# HG changeset patch # User David Fannin dfannin@sushisoft.com # Date 1402177529 25200 # Sat Jun 07 14:45:29 2014 -0700 # Node ID a510b95c0a987a269cb29faf10ff0803e48f6ed2 # Parent 796b6bf2476a0f0f0e8dc208f11df2298d09e67b [new model] new model tyt th9000 patch 004 #1035 TYT TH9000 VHF (2meter) Radio alpha version 4

Features working: Download/Upload to radio Display and Edit Memories Save image file Modes: None, Tone, TSQL Global Setting APO BG Color and Brightness Squelch Level TOT Radio Max Transmit Power Startup/Welcome Message TBST Freq TX/RX Freq Range Beep

Memory Setting Freq, Offset, Skip, Step, Ch Width, Name, Power, Mode, Tone-PL, TSQL-PL

Not Working DCS, Cross and Reverse Modes Display Mode (VFO/Mem) VFO MR Channel Lock Voice Prompt Tail Elim Type Bootup Password Memory: Reverse, TX Off, Compander, Talk Around, Scrambler

diff -r 796b6bf2476a -r a510b95c0a98 chirp/th9000vhf.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/th9000vhf.py Sat Jun 07 14:45:29 2014 -0700 @@ -0,0 +1,824 @@ +# Copyright 2012 Dan Smith dsmith@danplanet.com +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/. + +import os +import struct +import time + +from chirp import chirp_common +from chirp import directory +from chirp import memmap +from chirp import bitwise +from chirp import errors +from chirp import util +from chirp.settings import RadioSetting, RadioSettingGroup, \ + RadioSettingValueInteger, RadioSettingValueList, \ + RadioSettingValueBoolean, RadioSettingValueString, \ + RadioSettingValueFloat, InvalidValueError + +# +# Chirp Driver for TYT TH-9000 VHF (2 meter) Model +# by David Fannin dfannin@sushisoft.com, KK6DF +# +# Version 0.4 (Experimental - Known Bugs and Issues) +# Use for development purposes only! +# Features working: +# - Download from Radio +# - Display Memories (only None, Tone, TSQL signalling supported) +# - Save image file +# - memory map decoded (about 90%) +# - Upload to radio +# - Modification of memories +# - feature settings +# - added Startup ID label +# +# Features not working: +# - DCS , Cross Signaling +# - Skip channels + + +# +# Global Parameters +# +MMAPSIZE = 16128 +TONES = [62.5] + list(chirp_common.TONES) +TMODES = ['','Tone','DTCS'] +DUPLEXES = ['','err','-','+'] # index 2 not used +MODES = ['WFM','FM','NFM'] # 25k, 20k,15k bw +TUNING_STEPS=[ 5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0 ] # index 0-9 +POWER_LEVELS=[chirp_common.PowerLevel("High", watts=65), + chirp_common.PowerLevel("Mid", watts=25), + chirp_common.PowerLevel("Low", watts=10)] + +CROSS_MODES = chirp_common.CROSS_MODES +VALID_MODEL = ['TH-9000'] + +APO_LIST = [ "Off","30 min","1 hr","2 hrs" ] +BGCOLOR_LIST = ["Blue","Orange","Purple"] +BGBRIGHT_LIST = ["%s" % x for x in range(1,32)] +SQUELCH_LIST = ["Off"] + ["Level %s" % x for x in range(1,20)] +TIMEOUT_LIST = ["Off"] + ["%s min" % x for x in range(1,30)] +TXPWR_LIST = ["60W","25W"] # maximum power for Hi setting +TBSTFREQ_LIST = ["1750Hz","2100Hz","1000Hz","1450Hz"] +BEEP_LIST = ["Off","On"] + +SETTING_LISTS = { + "auto_power_off": APO_LIST, + "bg_color" : BGCOLOR_LIST, + "bg_brightness" : BGBRIGHT_LIST, + "squelch" : SQUELCH_LIST, + "timeout_timer" : TIMEOUT_LIST, + "choose_tx_power": TXPWR_LIST, + "tbst_freq" : TBSTFREQ_LIST, + "voice_prompt" : BEEP_LIST +} + + +# +# +# +""" +Overall Memory Map: + + Memory Map (Range 0x0100-3FF0, step 0x10): + + Field Start