April 2014 - Users - lists.chirpmyradio.com

[chirp_users] Straightening out mixed terminology
by Pete Miller 08 Apr '14

08 Apr '14

Hi, Acknowledging up front that I'm a rookie, so give me all the guidance you think I need. Although I'm sorely tempted to curse the darkness, the reason for this mail is to try to light a candle, in case anyone else has some of the same questions. The challenge is differences in the terminology of repeater directories, CHIRP, and my new, first radio, a BaoFeng UV-5RE Plus. I've looked for answers in the CHIRP FAQ as well as some web searching. If you're not the right ones to deal with some or all of these questions, please share your suggestions about other sources. In advance, thanks. /kc1bkh -- Pete =-=-= Below are examples of a repeater directory table, a csv-formatted table for BaoFeng UV-5RE Plus, and the cloned CHIRP report for the UV-5RE Plus *The overall question:* How does the repeater directory terminology fit CHIRP's and the BaoFeng columns? ( This link was somewhat helpful, btw > http://kc5olo.org/downloads/repeater1.pdf . ) Repeater directory columns FREQOFSSTCITYCALLMODECODE IN OUTSTATUSCOUNTYIRLPECHOLINKS/COMMENTSLas =-= - Freq -- transmit frequency of repeater? yes, according to KC5OLO - OFS -- For example, standard offset for 2m is -600 kHz *What* gets entered *where* in the BaoFeng CSV and cloned columns? Maybe only the "-" or "+" or "split" gets entered? Then the offset is just calculated for each band? - Mode Same as BF-UV5 "Tone Mode", or maybe BF's "Mode" (which is usually FM for 2m band, right?) ? What is "Tone Mode"? - Code In and Code Out-- Here are four examples from the repeater directory 146.445+1MCTBridgeportWA1RJI77.0/ 156.777.0*Fairfield 224.680 (Rocky Hill, CT)2012/09/09146.475+1MCTNorwalk W1NLK100.0100.0Fairfield 2012/09/12146.625- CTFairfieldWB1CQO100.0Fairfield 146.655- CTStamfordW1EE100.0Fairfield 158564 WB1GRB-R2013/01/28 +1M is special offset? 146.445 : What does 77.0 / 156.7 for Code In mean? 146.445 : What does the red typestyle for Code Out mean? * means 'Gated PL' but I don't know what that means, yet. What are the units of the 77.0, 100.0, and 156.7 numbers? mHz? - IRLP - The Internet Radio Linking Project I'm not there yet - Echo - Refers to EchoLink® ? I'm not there yet =-= BaoFeng UV-5RE-Plus memory columns - cloned report downloaded from radio [image: Inline image 1] How do these terms map to the ones in the csv-format below? csv cloned Frequency.......Frequency Name...............Name Tone Mode.......? Tone................?Tone ToneSql...........? DTCS Code......Dtcs Code DTCS Rx Code ? DTCS Pol.........Dtcs Polarity CrossMode.......? Duplex..............Duplex Offset...............Offset Mode................?Mode Power...............? hi or lo, but I haven't found that detail, so far Skip.................Skip =-= BaoFeng UV-5RE-Plus memory columns - csv format Location |Name|Frequency|Duplex|Offset|Tone|rToneFreq|cToneFreq|DtcsCode| DtcsPolarity|Mode|TStep|Skip|CommentURCALLRPT1CALLRPT2CALL What are rToneFreq cToneFreq TStep Skip Why aren't the csv and cloned column headers and content the same? I do get that the column headers are supposed to guide the process of uploading to the radio, so the *order* of columns can be different. But why not make them the same, anyhow? May be a BaoFeng problem: When I try to manually enter info directly into the clone report, I can enter Name and Frequency, but clicking on other columns just makes the entire row (such as, the row for memory location 22) go away; seems to erase the row. I haven't figured out how to recover it, but since I haven't uploaded anything, I can of course download a new image. Suggestions about how to make direct entry into the downloaded, "cloned" report? =-= Thanks. I've done my best to provide enough context, but if you want any more info, just ask.

