM Subject:Re: [chirp_users] Import from stock config - option not available On Tue, May 12, 2015 at 6:12 PM, Rich Carlson <astrofan15(a)yahoo.com> wrote: > The 4 options I listed below are the only options available under "Radio / > Import from Data Source" and "Radio / Query Data Source". There is no 5th > option for "Import from stock config" (greyed out or otherwise). > > And I have two tabs open at this time: My download from radio tab, and a new > empty tab that I just created to see if that would help. The 4 selections > are the same on both tabs. > > And I'm running on a Mac (Yosemite 10.10.3) if that makes any difference. You'll have to bear with me, I'm not a Mac person. You do have the "KK7DS Python runtime" installed, right? Jim KC9HI | |

4 8

[chirp_users] Yosemite - SiLABS UART
by Dennis Feely 15 May '15

15 May '15

Using Yosemite on iMac. Had the SiLabs and Yaesu FT-1D with SCU-19 cable working ok. Took a long time and should have written the procedure. I installed the Prolific drive for Baofeng radio. I got that working OK. Then the SiLABS UART stopped ’talking’ to Yaesu. Using latest daily build of Chirp. Looking at info on mac, I see the drivers for both Prolific and UART under USB selection Anyone have any ideas - I have re-installed the UART driver. I can see various selection when I connect CHIRP under Ports. Both the SLAB_USB-UART and USB-Prolific show up. I have also used the command under terminal: sudo nvram boot-args="kext-dev-mode=1” I am not very savvy on Mac but need help suggestions??? 73, Dennis

1 0

[chirp_users] How to use the software
by David 14 May '15

14 May '15

Hello, I downloaded and installed the software. I am able to access the radio but I need help with all the column headings. What is Tone mode, TSQL, DTCS, none and cross? Tone ToneSqu DTCS Code DTCS RX Code DTCS Pol MN, RR, RN, NR Cross Mode, tone->Tone, Tone->DTCS, DTCS->Tone, ->Tone, DTCS->, DTCS->DTCS Duplex none, -, +, split, off Offset Mode FM, NFM Skip If I just want to listen to a channel and not talk on it want should the above setting be set to? If I want to use it for my RR job what do I set the above too? I know the frequencys. What is type "BM" and mode "FMN" on radio reference mean? Thanks for your help. David

4 6

[chirp_users] New Daily Build
by Build System 13 May '15

13 May '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20150513 A list of the changes included in this build (since the last daily) follows: Changes for Build #349 [Dan Smith <dsmith(a)danplanet.com>] Add test image for TYT TH9000 from David Dannin Related to #1035 [David Fannin <dfannin(a)sushisoft.com>] [Th9000] New model driver for TYT TH9000D radios - fixed base class #1035 [Marco Filippi <iz3gme.marco(a)gmail.com>] Add missing countries to przemienniki.net query form Implement #2569

1 0

[chirp_users] Import from stock config - option not available
by Rich Carlson 12 May '15

12 May '15

Evening, I'm trying to find the "Import from stock config" functionality in CHIRP and I don't see it anywhere. The only 4 choices I have are: Radioreference.comRepeaterBookprzemienniki.netRFinder The CHIRP FAQ page indicates "These are canned frequency plans, some of which are built into chirp." Where do I find this "Import from stock config" functionality? Please advise.

5 8