End Size + (hex) (hex) (hex) + + 1 Channel Set Flag 0100 011F 20 + 2 Channel Skip Flag 0120 013F 20 + 3 Blank/Unknown 0140 01EF B0 + 4 Unknown 01F0 01FF 10 + 5 TX/RX Range 0200 020F 10 + 6 Bootup Passwd 0210 021F 10 + 7 Options, Radio 0220 023F 20 + 8 Unknown 0240 019F + 8B Startup Label 03E0 03E7 07 + 9 Channel Bank 2000 38FF 1900 + Channel 000 2000 201F 20 + Channel 001 2020 202F 20 + ... + Channel 199 38E0 38FF 20 + 10 Blank/Unknown 3900 3FFF 6FF 14592 16383 1792 + Total Map Size 16128 (2^8 = 16384) + + +""" + +""" + TH9000/VHF memory map + section: 1 and 2: Channel Set/Skip Flags + + Channel Set (starts 0x100) : Channel Set bit is value 0 if a memory location in the channel bank is active. + Channel Skip (starts 0x120): Channel Skip bit is value 0 if a memory location in the channel bank is active. + + Both flag maps are a total 24 bytes in length, aligned on 32 byte records. + bit = 0 channel set/no skip, 1 is channel not set/skip + + to index a channel: + cbyte = channel / 8 ; + cbit = channel % 8 ; + setflag = csetflag[cbyte].c[cbit] ; + skipflag = cskipflag[cbyte].c[cbit] ; + + channel range is 0-199, range is 32 bytes (last 7 unknown) +""" + + +MEM_FORMAT = """ +#seekto 0x0100; +struct { + bit c[8]; +} csetflag[32]; + +struct { + u8 unknown0100[7]; +} ropt0100; + +#seekto 0x0120; +struct { + bit c[8]; +} cskipflag[32]; + +struct { + u8 unknown0120[7]; +} ropt0120; +""" + +""" + TH9000/VHF memory map + section: 5 TX/RX Range + used to set the TX/RX range of the radio (e.g. 144-148Mhz for 2 meter) + possible to set range to 136-172Mhz for tx/rx + +""" + + +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0200; +struct { + bbcd txrangelow[4]; + bbcd txrangehi[4]; + bbcd rxrangelow[4]; + bbcd rxrangehi[4]; +} freqrange; +""" + +""" + TH9000/VHF memory map + section: 6 bootup_passwd + used to set bootup passwd (see boot_passwd checkbox option) + + options - bootup password + + bytes:bit type description + --------------------------------------------------------------------------- + 6 u8 bootup_passwd[6] bootup passwd, 6 chars, numberic chars 30-39 , see boot_passwd checkbox to set + 10 u8 unknown; + +""" + +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0210; +struct { + u8 bootup_passwd[6]; + u8 unknown2010[10]; +} ropt0210; +""" + +""" + TH9000/VHF memory map + section: 7 Radio Options + used to set a number of radio options + + bytes:bit type description + --------------------------------------------------------------------------- + 1 u8 display_mode display mode, range 0-2, 0=freq,1=channel,2=name (selecting name affects vfo_mr) + 1 u8 vfo_mr; vfo_mr , 0=vfo, mr=1 + 1 u8 unknown; + 1 u8 squelch; squelch level, range 0-19, hex for menu + 1 u8 unknown[2]; + 1 u8 channel_lock; if display_mode[channel] selected, then lock=1,no lock =0 + 1 u8 unknown; + 1 u8 bg_brightness ; background brightness, range 0-21, hex, menu index + 1 u8 unknown; + 1 u8 bg_color ; bg color, menu index, blue 0 , orange 1, purple 2 + 1 u8 tbst_freq ; tbst freq , menu 0 = 1750Hz, 1=2100 , 2=1000 , 3=1450hz + 1 u8 timeout_timer; timeout timer, hex, value = minutes, 0= no timeout + 1 u8 unknown; + 1 u8 auto_power_off; auto power off, range 0-3, off,30min, 1hr, 2hr, hex menu index + 1 u8 voice_prompt; voice prompt, value 0,1 , Beep ON = 1, Beep Off = 2 + + description of function setup options, starting at 0x0230 + + bytes:bit type