5 6

Re: [chirp_users] Cannot Upload to Yausu VX-6
by Richard Martinelli 08 Apr '14

08 Apr '14

I'm having the same problem trying to upload to my Yaesu VX-7R as that which is described in Issue 1433. I was able to download the image, made some changes and now cannot upload it back. The only thing different from what was identified in Issue 1433 is I'm running Mountain Lion 10.8.5 and the new Apple FTDI drive is not utilized. I'm running the FTDI 2.2.18 driver downloaded from their site. Is there any update regarding 10.8.5 and the FTDI driver? I have not been able to locate any issues regarding FTDI and 10.8.5. Any suggestions would be greatly appreciated. I have tried various changes to the Info.plist file, as suggested by FTDI site documents, but nothing seems to make any deference. So, after several weeks of frustration, I'm looking for any suggestions/help. The cable I'm using was purchased from Valley Enterprises and my system does "see" it and so does CHIRP. It sure does sound like it's a driver issue, but I just don't know were to go from here. I've include the System Panic Report and the CHIRP debug.log, which I ran just before I Forced Quit the program, which causes the system panic. That is the only way I can get CHIRP to stop trying to upload. I would send the after reboot debug.log, but CHIRP automatically restarts and clears the log. Sorry for the long email, I guess it's a "newbee" thing, Rich PANIC REPORT: Interval Since Last Panic Report: 586137 sec Panics Since Last Report: 29 Anonymous UUID: 299230DF-0877-496F-0E01-31DC8FF59673 Fri Apr 4 21:24:58 2014 panic(cpu 2 caller 0xffffff80280b8945): Kernel trap at 0xffffff7fa9d1ef59, type 13=general protection, registers: CR0: 0x000000008001003b, CR2: 0x0000000104479830, CR3: 0x000000002a425000, CR4: 0x00000000001606e0 RAX: 0xffffff80344a6300, RBX: 0xffffff8041cd9000, RCX: 0xffffff80286f4820, RDX: 0x0000000000000007 RSP: 0xffffff802f61bc80, RBP: 0xffffff802f61bca0, RSI: 0xffffff803332fc00, RDI: 0xffffff803dd50900 R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff803367b9c0, R11: 0xffffff802f61bda4 R12: 0x0000000000000007, R13: 0xffffff803332fc00, R14: 0xffffff8041cd9000, R15: 0xffffff803332fc00 RFL: 0x0000000000010286, RIP: 0xffffff7fa9d1ef59, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0x0000000104479830, Error code: 0x0000000000000000, Fault CPU: 0x2 Backtrace (CPU 2), Frame : Return Address 0xffffff802f61b920 : 0xffffff802801d636 0xffffff802f61b990 : 0xffffff80280b8945 0xffffff802f61bb60 : 0xffffff80280cebfd 0xffffff802f61bb80 : 0xffffff7fa9d1ef59 0xffffff802f61bca0 : 0xffffff8028438889 0xffffff802f61bcf0 : 0xffffff802844fdd1 0xffffff802f61bd30 : 0xffffff8028438d4b 0xffffff802f61bd70 : 0xffffff80284380ca 0xffffff802f61bdd0 : 0xffffff8028437d77 0xffffff802f61be10 : 0xffffff8028437b27 0xffffff802f61be80 : 0xffffff8028438edc 0xffffff802f61be90 : 0xffffff7fa8825703 0xffffff802f61bec0 : 0xffffff7fa8998a0a 0xffffff802f61bf00 : 0xffffff7fa8998fb4 0xffffff802f61bf40 : 0xffffff7fa8997bac 0xffffff802f61bf60 : 0xffffff802803e26e 0xffffff802f61bfb0 : 0xffffff80280b3257 Kernel Extensions in backtrace: com.apple.iokit.IOUSBFamily(635.4)[E67F44F7-A4BD-3CD1-A01B-B37D783CE613]@0xffffff7fa8811000->0xffffff7fa886efff dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff7fa8675000 com.apple.driver.AppleUSBHub(635.4)[52517FC7-F1EF-3E05-99DC-7553722B8EFF]@0xffffff7fa898e000->0xffffff7fa89a2fff dependency: com.apple.iokit.IOUSBFamily(635.4.0)[E67F44F7-A4BD-3CD1-A01B-B37D783CE613]@0xffffff7fa8811000 com.FTDI.driver.FTDIUSBSerialDriver(2.2.18)[638ECCC3-375D-CD1A-C2EC-0DC14740FC9C]@0xffffff7fa9d1d000->0xffffff7fa9d24fff dependency: com.apple.iokit.IOUSBFamily(635.4.0)[E67F44F7-A4BD-3CD1-A01B-B37D783CE613]@0xffffff7fa8811000 dependency: com.apple.iokit.IOSerialFamily(10.0.6)[7191512A-FD43-339A-BE50-857BFD87B27C]@0xffffff7fa8ad1000 BSD process name corresponding to current thread: kernel_task Mac OS version: 12F45 Kernel version: Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64 Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8 Kernel slide: 0x0000000027e00000 Kernel text base: 0xffffff8028000000 System model name: MacBookPro9,2 (Mac-6F01561E16C75D06) System uptime in nanoseconds: 5381982690136 last loaded kext at 527967674926: com.FTDI.driver.FTDIUSBSerialDriver 2.2.18 (addr 0xffffff7fa9d1d000, size 57344) last unloaded kext at 589027282033: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7fa9d1a000, size 12288) loaded kexts: com.FTDI.driver.FTDIUSBSerialDriver 2.2.18 com.squirrels.airparrot.framebuffer 3 com.apple.iokit.IOBluetoothSerialManager 4.1.7f2 com.apple.driver.AudioAUUC 1.60 com.apple.driver.AGPM 100.13.12 com.apple.driver.X86PlatformShim 1.0.0 com.apple.driver.AppleMikeyHIDDriver 124 com.apple.filesystems.autofs 3.0 com.apple.driver.AppleSMCPDRC 1.0.0 com.apple.driver.AppleHDA 2.4.7fc4 com.apple.driver.AppleIntelHD4000Graphics 8.1.6 com.apple.driver.AppleMikeyDriver 2.4.7fc4 com.apple.driver.AppleSMBusPCI 1.0.11d1 com.apple.driver.AppleLPC 1.6.3 com.apple.driver.AppleUpstreamUserClient 3.5.12 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.ApplePolicyControl 3.4.5 com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.1.7f4 com.apple.driver.AppleSMCLMU 2.0.3d0 com.apple.driver.AppleIntelFramebufferCapri 8.1.6 com.apple.driver.AppleBacklight 170.3.5 com.apple.driver.AppleMCCSControl 1.1.11 com.apple.driver.SMCMotionSensor 3.0.3d1 com.apple.driver.AppleUSBTCButtons 237.1 com.apple.driver.AppleUSBTCKeyboard 237.1 com.apple.driver.AppleIRController 320.15 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 34 com.apple.iokit.SCSITaskUserClient 3.5.6 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCIBlockStorage 2.3.5 com.apple.driver.AppleFWOHCI 4.9.9 com.apple.driver.AirPort.Brcm4331 615.20.17 com.apple.driver.AppleSDXC 1.4.3 com.apple.iokit.AppleBCM5701Ethernet 3.6.2b4 com.apple.driver.AppleUSBHub 635.4.0 com.apple.driver.AppleAHCIPort 2.6.6 com.apple.driver.AppleUSBEHCI 621.4.6 com.apple.driver.AppleUSBXHCI 635.4.0 com.apple.driver.AppleSmartBatteryManager 161.0.0 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleRTC 1.5 com.apple.driver.AppleACPIButtons 1.8 com.apple.driver.AppleSMBIOS 1.9 com.apple.driver.AppleACPIEC 1.8 com.apple.driver.AppleAPIC 1.7 com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0 com.apple.nke.applicationfirewall 4.0.39 com.apple.security.quarantine 2.1 com.apple.driver.AppleIntelCPUPowerManagement 214.0.0 com.apple.iokit.IOSerialFamily 10.0.6 com.apple.kext.triggers 1.0 com.apple.driver.DspFuncLib 2.4.7fc4 com.apple.iokit.IOAudioFamily 1.9.2fc7 com.apple.kext.OSvKernDSPLib 1.12 com.apple.iokit.IOAcceleratorFamily 74.15 com.apple.driver.X86PlatformPlugin 1.0.0 com.apple.driver.IOPlatformPluginFamily 5.4.1d13 com.apple.iokit.IOSurface 86.0.4 com.apple.iokit.IOBluetoothFamily 4.1.7f2 com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f2 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.driver.AppleHDAController 2.4.7fc4 com.apple.iokit.IOHDAFamily 2.4.7fc4 com.apple.driver.AppleSMBusController 1.0.11d1 com.apple.driver.AppleGraphicsControl 3.4.5 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.iokit.IONDRVSupport 2.3.7 com.apple.iokit.IOGraphicsFamily 2.3.7 com.apple.driver.AppleSMC 3.1.5d4 com.apple.driver.AppleUSBMultitouch 237.3 com.apple.driver.AppleThunderboltDPInAdapter 2.5.0 com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0 com.apple.driver.AppleThunderboltPCIDownAdapter 1.3.2 com.apple.iokit.IOUSBHIDDriver 623.4.0 com.apple.driver.AppleUSBMergeNub 621.4.6 com.apple.driver.AppleUSBComposite 621.4.0 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOAHCISerialATAPI 2.5.5 com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6 com.apple.driver.AppleThunderboltNHI 1.9.2 com.apple.iokit.IOThunderboltFamily 2.7.7 com.apple.iokit.IOFireWireFamily 4.5.5 com.apple.iokit.IO80211Family 530.5 com.apple.iokit.IOEthernetAVBController 1.0.2b1 com.apple.iokit.IONetworkingFamily 3.0 com.apple.iokit.IOAHCIFamily 2.5.1 com.apple.iokit.IOUSBUserClient 630.4.4 com.apple.iokit.IOUSBFamily 635.4.0 com.apple.driver.AppleEFINVRAM 2.0 com.apple.driver.AppleEFIRuntime 2.0 com.apple.iokit.IOHIDFamily 1.8.1 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 220.3 com.apple.kext.AppleMatch 1.0.0d1 com.apple.security.TMSafetyNet 