# HG changeset patch # User Ray Cielencki rayslinky@gmail.com # Date 1558563009 14400 # Wed May 22 18:10:09 2019 -0400 # Node ID 76c88493bd3f873d355d08e66c624c6acf201b4d # Parent 7f46b0213c16e4082984a8ccecf1af4bd17624c7 [VX-6] Add settings support for Yaesu VX-6 #1289

diff -r 7f46b0213c16 -r 76c88493bd3f chirp/drivers/vx6.py --- a/chirp/drivers/vx6.py Sun May 12 00:35:53 2019 -0400 +++ b/chirp/drivers/vx6.py Wed May 22 18:10:09 2019 -0400 @@ -15,7 +15,11 @@

from chirp.drivers import yaesu_clone from chirp import chirp_common, directory, bitwise +from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings +from chirp.settings import RadioSettingValueString, RadioSettingValueList +from chirp.settings import RadioSettingValueBoolean from textwrap import dedent +import re

# flags.{even|odd}_pskip: These are actually "preferential *scan* channels". # Is that what they mean on other radios as well? @@ -37,15 +41,110 @@ # D Tone: Encodes DCS code, decodes tone # } MEM_FORMAT = """ +#seekto 0x010A; +struct { + u8 auto_power_off; + u8 arts_beep; + u8 bell; + u8 beep_level; + u8 arts_cwid_alpha[16]; + u8 unk1[2]; + u8 channel_counter_width; + u8 lcd_dimmer; + u8 last_dtmf; + u8 unk2; + u8 internet_code; + u8 last_internet_dtmf; + u8 unk3[3]; + u8 emergency; + u8 unk4[16]; + u8 lamp; + u8 lock; + u8 unk5; + u8 mic_gain; + u8 unk6[2]; + u8 on_timer; + u8 open_message_mode; + u8 open_message[6]; + u8 unk7; + u8 unk8:6, + pager_answer_back:1, + unk9:1; + u8 pager_rx_tone1; + u8 pager_rx_tone2; + u8 pager_tx_tone1; + u8 pager_tx_tone2; + u8 password[4]; + u8 ptt_delay; + u8 rf_squelch; + u8 rx_save; + u8 resume; + u8 unk10[5]; + u8 tx_timeout; + u8 wakeup; + u8 vfo_mode:1, + arts_cwid:1, + scan_lamp:1, + ts_speed:1, + unk11:1, + beep:1, + unk12:1, + dtmf_autodial:1; + u8 busy_led:1, + tone_search_mute:1, + int_autodial:1, + bclo:1, + edge_beep:1, + unk13:1, + dmr_wrt:1, + tx_saver:1; + u8 unk14:2, + smart_search:1, + unk15:3, + home_rev:1, + moni_tcall:1; + u8 unk16:3, + arts_interval:1, + unk17:3, + memory_method:1; + u8 unk18:2, + internet_mode:1, + wx_alert:1, + unk19:1, + att:1, + unk20:2; +} settings; + #seekto 0x018A; struct { - u16 in_use; + u16 in_use; } bank_used[24];

+#seekto 0x01D8; +u8 clock_shift; + #seekto 0x0214; -u16 banksoff1; +u16 banksoff1; + +#seekto 0x0248; +u8 lastsetting1; + #seekto 0x0294; -u16 banksoff2; +u16 banksoff2; + +#seekto 0x0248; +u8 lastsetting2; + +#seekto 0x02CA; +struct { + u8 memory[16]; +} dtmf[10]; + +#seekto 0x03CA; +struct { + u8 memory[8]; + u8 empty_ff[8]; +} internet_dtmf[64];

#seekto 0x097A; struct { @@ -95,15 +194,17 @@ DUPLEX = ["", "-", "+", "split"] MODES = ["FM", "AM", "WFM", "FM"] # last is auto TMODES = ["", "Tone", "TSQL", "DTCS"] +DTMFCHARSET = list("0123456789ABCD*#-") STEPS = [5.0, 10.0, 12.5, 15.0, 20.0, 25.0, 50.0, 100.0, 9.0, 200.0, 5.0] # last is auto, 9.0k and 200.0k are unadvertised