description + --------------------------------------------------------------------------- + 1 u8 // 0 + :4 unknown:6 + :1 elim_sql_tail:1 eliminate squelsh tail when no ctcss checkbox (1=checked) + :1 sql_key_function "squelch off" 1 , "squelch momentary off" 0 , menu index + 2 u8 unknown[2] /1-2 + 1 u8 // 3 + :4 unknown:4 + :1 inhibit_init_ops:1 //bit 5 + :1 unknownD:1 + :1 inhibit_setup_bg_chk:1 //bit 7 + :1 unknown:1 + 1 u8 tail_elim_type menu , (off=0,120=1,180=2), // 4 + 1 u8 choose_tx_power menu , (60w=0,25w=1) // 5 + 2 u8 unknown[2]; // 6-7 + 1 u8 bootup_passwd_flag checkbox 1=on, 0=off // 8 + 7 u8 unknown[7]; // 9-F + +""" + +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0220; +struct { + u8 display_mode; + u8 vfo_mr; + u8 unknown0220A; + u8 squelch; + u8 unknown0220B[2]; + u8 channel_lock; + u8 unknown0220C; + u8 bg_brightness; + u8 unknown0220D; + u8 bg_color; + u8 tbst_freq; + u8 timeout_timer; + u8 unknown0220E; + u8 auto_power_off; + u8 voice_prompt; + u8 unknown0230A:6, + elim_sql_tail:1, + sql_key_function:1; + u8 unknown0230B[2]; + u8 unknown0230C:4, + inhibit_init_ops:1, + unknown0230D:1, + inhibit_setup_bg_chk:1, + unknown0230E:1; + u8 tail_elim_type; + u8 choose_tx_power; + u8 unknown0230F[2]; + u8 bootup_passwd_flag; + u8 unknown0230G[7]; +} settings; +""" + +""" + TH9000/VHF memory map + section: 8B Startup Label + + bytes:bit type description + --------------------------------------------------------------------------- + 7 char start_label[7] label displayed at startup (usually your call sign) +""" +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x03E0; +struct { + char startname[7]; +} slabel; +""" + +""" + TH9000/VHF memory map + section: 9 Channel Bank + description of channel bank (200 channels , range 0-199) + Each 32 Byte (0x20 hex) record: + bytes:bit type description + --------------------------------------------------------------------------- + 4 bbcd freq[4] receive frequency in packed binary coded decimal + 4 bbcd offset[4] transmit offset in packed binary coded decimal (note: plus/minus direction set by 'duplex' field) + 1 u8 + :4 unknown:4 + :4 tuning_step:4 tuning step, menu index value from 0-9 + 5,6.25,8.33,10,12.5,15,20,25,30,50 + 1 u8 + :4 unknown:4 not yet decoded, used for DCS coding? + :2 channel_width:2 channel spacing, menu index value from 0-3 + 25,20,12.5 + :1 reverse:1 reverse flag, 0=off, 1=on (reverses tx and rx freqs) + :1 txoff:1 transmitt off flag, 0=transmit , 1=do not transmit + 1 u8 + :1 talkaround:1 talkaround flag, 0=off, 1=on (bypasses repeater) + :1 compander:1 compander flag, 0=off, 1=on (turns on/off voice compander option) + :2 unknown:2 + :2 power:2 tx power setting, value range 0-2, 0=hi,1=med,2=lo + :2 duplex:2 duplex settings, 0=simplex,2= minus(-) offset, 3= plus (+) offset (see offset field) + + 1 u8 + :4 unknown:4 + :2 rxtmode:2 rx tone mode, value range 0-2, 0=none, 1=CTCSS, 2=DCS (ctcss tone in field rxtone) + :2 txtmode:2 tx tone mode, value range 0-2, 0=none, 1=CTCSS, 3=DCS (ctcss tone in field txtone) + 1 u8 + :2 unknown:2 + :6 txtone:6 tx ctcss tone, menu index + 1 u8 + :2 unknown:2 + :6 rxtone:6 rx ctcss tone, menu index + 1 u8 txcode ?, not used for ctcss + 1 u8 rxcode ?, not used for ctcss + 3 u8 unknown[3] + 7 char name[7] 7 byte char string for channel name + 1 u8 + :6 unknown:6, + :2 busychannellockout:2 busy channel lockout option , 