# HG changeset patch # User Jim Unroe rock.unroe@gmail.com # Date 1460421134 14400 # Node ID eae0896c12a8e7a3f0c128f814a0539c7b5ba3b4 # Parent 3c0e8a9f2cc11c85fafc8007ff302d36c095f082 [BTECH] Add Basic Settings

Add settings from the OEM software "Optional Features" menu that are related to the internal menus of these radios.

releated to #3015

diff -r 3c0e8a9f2cc1 -r eae0896c12a8 chirp/drivers/btech.py --- a/chirp/drivers/btech.py Mon Apr 11 19:46:03 2016 -0400 +++ b/chirp/drivers/btech.py Mon Apr 11 20:32:14 2016 -0400 @@ -54,6 +54,50 @@ pttid:2; } memory[200];

+#seekto 0x0E00; +struct { + u8 tdr; + u8 unknown1; + u8 sql; + u8 unknown2[2]; + u8 tot; + u8 apo; // BTech radios use this as the Auto Power Off time + // other radios use this as pre-Time Out Alert + u8 unknown3; + u8 abr; + u8 beep; + u8 unknown4[4]; + u8 dtmfst; + u8 unknown5[2]; + u8 prisc; + u8 prich; + u8 screv; + u8 unknown6[2]; + u8 pttid; + u8 pttlt; + u8 unknown7; + u8 emctp; + u8 emcch; + u8 ringt; + u8 unknown8; + u8 camdf; + u8 cbmdf; + u8 sync; // BTech radios use this as the display sync setting + // other radios use this as the auto keypad lock setting + u8 ponmsg; + u8 wtled; + u8 rxled; + u8 txled; + u8 unknown9[5]; + u8 anil; + u8 reps; + u8 repm; + u8 tdrab; + u8 ste; + u8 rpste; + u8 rptdl; +} settings; + #seekto 0x1000; struct { char name[6]; @@ -108,6 +152,22 @@ OPTSIG_LIST = ["OFF", "DTMF", "2TONE", "5TONE"] SPMUTE_LIST = ["Tone/DTCS", "Tone/DTCS and Optsig", "Tone/DTCS or Optsig"]

+LIST_TOT = ["%s sec" % x for x in range(15, 615, 15)] +LIST_TOA = ["Off"] + ["%s seconds" % x for x in range(1, 11)] +LIST_APO = ["Off"] + ["%s minutes" % x for x in range(30, 330, 30)] +LIST_ABR = ["Off"] + ["%s seconds" % x for x in range(1, 51)] +LIST_DTMFST = ["OFF", "Keyboard", "ANI", "Keyboad + ANI"] +LIST_SCREV = ["TO (timeout)", "CO (carrier operated)", "SE (search)"] +LIST_EMCTP = ["TX alarm sound", "TX ANI", "Both"] +LIST_RINGT = ["Off"] + ["%s seconds" % x for x in range(1, 10)] +LIST_MDF = ["Frequency", "Channel", "Name"] +LIST_PONMSG = ["Full", "Message", "Battery voltage"] +LIST_COLOR = ["Off", "Blue", "Orange", "Purple"] +LIST_REPS = ["1000 Hz", "1450 Hz", "1750 Hz", "2100Hz"] +LIST_REPM = ["Off", "Carrier", "CTCSS or DCS", "Tone", "DTMF"] +LIST_RPTDL = ["Off"] + ["%s ms" % x for x in range(1, 10)] +LIST_ANIL = ["3", "4", "5"] + # This is a general serial timeout for all serial read functions. # Practice has show that about 0.7 sec will be enough to cover all radios. STIMEOUT = 0.7 @@ -613,7 +673,7 @@ global POWER_LEVELS

rf = chirp_common.RadioFeatures() - rf.has_settings = False + rf.has_settings = True rf.has_bank = False rf.has_tuning_step = False rf.can_odd_split = True @@ -932,6 +992,200 @@