7 com.apple.driver.DiskImages 345 com.apple.iokit.IOStorageFamily 1.8 com.apple.driver.AppleKeyStore 28.21 com.apple.driver.AppleACPIPlatform 1.8 com.apple.iokit.IOPCIFamily 2.8 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.corecrypto 1.0 Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f44 Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120 Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120 AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.17) Bluetooth: Version 4.1.7f2 12718, 3 service, 13 devices, 3 incoming serial ports Network Service: AirPort, AirPort, en1 Serial ATA Device: APPLE HDD ST500LM012, 500.11 GB Serial ATA Device: HL-DT-ST DVDRW GS31N USB Device: FT232R USB UART, 0x0403 (Future Technology Devices International Limited), 0x6001, 0x14100000 / 1 USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2 USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3 USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2 USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3 USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 6 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 7 USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5 USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 4 DEBUG.LOG: CHIRP 0.4.0 on Darwin Rich-Computer-2.local 12.5.0 Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64 x86_64 (Python 2.7.2) Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Intek_HR-2040 = IntekHR2040Radio Registered Polmar_DB-50M = PolmarDB50MRadio Registered Powerwerx_DB-750X = PowerwerxDB750XRadio Registered Baofeng_UV-3R = UV3RRadio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Baofeng_UV-82 = BaofengUV82Radio Registered Baofeng_UV-6 = BaofengUV6Radio Registered Baojie_BJ-UV55 = BaojieBJUV55Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-G71 = THG71Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Kenwood_TM-281 = TM281Radio Registered Kenwood_TM-471 = TM471Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered Yaesu_FT-1802M = FT1802Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_FT-7800_7900 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Yaesu_FT-90 = FT90Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Generic_CSV = CSVRadio Registered Commander_KG-UV = CommanderCSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered ARRL_Travel_Plus = TpeRadio Registered Generic_XML = XMLRadio Registered Baofeng_BF-888 = H777Radio Registered Icom_IC-208H = IC208Radio Registered Icom_IC-2100H = IC2100Radio Registered Icom_IC-2200H = IC2200Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-2820H = IC2820Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-T8A = ICT8ARadio Registered Icom_IC-W32A = ICW32ARadio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered Kenwood_HMK = HMKRadio Registered Kenwood_ITM = ITMRadio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered TYT_TH-UV3R = TYTUV3RRadio Registered TYT_TH-UVF8D = TYTUVF8DRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Baofeng_UV-B5 = BaofengUVB5 Registered Yaesu_VX-2 = VX2Radio Registered Yaesu_VX-3 = VX3Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-7 = VX7Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Yaesu_VX-8_GE = VX8GERadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Icon /usr/share/pixmaps/chirp.png not found Initialized MacOS support /Applications/chirp-0.4.0.app/Contents/MacOS/../Resources/chirp/chirpw:146: PangoWarning: error opening config file '../Resources/etc/pango/pangorc': No such file or directory a.show() Bandplan North American Band Plan has duplicates [1800000-2000000 160 Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ] Bandplan North American Band Plan has duplicates [1800000-1810000 Digimodes simplex , 1800000-1810000 Digital Modes simplex ] Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons simplex mode: CW , 1999000-2000000 Beacons simplex ] Bandplan North American Band Plan has duplicates [3500000-4000000 80 Meter Band simplex , 3500000-4000000 80 Meter Band simplex ] Bandplan North American Band Plan has duplicates [7000000-7300000 40 Meter Band simplex , 7000000-7300000 40 