- -CHARSET = ["%i" % int(x) for x in range(0, 10)] + \ +CHARSET = ["%i" % int(x) for x in range(10)] + \ [chr(x) for x in range(ord("A"), ord("Z")+1)] + \ list(" +-/\x00[]__" + ("\x00" * 9) + "$%%\x00**.|=\\x00@") + \ list("\x00" * 100)

+PASS_CHARSET = list("0123456789ABCDEF") + POWER_LEVELS = [chirp_common.PowerLevel("Hi", watts=5.00), chirp_common.PowerLevel("L3", watts=2.50), chirp_common.PowerLevel("L2", watts=1.00), @@ -220,6 +321,42 @@ _block_lengths = [10, 32577] _block_size = 16

+ _APO = ("OFF", "30 min", "1 hour", "3 hour", "5 hour", "8 hour") + _ARTSBEEP = ("Off", "In Range", "Always") + _ARTS_INT = ("15 S", "25 S") + _BELL = ("OFF", "1", "3", "5", "8", "Continuous") + _BEEP_LEVEL = ["%i" % int(x) for x in range(1, 10)] + _CH_CNT = ("5 MHZ", "10 MHZ", "50 MHZ", "100 MHZ") + _DIM_LEVEL = ["%i" % int(x) for x in range(0, 13)] + _EMERGENCY = ("Beep", "Strobe", "Bp+Str", "Beam", "Bp+Bem", "CW", + "Bp+CW", "CWT") + _HOME_REV = ("HOME", "REV") + _INT_CD = ["%i" % int(x) for x in range(0, 10)] + \ + [chr(x) for x in range(ord("A"), ord("F")+1)] + _INT_MD = ("SRG: Sister Radio Group", "FRG: Friendly Radio Group") + _LAMP = ("Key", "Continuous", "Off") + _LOCK = ("Key", "Dial", "Key+Dial", "PTT", "Key+PTT", "Dial+PTT", "All") + _MAN_AUTO = ("Manual", "Auto") + _MEM_W_MD = ("Lower", "Next") + _MONI_TCALL = ("MONI", "T-CALL") + _NUM_1_9 = ["%i" % int(x) for x in range(1, 10)] + _NUM_0_9 = ["%i" % int(x) for x in range(10)] + _NUM_0_63 = ["%i" % int(x) for x in range(64)] + _NUM_1_50 = ["%i" % int(x) for x in range(1, 51)] + _ON_TIMER = ["OFF"] + \ + ["%02d:%02d" % (t / 60, t % 60) for t in range(10, 1450, 10)] + _OPEN_MSG = ("Off", "DC Voltage", "Message") + _PTT_DELAY = ("OFF", "20MS", "50MS", "100MS", "200MS") + _RF_SQL = ("OFF", "S1", "S2", "S3", "S4", "S5", + "S6", "S7", "S8", "S9", "S9+") + _RX_SAVE = ("OFF", "200 ms", "300 MS", "500 MS", "1 S", "2 S") + _RESUME = ("3 SEC", "5 SEC", "10 SEC", "BUSY", "HOLD") + _SMART_SEARCH = ("SINGLE", "CONT") + _TOT = ("OFF", "1MIN", "3MIN", "5MIN", "10MIN") + _TS_SPEED = ("FAST", "SLOW") + _VFO_MODE = ("ALL", "BAND") + _WAKEUP = ("OFF", "5S", "10S", "20S", "30S", "EAI") + @classmethod def get_prompts(cls): rp = chirp_common.RadioPrompts() @@ -259,6 +396,7 @@ rf.valid_name_length = 6 rf.can_odd_split = True rf.has_ctone = False + rf.has_settings = True return rf