return mem

+ def get_settings(self): + """Translate the bit in the mem_struct into settings in the UI""" + _mem = self._memobj + basic = RadioSettingGroup("basic", "Basic Settings") + top = RadioSettings(basic) + + # Basic + tdr = RadioSetting("settings.tdr", "Transceiver dual receive", + RadioSettingValueBoolean(_mem.settings.tdr)) + basic.append(tdr) + + sql = RadioSetting("settings.sql", "Squelch level", + RadioSettingValueInteger(0, 9, _mem.settings.sql)) + basic.append(sql) + + tot = RadioSetting("settings.tot", "Time out timer", + RadioSettingValueList(LIST_TOT, LIST_TOT[ + _mem.settings.tot])) + basic.append(tot) + + if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"): + apo = RadioSetting("settings.apo", "Auto power off timer", + RadioSettingValueList(LIST_APO, LIST_APO[ + _mem.settings.apo])) + basic.append(apo) + else: + toa = RadioSetting("settings.apo", "Time out alert timer", + RadioSettingValueList(LIST_TOA, LIST_TOA[ + _mem.settings.apo])) + basic.append(toa) + + abr = RadioSetting("settings.abr", "Backlight timer", + RadioSettingValueList(LIST_ABR, LIST_ABR[ + _mem.settings.abr])) + basic.append(abr) + + beep = RadioSetting("settings.beep", "Key beep", + RadioSettingValueBoolean(_mem.settings.beep)) + basic.append(beep) + + dtmfst = RadioSetting("settings.dtmfst", "DTMF side tone", + RadioSettingValueList(LIST_DTMFST, LIST_DTMFST[ + _mem.settings.dtmfst])) + basic.append(dtmfst) + + prisc = RadioSetting("settings.prisc", "Priority scan", + RadioSettingValueBoolean(_mem.settings.prisc)) + basic.append(prisc) + + prich = RadioSetting("settings.prich", "Priority channel", + RadioSettingValueInteger(0, 199, + _mem.settings.prich)) + basic.append(prich) + + screv = RadioSetting("settings.screv", "Scan resume method", + RadioSettingValueList(LIST_SCREV, LIST_SCREV[ + _mem.settings.screv])) + basic.append(screv) + + pttlt = RadioSetting("settings.pttlt", "PTT transmit delay", + RadioSettingValueInteger(0, 30, + _mem.settings.pttlt)) + basic.append(pttlt) + + emctp = RadioSetting("settings.emctp", "Alarm mode", + RadioSettingValueList(LIST_EMCTP, LIST_EMCTP[ + _mem.settings.emctp])) + basic.append(emctp) + + emcch = RadioSetting("settings.emcch", "Alarm channel", + RadioSettingValueInteger(0, 199, + _mem.settings.emcch)) + basic.append(emcch) + + ringt = RadioSetting("settings.ringt", "Ring time", + RadioSettingValueList(LIST_RINGT, LIST_RINGT[ + _mem.settings.ringt])) + basic.append(ringt) + + camdf = RadioSetting("settings.camdf", "Display mode A", + RadioSettingValueList(LIST_MDF, LIST_MDF[ + _mem.settings.camdf])) + basic.append(camdf) + + cbmdf = RadioSetting("settings.cbmdf", "Display mode B", + RadioSettingValueList(LIST_MDF, LIST_MDF[ + _mem.settings.cbmdf])) + basic.append(cbmdf) + + if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"): + sync = RadioSetting("settings.sync", "A/B channel sync", + RadioSettingValueBoolean(_mem.settings.sync)) + basic.append(sync) + else: + autolk = RadioSetting("settings.sync", "Auto keylock", + RadioSettingValueBoolean(_mem.settings.sync)) + basic.append(autolk) + + ponmsg = RadioSetting("settings.ponmsg", "Power-on message", + RadioSettingValueList(LIST_PONMSG, LIST_PONMSG[ + _mem.settings.ponmsg])) + basic.append(ponmsg) + + wtled = RadioSetting("settings.wtled", "Standby backlight Color", + RadioSettingValueList(LIST_COLOR, LIST_COLOR[ + _mem.settings.wtled])) + basic.append(wtled) + + rxled = RadioSetting("settings.rxled", "RX backlight Color", + RadioSettingValueList(LIST_COLOR, LIST_COLOR[ + _mem.settings.rxled])) + basic.append(rxled) + + txled = RadioSetting("settings.txled", "TX backlight Color", + RadioSettingValueList(LIST_COLOR, LIST_COLOR[ + _mem.settings.txled])) + basic.append(txled) + + anil = RadioSetting("settings.anil", "ANI length", + RadioSettingValueList(LIST_ANIL, LIST_ANIL[ + _mem.settings.anil])) + basic.append(anil) + + reps = RadioSetting("settings.reps", "Relay signal (tone burst)", + RadioSettingValueList(LIST_REPS, LIST_REPS[ + _mem.settings.reps])) + basic.append(reps) + + repm = RadioSetting("settings.repm", "Relay condition", + RadioSettingValueList(LIST_REPM, LIST_REPM[ + _mem.settings.repm])) + basic.append(repm) + + if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"): + tdrab = RadioSetting("settings.tdrab", "TDR return time", + RadioSettingValueList(LIST_ABR, LIST_ABR[ + _mem.settings.tdrab])) + basic.append(tdrab) + + ste = RadioSetting("settings.ste", "Squelch tail eliminate", + RadioSettingValueBoolean(_mem.settings.ste)) + basic.append(ste) + + rpste = RadioSetting("settings.rpste", "Repeater STE", + RadioSettingValueList(LIST_RINGT, LIST_RINGT[ + _mem.settings.rpste])) + basic.append(rpste) + + rptdl = RadioSetting("settings.rptdl", "Repeater STE delay", + RadioSettingValueList(LIST_RPTDL, LIST_RPTDL[ + _mem.settings.rptdl])) + basic.append(rptdl) + + return top + + def set_settings(self, settings): + _settings = self._memobj.settings + for element in settings: + if not isinstance(element, RadioSetting): + if element.get_name() == "fm_preset": + self._set_fm_preset(element) + else: + self.set_settings(element) + continue + else: + try: + name = element.get_name() + if "." in name: + bits = name.split(".") + obj = self._memobj + for bit in bits[:-1]: + if "/" in bit: + bit, index = bit.split("/", 1) + index = int(index) + obj = getattr(obj, bit)[index] + else: + obj = getattr(obj, bit) + setting = bits[-1] + else: + obj = _settings + setting = element.get_name() + + if element.has_apply_callback(): + LOG.debug("Using apply callback") + element.run_apply_callback() + elif setting == "vfomr": + setattr(obj, setting, not int(element.value)) + elif element.value.get_mutable(): + LOG.debug("Setting %s = %s" % (setting, element.value)) + setattr(obj, setting, element.value) + except Exception, e: + LOG.debug(element.get_name()) + raise + @classmethod def match_model(cls, filedata, filename): match_size = False