Meter Band simplex ] Bandplan North American Band Plan has duplicates [10100000-10150000 30 Meter Band simplex , 10100000-10150000 30 Meter Band simplex ] Bandplan North American Band Plan has duplicates [10130000-10140000 All narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ] Bandplan North American Band Plan has duplicates [10140000-10150000 All modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ] Bandplan North American Band Plan has duplicates [14000000-14350000 20 Meter Band simplex , 14000000-14350000 20 Meter Band simplex ] Bandplan North American Band Plan has duplicates [18068000-18168000 17 Meter Band simplex , 18068000-18168000 17 Meter Band simplex ] Bandplan North American Band Plan has duplicates [21000000-21450000 15 Meter Band simplex , 21000000-21450000 15 Meter Band simplex ] Bandplan North American Band Plan has duplicates [24890000-24990000 12 Meter Band simplex , 24890000-24990000 12 Meter Band simplex ] Bandplan North American Band Plan has duplicates [28000000-28070000 CW simplex mode: CW , 28000000-28070000 CW simplex mode: CW ] Bandplan North American Band Plan has duplicates [28150000-28190000 All narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode: CW ] Bandplan North American Band Plan has duplicates [29000000-29200000 All modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode: AM ] Bandplan North American Band Plan has duplicates [29300000-29510000 Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ] Bandplan North American Band Plan has duplicates [1800000-2000000 160 Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ] Bandplan North American Band Plan has duplicates [1800000-1810000 Digimodes simplex , 1800000-1810000 Digital Modes simplex ] Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons simplex mode: CW , 1999000-2000000 Beacons simplex ] Bandplan North American Band Plan has duplicates [3500000-4000000 80 Meter Band simplex , 3500000-4000000 80 Meter Band simplex ] Bandplan North American Band Plan has duplicates [7000000-7300000 40 Meter Band simplex , 7000000-7300000 40 Meter Band simplex ] Bandplan North American Band Plan has duplicates [10100000-10150000 30 Meter Band simplex , 10100000-10150000 30 Meter Band simplex ] Bandplan North American Band Plan has duplicates [10130000-10140000 All narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ] Bandplan North American Band Plan has duplicates [10140000-10150000 All modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ] Bandplan North American Band Plan has duplicates [14000000-14350000 20 Meter Band simplex , 14000000-14350000 20 Meter Band simplex ] Bandplan North American Band Plan has duplicates [18068000-18168000 17 Meter Band simplex , 18068000-18168000 17 Meter Band simplex ] Bandplan North American Band Plan has duplicates [21000000-21450000 15 Meter Band simplex , 21000000-21450000 15 Meter Band simplex ] Bandplan North American Band Plan has duplicates [24890000-24990000 12 Meter Band simplex , 24890000-24990000 12 Meter Band simplex ] Bandplan North American Band Plan has duplicates [28000000-28070000 CW simplex mode: CW , 28000000-28070000 CW simplex mode: CW ] Bandplan North American Band Plan has duplicates [28150000-28190000 All narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode: CW ] Bandplan North American Band Plan has duplicates [29000000-29200000 All modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode: AM ] Bandplan North American Band Plan has duplicates [29300000-29510000 Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ] DTCS Code supported: True DTCS Rx Code supported: False DTCS Pol supported: False Mode supported: True Offset supported: True Name supported: True Tune Step supported: True Name supported: True ToneSql supported: False Cross Mode supported: True Comment supported: False DTCS Code supported: True DTCS Rx Code supported: False DTCS Pol supported: False Mode supported: True Offset supported: True Name supported: True Tune Step supported: True Name supported: True ToneSql supported: False Cross Mode supported: True Comment supported: False Opening port after pre_upload prompt. Clone thread started