def get_raw_memory(self, number): @@ -367,3 +505,371 @@

def get_bank_model(self): return VX6BankModel(self) + + def _decode_chars(self, inarr): + outstr = "" + for i in inarr: + if i == 0xFF: + break + outstr += CHARSET[i & 0x7F] + return outstr.rstrip() + + def _encode_chars(self, instr, length=16): + outarr = [] + instr = str(instr) + for i in range(length): + if i < len(instr): + outarr.append(CHARSET.index(instr[i])) + else: + outarr.append(0xFF) + return outarr + + def _get_settings(self): + _settings = self._memobj.settings + basic = RadioSettingGroup("basic", "Basic") + arts = RadioSettingGroup("arts", "ARTS") + dtmf = RadioSettingGroup("dtmf", "DTMF") + wires = RadioSettingGroup("wires", "WIRES") + misc = RadioSettingGroup("misc", "Misc") + top = RadioSettings(basic, arts, dtmf, wires, misc) + + # BASIC + + val = RadioSettingValueList( + self._APO, self._APO[_settings.auto_power_off]) + rs = RadioSetting("auto_power_off", "Auto Power Off", val) + basic.append(rs) + + val = RadioSettingValueList( + self._BEEP_LEVEL, self._BEEP_LEVEL[_settings.beep_level]) + rs = RadioSetting("beep_level", "Beep Level", val) + basic.append(rs) + + val = RadioSettingValueList( + self._DIM_LEVEL, self._DIM_LEVEL[_settings.lcd_dimmer]) + rs = RadioSetting("lcd_dimmer", "Dimmer Level", val) + basic.append(rs) + + val = RadioSettingValueList( + self._LAMP, self._LAMP[_settings.lamp]) + rs = RadioSetting("lamp", "Keypad Lamp", val) + basic.append(rs) + + val = RadioSettingValueList( + self._LOCK, self._LOCK[_settings.lock]) + rs = RadioSetting("lock", "Lock", val) + basic.append(rs) + + val = RadioSettingValueList( + self._NUM_1_9, self._NUM_1_9[_settings.mic_gain]) + rs = RadioSetting("mic_gain", "Mic Gain", val) + basic.append(rs) + + val = RadioSettingValueList( + self._OPEN_MSG, self._OPEN_MSG[_settings.open_message_mode]) + rs = RadioSetting("open_message_mode", + "Open Message Mode", val) + basic.append(rs) + + val = RadioSettingValueString(0, 6, + self._decode_chars( + _settings.open_message)) + val.set_charset(CHARSET) + rs = RadioSetting("open_message", "Opening Message", val) + basic.append(rs) + + passstr = "" + for c in _settings.password: + if c < len(PASS_CHARSET): + passstr += PASS_CHARSET[c] + val = RadioSettingValueString(0, 4, passstr) + val.set_charset(PASS_CHARSET) + rs = RadioSetting("password", "Password", val) + basic.append(rs) + + val = RadioSettingValueList( + self._RESUME, self._RESUME[_settings.resume]) + rs = RadioSetting("resume", "Scan Resume", val) + basic.append(rs) + + val = RadioSettingValueList( + self._MONI_TCALL, self._MONI_TCALL[_settings.moni_tcall]) + rs = RadioSetting("moni_tcall", "MONI/T-CALL switch", val) + basic.append(rs) + + rs = RadioSetting("scan_lamp", "Scan Lamp", + RadioSettingValueBoolean(_settings.scan_lamp)) + basic.append(rs) + + rs = RadioSetting("beep", "Keypad Beep", + RadioSettingValueBoolean(_settings.beep)) + basic.append(rs) + + rs = RadioSetting("busy_led", "Busy LED", + RadioSettingValueBoolean(_settings.busy_led)) + basic.append(rs) + + rs = RadioSetting("bclo", "Busy Channel Lock-Out", + RadioSettingValueBoolean(_settings.bclo)) + basic.append(rs) + + rs = RadioSetting("wx_alert", "WX Alert", + RadioSettingValueBoolean(_settings.wx_alert)) + basic.append(rs) + + rs = RadioSetting("att", "Attenuator", + RadioSettingValueBoolean(_settings.att)) + basic.append(rs) + + # ARTS + + val = RadioSettingValueList( + self._ARTS_INT, self._ARTS_INT[_settings.arts_interval]) + rs = RadioSetting("arts_interval", "ARTS Interval", val) + arts.append(rs) + + val = RadioSettingValueList( + self._ARTSBEEP, self._ARTSBEEP[_settings.arts_beep]) + rs = RadioSetting("arts_beep", "ARTS Beep", val) + arts.append(rs) + + rs = RadioSetting("arts_cwid", "ARTS Send CWID", + RadioSettingValueBoolean(_settings.arts_cwid)) + arts.append(rs) + + val = RadioSettingValueString(0, 16, + self._decode_chars( + _settings.arts_cwid_alpha)) + val.set_charset(CHARSET) + rs = RadioSetting("arts_cwid_alpha", "ARTS CW ID", val) + arts.append(rs) + + # DTMF + + val = RadioSettingValueList( + self._MAN_AUTO, self._MAN_AUTO[_settings.dtmf_autodial]) + rs = RadioSetting("dtmf_autodial", "DTMF Autodial", val) + dtmf.append(rs) + + val = RadioSettingValueList( + self._NUM_0_9, self._NUM_0_9[_settings.last_dtmf]) + rs = RadioSetting("last_dtmf", "Last DTMF Memory Set", val) + dtmf.append(rs) + + for i in range(10): + name = "dtmf_" + str(i) + dtmfsetting = self._memobj.dtmf[i] + dtmfstr = "" + for c in dtmfsetting.memory: + if c < len(DTMFCHARSET): + dtmfstr += DTMFCHARSET[c] + dtmfentry = RadioSettingValueString(0, 16, dtmfstr) + rs = RadioSetting(name, name.upper(), dtmfentry) + dtmf.append(rs) + + # WIRES + + val = RadioSettingValueList( + self._INT_CD, self._INT_CD[_settings.internet_code]) + rs = RadioSetting("internet_code", "Internet Code", val) + wires.append(rs) + + val = RadioSettingValueList( + self._INT_MD, self._INT_MD[_settings.internet_mode]) + rs = RadioSetting("internet_mode", + "Internet Link Connection mode", val) + wires.append(rs) + + val = RadioSettingValueList( + self._MAN_AUTO, self._MAN_AUTO[_settings.int_autodial]) + rs = RadioSetting("int_autodial", "Internet Autodial", val) + wires.append(rs) + + val = RadioSettingValueList( + self._NUM_0_63, self._NUM_0_63[_settings.last_internet_dtmf]) + rs = RadioSetting("last_internet_dtmf", + "Last Internet DTMF Memory Set", val) + wires.append(rs) + + for i in range(64): + name = "wires_dtmf_" + str(i) + dtmfsetting = self._memobj.internet_dtmf[i] + dtmfstr = "" + for c in dtmfsetting.memory: + if c < len(DTMFCHARSET): + dtmfstr += DTMFCHARSET[c] + dtmfentry = RadioSettingValueString(0, 8, dtmfstr) + rs = RadioSetting(name, name.upper(), dtmfentry) + wires.append(rs) + + # MISC + + val = RadioSettingValueList( + self._BELL, self._BELL[_settings.bell]) + rs = RadioSetting("bell", "CTCSS/DCS Bell", val) + misc.append(rs) + + val = RadioSettingValueList( + self._CH_CNT, self._CH_CNT[_settings.channel_counter_width]) + rs = RadioSetting("channel_counter_width", + "Channel Counter Search Width", val) + misc.append(rs) + + val = RadioSettingValueList( + self._EMERGENCY, self._EMERGENCY[_settings.emergency]) + rs = RadioSetting("emergency", "Emergency alarm", val) + misc.append(rs) + + val = RadioSettingValueList( + self._ON_TIMER, self._ON_TIMER[_settings.on_timer]) + rs = RadioSetting("on_timer", "On Timer", val) + misc.append(rs) + + rs = RadioSetting("pager_answer_back", "Pager Answer Back", + RadioSettingValueBoolean( + _settings.pager_answer_back)) + misc.append(rs) + + val = RadioSettingValueList( + self._NUM_1_50, self._NUM_1_50[_settings.pager_rx_tone1]) + rs = RadioSetting("pager_rx_tone1", "Pager RX Tone 1", val) + misc.append(rs) + + val = RadioSettingValueList( + self._NUM_1_50, self._NUM_1_50[_settings.pager_rx_tone2]) + rs = RadioSetting("pager_rx_tone2", "Pager RX Tone 2", val) + misc.append(rs) + + val = RadioSettingValueList( + self._NUM_1_50, self._NUM_1_50[_settings.pager_tx_tone1]) + rs = RadioSetting("pager_tx_tone1", "Pager TX Tone 1", val) + misc.append(rs) + + val = RadioSettingValueList( + self._NUM_1_50, self._NUM_1_50[_settings.pager_tx_tone2]) + rs = RadioSetting("pager_tx_tone2", "Pager