# HG changeset patch # User Dan Smith dsmith@danplanet.com # Date 1378685882 25200 # Node ID ec2693debe95d81aa0d01108236e04e380e8208b # Parent c12b1bd79697023039d0fb6af8322d1be02b742b [bf888] Finish BCL and BS flags and fix other inverted ones

This adds Busy Channel Lockout and Beat Shift per-memory settings. The power, mode, and skip flags were also inverted, so this fixes that as well as punts on further decoding memory data if we determine that it is empty.

Related to #701

diff -r c12b1bd79697 -r ec2693debe95 chirp/h777.py --- a/chirp/h777.py Sun Sep 08 17:17:56 2013 -0700 +++ b/chirp/h777.py Sun Sep 08 17:18:02 2013 -0700 @@ -38,9 +38,9 @@ u8 unknown3:1, unknown2:1, unknown1:1, - scanadd:1, - lowpower:1, - wide:1, + skip:1, + highpower:1, + narrow:1, beatshift:1, bcl:1; u8 unknown4[3]; @@ -76,8 +76,8 @@ range(0x0380, 0x03e0, 8)]

# TODO: Is it 1 watt? -H777_POWER_LEVELS = [chirp_common.PowerLevel("High", watts=5.00), - chirp_common.PowerLevel("Low", watts=1.00)] +H777_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1.00), + chirp_common.PowerLevel("High", watts=5.00)] VOICE_LIST = ["English", "Chinese"] SIDEKEYFUNCTION_LIST = ["Off", "Monitor", "Transmit Power", "Alarm"] TIMEOUTTIMER_LIST = ["Off", "30 seconds", "60 seconds", "90 seconds", @@ -245,8 +245,7 @@ rf.has_name = False rf.memory_bounds = (1, 16) rf.valid_bands = [(400000000, 470000000)] - rf.valid_power_levels = [chirp_common.PowerLevel("High", watts=5.00), - chirp_common.PowerLevel("Low", watts=1.0)] + rf.valid_power_levels = H777_POWER_LEVELS

return rf

@@ -298,12 +297,12 @@ # We'll consider any blank (i.e. 0MHz frequency) to be empty if mem.freq == 0: mem.empty = True + return mem

if _mem.rxfreq.get_raw() == "\xFF\xFF\xFF\xFF": mem.freq = 0 mem.empty = True - - # TODO: Support empty TX frequency + return mem

if int(_mem.rxfreq) == int(_mem.txfreq): mem.duplex = "" @@ -312,18 +311,22 @@ mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+" mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10

- mem.mode = not _mem.wide and "FM" or "NFM" - mem.power = H777_POWER_LEVELS[not _mem.lowpower] - # TODO: Invert lowpower flag? + mem.mode = not _mem.narrow and "FM" or "NFM" + mem.power = H777_POWER_LEVELS[_mem.highpower]

- if not _mem.scanadd: - mem.skip = "S" + mem.skip = _mem.skip and "S" or ""

txtone = self._decode_tone(_mem.txtone) rxtone = self._decode_tone(_mem.rxtone) chirp_common.split_tone_decode(mem, txtone, rxtone)

- # TODO: Set beatshift and bcl. + mem.extra = RadioSettingGroup("Extra", "extra") + rs = RadioSetting("bcl", "Busy Channel Lockout", + RadioSettingValueBoolean(not _mem.bcl)) + mem.extra.append(rs) + rs = RadioSetting("beatshift", "Beat Shift", + RadioSettingValueBoolean(not _mem.beatshift)) + mem.extra.append(rs)

return mem

@@ -349,16 +352,17 @@ else: _mem.txfreq = mem.freq / 10

- # TODO: Support empty TX frequency - txtone, rxtone = chirp_common.split_tone_encode(mem) self._encode_tone(_mem.txtone, *txtone) self._encode_tone(_mem.rxtone, *rxtone)

- _mem.wide = mem.mode != 0 - _mem.lowpower = mem.power == 1 - _mem.scanadd = mem.skip != "S" - # TODO: Set beatshift and bcl. + _mem.narrow = 'N' in mem.mode + _mem.highpower = mem.power == H777_POWER_LEVELS[1] + _mem.skip = mem.skip == "S" + + for setting in mem.extra: + # NOTE: Only two settings right now, both are inverted + setattr(_mem, setting.get_name(), not setting.value)

def get_settings(self): _settings = self._memobj.settings