4 4

[chirp_users] CHIRP UNBricked my Wouxun
by John Kellas 07 Apr '14

07 Apr '14

A few years ago, I was programming some Wouxun UVD1P radios using either the factory software, or UVD Commander. Not paying attention, I inadvertently connected my VHF only Wouxun KG-816 and programmed it with the wrong software that contained UHF frequencies. When it rebooted, it only spoke chinese, and would only display 400mHz. I treid to recover it using factory reset, the out of band hack, and the OEM software, to no avail. So I put it in a drawer to be used for parts. Today I was programming another KG-816, so for the heck of it, I connected the bricked unit to see what would happen if I tried CHIRP. When it rebooted, it was back to speaking English, with all the VHF channels restored. I recall there seems to be a problem with US Versions of the UVD-1P. As that problem has not been seen in International Versions, I've always suspected it's due to the out of band hack. Anyway, whether CHIRP can help with that or not, it certainly seemed to achieve the ability to unbrick my 816, so maybe it can help with other bricked models as well. Regards, John

1 0

[chirp_users] New Daily Build
by Build System 07 Apr '14

07 Apr '14

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20140407 A list of the changes included in this build (since the last daily) follows: Changes for Build #270 [Marco Filippi <iz3gme.marco(a)gmail.com>] [NC-630A] Reverse skip logic completes #1525 [Jim Unroe <rock.unroe(a)gmail.com>] [NC-630A] Add Support for KYD NC-630A KYD NC630A UHF Handheld Add Spreadsheet Memory Editor support Add Basic Settings support #1525 [Jens Jensen <kd4tjx(a)yahoo.com>] [vx170] initial vx170 support #1183 [Jens Jensen <kd4tjx(a)yahoo.com>] [ft7800] updating ft7800 class to support subclassing #1183 prequisite changes to support subclassing for vx170 move power levels to class member use _block_size class member for chunk size in transfers [Marco Filippi <iz3gme.marco(a)gmail.com>] [kt-980HP] Add new UV-5R clone implement #1517 [Dan Smith <dsmith(a)danplanet.com>] Add updated French translation Related to #1533

1 0

[chirp_users] CHIRP for Android?
by Rich Barstow 06 Apr '14

06 Apr '14

Forgive me for asking, but I searched the last few months of mailing list archives, both on the user and the dev side, without finding a roadmap or references to an Android version. Are there any plans? If not, what's the best way to contact the developers to discuss? If yes, how can I offer assistance? (testing or coding)

5 7

[chirp_users] Support for Memory Banks
by Mike Shelby 05 Apr '14

05 Apr '14

I'm probably missing something rather basic. In CHIRP I do not see any support for memory banks. I have an IC-7000 that has 5 banks of 99 channels each. In my IC-91AD there are 26 bands that can manage 800 memory channels. I have 4 more radios that support the concept of Memory Banks. There are many more radios available to hams that have this same basic concept for managing and grouping memory into logical blocks, known as Memory Banks. What am I missing, how do you configure CHIRP to handle Memory Banks? Mike - W7RIS