TX Tone 2", val) + misc.append(rs) + + val = RadioSettingValueList( + self._PTT_DELAY, self._PTT_DELAY[_settings.ptt_delay]) + rs = RadioSetting("ptt_delay", "PTT Delay", val) + misc.append(rs) + + val = RadioSettingValueList( + self._RF_SQL, self._RF_SQL[_settings.rf_squelch]) + rs = RadioSetting("rf_squelch", "RF Squelch", val) + misc.append(rs) + + val = RadioSettingValueList( + self._RX_SAVE, self._RX_SAVE[_settings.rx_save]) + rs = RadioSetting("rx_save", "RX Save", val) + misc.append(rs) + + val = RadioSettingValueList( + self._TOT, self._TOT[_settings.tx_timeout]) + rs = RadioSetting("tx_timeout", "TOT", val) + misc.append(rs) + + val = RadioSettingValueList( + self._WAKEUP, self._WAKEUP[_settings.wakeup]) + rs = RadioSetting("wakeup", "Wakeup", val) + misc.append(rs) + + rs = RadioSetting("edge_beep", "Band-Edge Beep", + RadioSettingValueBoolean(_settings.edge_beep)) + misc.append(rs) + + val = RadioSettingValueList( + self._VFO_MODE, self._VFO_MODE[_settings.vfo_mode]) + rs = RadioSetting("vfo_mode", "VFO Band Edge Limiting", val) + misc.append(rs) + + rs = RadioSetting("tone_search_mute", "Tone Search Mute", + RadioSettingValueBoolean(_settings.tone_search_mute)) + misc.append(rs) + + val = RadioSettingValueList( + self._TS_SPEED, self._TS_SPEED[_settings.ts_speed]) + rs = RadioSetting("ts_speed", "Tone Search Speed", val) + misc.append(rs) + + rs = RadioSetting("dmr_wrt", "Direct Memory Recall Overwrite", + RadioSettingValueBoolean(_settings.dmr_wrt)) + misc.append(rs) + + rs = RadioSetting("tx_saver", "TX Battery Saver", + RadioSettingValueBoolean(_settings.tx_saver)) + misc.append(rs) + + val = RadioSettingValueList( + self._SMART_SEARCH, self._SMART_SEARCH[_settings.smart_search]) + rs = RadioSetting("smart_search", "Smart Search", val) + misc.append(rs) + + val = RadioSettingValueList( + self._HOME_REV, self._HOME_REV[_settings.home_rev]) + rs = RadioSetting("home_rev", "HM/RV(EMG)R/H key", val) + misc.append(rs) + + val = RadioSettingValueList( + self._MEM_W_MD, self._MEM_W_MD[_settings.memory_method]) + rs = RadioSetting("memory_method", "Memory Write Method", val) + misc.append(rs) + + return top + + def get_settings(self): + try: + return self._get_settings() + except: + import traceback + pring(traceback.format_exc()) + return None + + def set_settings(self, uisettings): + for element in uisettings: + if not isinstance(element, RadioSetting): + self.set_settings(element) + continue + if not element.changed(): + continue + try: + setting = element.get_name() + _settings = self._memobj.settings + if re.match('internet_dtmf_\d', setting): + # set dtmf fields + dtmfstr = str(element.value).strip() + newval = [] + for i in range(0, 8): + if i < len(dtmfstr): + newval.append(DTMFCHARSET.index(dtmfstr[i])) + else: + newval.append(0xFF) + idx = int(setting[-1:]) + _settings = self._memobj.internet_dtmf[idx] + _settings.memory = newval + continue + elif re.match('dtmf_\d', setting): + # set dtmf fields + dtmfstr = str(element.value).strip() + newval = [] + for i in range(0, 16): + if i < len(dtmfstr): + newval.append(DTMFCHARSET.index(dtmfstr[i])) + else: + newval.append(0xFF) + idx = int(setting[-1:]) + _settings = self._memobj.dtmf[idx] + _settings.memory = newval + continue + oldval = getattr(_settings, setting) + newval = element.value + if setting == "arts_cwid_alpha": + newval = self._encode_chars(newval) + elif setting == "open_message": + newval = self._encode_chars(newval, 6) + elif setting == "password": + newval = self._encode_chars(newval, 4) + setattr(_settings, setting, newval) + except Exception, e: + raise