4 3

Re: [chirp_users] chirp_users Digest, Vol 64, Issue 4
by jimbo 04 Apr '14

04 Apr '14

can any one tell me why ic-91ad radio and chirp well not work right on windows 7 i have use chirp many times on other radios but for some reason i cant get the this to work On 4/4/2014 12:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. New Daily Build (Build System) > 2. Re: New Daily Build (Anthony Danton) > 3. icom ic7100 (Anthony Danton) > 4. Re: icom ic7100 (Milton Hywatt) > 5. How to make bug report? (Tom ND5Y) > 6. Re: How to make bug report? (Jens J.) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 4 Apr 2014 00:07:36 -0700 (PDT) > From: Build System <donotreply(a)danplanet.com> > Subject: [chirp_users] New Daily Build > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <789994228.187.1396595256172.JavaMail.jenkins(a)eagle.danplanet.com> > Content-Type: text/plain; charset="utf-8" > > Greetings, > > A new daily build of CHIRP is available. This includes changes made > directly to the tree yesterday, and may include additional features, > bug fixes, and/or bugs. If you are interested in trying it, grab it > from the following location: > > http://trac.chirp.danplanet.com/chirp_daily/daily-20140404 > > > A list of the changes included in this build (since the last daily) > follows: > > Changes for Build #269 > [Dan Smith <dsmith(a)danplanet.com>] Add French translation from Matthieu > Related to #1429 > > [Dan Smith <dsmith(a)danplanet.com>] Added tag release_0_4_0 for changeset e91f09ca03d0 > > > > ------------------------------ > > Message: 2 > Date: Fri, 4 Apr 2014 08:19:05 +0100 > From: Anthony Danton <ardnw(a)aol.com> > Subject: Re: [chirp_users] New Daily Build > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: <2200B602-E142-40E9-9B7E-630119C245BE(a)aol.com> > Content-Type: text/plain; charset=us-ascii > > Do you know if the software will work with an Icom Ic7100 ?? > > > tony > > > > > On 4 Apr 2014, at 08:07, Build System wrote: > >> Greetings, >> >> A new daily build of CHIRP is available. This includes changes made >> directly to the tree yesterday, and may include additional features, >> bug fixes, and/or bugs. If you are interested in trying it, grab it >> from the following location: >> >> http://trac.chirp.danplanet.com/chirp_daily/daily-20140404 >> >> >> A list of the changes included in this build (since the last daily) >> follows: >> >> Changes for Build #269 >> [Dan Smith <dsmith(a)danplanet.com>] Add French translation from Matthieu >> Related to #1429 >> >> [Dan Smith <dsmith(a)danplanet.com>] Added tag release_0_4_0 for changeset e91f09ca03d0 >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > ------------------------------ > > Message: 3 > Date: Fri, 4 Apr 2014 08:39:29 +0100 > From: Anthony Danton <ardnw(a)aol.com> > Subject: [chirp_users] icom ic7100 > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: <564C6A85-311E-4B4B-BA09-8418AED7C4FA(a)aol.com> > Content-Type: text/plain; charset=us-ascii > > Do you know if the software will work with the Icom Ic 7100 ?? > > tony > > > ------------------------------ > > Message: 4 > Date: Fri, 4 Apr 2014 09:46:23 -0700 (PDT) > From: Milton Hywatt <mhywattt(a)yahoo.com> > Subject: Re: [chirp_users] icom ic7100 > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <1396629983.55024.YahooMailNeo(a)web162601.mail.bf1.yahoo.com> > Content-Type: text/plain; charset="us-ascii" > > If it does it will be listen in the program. Also > read this page: > > http://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios > > > > > ________________________________ > From: Anthony Danton <ardnw(a)aol.com> > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Sent: Friday, April 4, 2014 3:39 AM > Subject: [chirp_users] icom ic7100 > > > Do you know if the software will work with the Icom Ic 7100 ?? > > tony > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >

2 1

[chirp_users] How to make bug report?
by Tom ND5Y 04 Apr '14

04 Apr '14

What is the proper way to file a bug report? I tried downloading from a Yaesu FT-7800R and CHIRP can't handle some of the tone encode and decode modes correctly. Tom ND5Y

2 1

[chirp_users] icom ic7100
by Anthony Danton 04 Apr '14

04 Apr '14

Do you know if the software will work with the Icom Ic 7100 ?? tony

2 1

[chirp_users] New Daily Build
by Build System 04 Apr '14

04 Apr '14

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20140404 A list of the changes included in this build (since the last daily) follows: Changes for Build #269 [Dan Smith <dsmith(a)danplanet.com>] Add French translation from Matthieu Related to #1429 [Dan Smith <dsmith(a)danplanet.com>] Added tag release_0_4_0 for changeset e91f09ca03d0

2 1