0=off, 1=repeater, 2=busy (lock out tx if channel busy) + 4 u8 unknownI[4]; + 1 u8 + :7 unknown:7 + :1 scrambler:1 scrambler flag, 0=off, 1=on (turns on tyt scrambler option) +""" + + + +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x2000; +struct { + bbcd freq[4]; + bbcd offset[4]; + u8 unknown2000A:4, + tuning_step:4; + u8 unknown2000B:4, + channel_width:2, + reverse:1, + txoff:1; + u8 talkaround:1, + compander:1, + unknown2000C:2, + power:2, + duplex:2; + u8 unknown2000D:4, + rxtmode:2, + txtmode:2; + u8 unknown2000E:2, + txtone:6; + u8 unknown2000F:2, + rxtone:6; + u8 txcode; + u8 rxcode; + u8 unknown2000G[3]; + char name[7]; + u8 unknown2000H:6, + busychannellockout:2; + u8 unknown2000I[4]; + u8 unknown2000J:7, + scrambler:1; +} memory[200] ; +""" + + +def _debug(string): + if "CHIRP_DEBUG" in os.environ or True: + print string + +def _echo_write(radio, data): + try: + radio.pipe.write(data) + radio.pipe.read(len(data)) + except Exception, e: + print "Error writing to radio: %s" % e + raise errors.RadioError("Unable to write to radio") + + +def _checksum(data): + cs = 0 + for byte in data: + cs += ord(byte) + return cs % 256 + +def _read(radio, length): + try: + data = radio.pipe.read(length) + except Exception, e: + print "Error reading from radio: %s" % e + raise errors.RadioError("Unable to read from radio") + + if len(data) != length: + print "Short read from radio (%i, expected %i)" % (len(data), + length) + print util.hexprint(data) + raise errors.RadioError("Short read from radio") + return data + + + +def _ident(radio): + radio.pipe.setTimeout(1) + _echo_write(radio,"PROGRAM") + response = radio.pipe.read(3) + if response != "QX\06": + print "Response was :\n%s" % util.hexprint(response) + raise errors.RadioError("Unsupported model") + _echo_write(radio, "\x02") + response = radio.pipe.read(16) + _debug(util.hexprint(response)) + if response[1:8] != "TH-9000": + print "Looking for:\n%s" % util.hexprint("TH-9000") + print "Response was:\n%s" % util.hexprint(response) + raise errors.RadioError("Unsupported model") + +def _send(radio, cmd, addr, length, data=None): + frame = struct.pack(">cHb", cmd, addr, length) + if data: + frame += data + frame += chr(_checksum(frame[1:])) + frame += "\x06" + _echo_write(radio, frame) + _debug("Sent:\n%s" % util.hexprint(frame)) + if data: + result = radio.pipe.read(1) + if result != "\x06": + print "Ack was: %s" % repr(result) + raise errors.RadioError("Radio did not accept block at %04x" % addr) + return + result = _read(radio, length + 6) + _debug("Got:\n%s" % util.hexprint(result)) + header = result[0:4] + data = result[4:-2] + ack = result[-1] + if ack != "\x06": + print "Ack was: %s" % repr(ack) + raise errors.RadioError("Radio NAK'd block at %04x" % addr) + _cmd, _addr, _length = struct.unpack(">cHb", header) + if _addr != addr or _length != _length: + print "Expected/Received:" + print " Length: %02x/%02x" % (length, _length) + print " Addr: %04x/%04x" % (addr, _addr) + raise errors.RadioError("Radio send unexpected block") + cs = _checksum(result[1:-2]) + if cs != ord(result[-2]): + print "Calculated: %02x" % cs + print "Actual: %02x" % ord(result[-2]) + raise errors.RadioError("Block at 0x%04x failed checksum" % addr) + return data + + +def _finish(radio): + endframe = "\x45\x4E\x44" + _echo_write(radio, endframe) + result = radio.pipe.read(1) + if result != "\x06": + print "Got:\n%s" % util.hexprint(result) + raise errors.RadioError("Radio did not finish cleanly") + +def do_download(radio): + + _ident(radio) + + _memobj = None + data = "" + + for start,end in radio._ranges: + for addr in range(start,end,0x10): + block = _send(radio,'R',addr,0x10) + data += block + status = chirp_common.Status() + status.cur = len(data) + status.max = end + status.msg = "Downloading from radio" + radio.status_fn(status) + + _finish(radio) + + return memmap.MemoryMap(data) + +def do_upload(radio): + + _ident(radio) + + for start,end in radio._ranges: + for addr in range(start,end,0x10): + if addr < 0x0100: + continue + block = radio._mmap[addr:addr+0x10] + _send(radio,'W',addr,len(block),block) + status = chirp_common.Status() + status.cur = addr + status.max = end + status.msg = "Uploading to Radio" + radio.status_fn(status) + + _finish(radio) + + + +@directory.register +class Th9000VHFRadio(chirp_common.CloneModeRadio): + """TYT TH-9000 VHF""" + VENDOR = "TYT" + MODEL = "TH9000" + BAUD_RATE = 9600 + _file_ident = "TH-9000" + + _memsize = MMAPSIZE + _ranges = [(0x0000,0x4000)] + + @classmethod + def get_prompts(cls): + rp = chirp_common.RadioPrompts() + rp.experimental = ("The TYT TH-9000 driver is an alpha version." + "Use only for testing and development" + "Proceed with Caution and backup your data" + "as you may lose it using this driver!") + return rp + + def get_features(self): + rf = chirp_common.RadioFeatures() + rf.has_settings = True + rf.has_bank = False + rf.has_cross = True + rf.has_tuning_step = False + rf.has_rx_dtcs = True + rf.valid_skips = ["","S"] + rf.memory_bounds = (0, 199) + rf.valid_name_length = 7 + rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "-" + rf.valid_modes = MODES + rf.valid_tmodes = chirp_common.TONE_MODES + rf.valid_cross_modes = CROSS_MODES + rf.valid_power_levels = POWER_LEVELS + rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES + rf.valid_bands = [(136000000, 174000000)] + return rf + + # Do a download of the radio from the serial port + def sync_in(self): + self._mmap = do_download(self) + self.process_mmap() + + # Do an upload of the radio to the serial port + def sync_out(self): + do_upload(self) + + def process_mmap(self): + self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) + + + # Return a raw representation of the memory object, which + # is very helpful for development + def get_raw_memory(self, number): + return repr(self._memobj.memory[number]) + + + # not working + def _get_dcs_index(self, _mem,which): + base = getattr(_mem, '%scode' % which) + extra = getattr(_mem, '%sdcsextra' % which) + return (int(extra) << 8) | int(base) + + def _set_dcs_index(self, _mem, which, index): + base = getattr(_mem, '%scode' % which) + extra = getattr(_mem, '%sdcsextra' % which) + base.set_value(index & 0xFF) + extra.set_value(index >> 8) + + + # Extract a high-level memory object from the low-level memory map + # This is called to populate a memory in the UI + def get_memory(self, number): + # Get a low-level memory object mapped to the image + _mem = self._memobj.memory[number] + + # get flag info + cbyte = number / 8 ; + cbit = 7 - (number % 8) ; + setflag = self._memobj.csetflag[cbyte].c[cbit]; + skipflag = self._memobj.cskipflag[cbyte].c[cbit]; + + mem = chirp_common.Memory() + + mem.number = number # Set the memory number + + if setflag == 1: + mem.empty = True + return mem + + mem.freq = int(_mem.freq) * 100 + mem.offset = int(_mem.offset) * 100 + mem.name = str(_mem.name).rstrip() # Set the alpha tag + mem.duplex = DUPLEXES[_mem.duplex] + mem.mode = MODES[_mem.channel_width] + mem.power = POWER_LEVELS[_mem.power] + + rxtone = txtone = None + + + rxmode = TMODES[_mem.rxtmode] + txmode = TMODES[_mem.txtmode] + + + rxpol = txpol = "" + + # doesn't work + if rxmode == "Tone": + rxpol = "" + rxtone = TONES[_mem.rxtone] + elif rxmode == "DTCS": + rxpol = "N" + rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'rx')] + + if txmode == "Tone": + txpol = "" + txtone = TONES[_mem.txtone] + elif txmode == "DTCS": + txpol = "N" + txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'tx')] + + + chirp_common.split_tone_decode(mem, + (txmode, txtone, txpol), + (rxmode, rxtone, rxpol)) + + mem.skip = "S" if skipflag == 1 else "" + + + # We'll consider any blank (i.e. 0MHz frequency) to be empty + if mem.freq == 0: + mem.empty = True + + return mem + + # Store details about a high-level memory to the memory map + # This is called when a user edits a memory in the UI + def set_memory(self, mem): + # Get a low-level memory object mapped to the image + + _mem = self._memobj.memory[mem.number] + + cbyte = mem.number / 8 + cbit = 7 - (mem.number % 8) + + if mem.empty: + self._memobj.csetflag[cbyte].c[cbit] = 1 + self._memobj.cskipflag[cbyte].c[cbit] = 1 + return + + self._memobj.csetflag[cbyte].c[cbit] = 0 + self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0 + + _mem.set_raw("\x00" * 32) + + _mem.freq = mem.freq / 100 # Convert to low-level frequency + _mem.offset = mem.offset / 100 # Convert to low-level frequency + + _mem.name = mem.name.ljust(7)[:7] # Store the alpha tag + _mem.duplex = DUPLEXES.index(mem.duplex) + + + try: + _mem.channel_width = MODES.index(mem.mode) + except ValueError: + _mem.channel_width = 0 + + ((txmode, txtone, txpol), + (rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem) + + _mem.txtmode = TMODES.index(txmode) + _mem.rxtmode = TMODES.index(rxmode) + + if txmode == "Tone": + _mem.txtone = TONES.index(txtone) + elif txmode == "DTCS": + self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone)) + + if rxmode == "Tone": + _mem.rxtone = TONES.index(rxtone) + elif rxmode == "DTCS": + self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone)) + + #_mem.txinv = txpol == "N" + #_mem.rxinv = rxpol == "N" + + + if mem.power: + _mem.power = POWER_LEVELS.index(mem.power) + else: + _mem.power = 0 + + def _get_settings(self): + _settings = self._memobj.settings + _freqrange = self._memobj.freqrange + _slabel = self._memobj.slabel + + basic = RadioSettingGroup("basic","Global Settings") + freqrange = RadioSettingGroup("freqrange","Frequency Ranges") + top = RadioSettingGroup("top","All Settings",basic,freqrange) + + def _filter(name): + filtered = "" + for char in str(name): + if char in chirp_common.CHARSET_ASCII: + filtered += char + else: + filtered += "" + return filtered + + val = RadioSettingValueString(0,7,_filter(_slabel.startname)) + rs = RadioSetting("startname","Startup Label",val) + basic.append(rs) + + rs = RadioSetting("bg_color","LCD Color", + RadioSettingValueList(BGCOLOR_LIST, BGCOLOR_LIST[_settings.bg_color])) + basic.append(rs) + + rs = RadioSetting("bg_brightness","LCD Brightness", + RadioSettingValueList(BGBRIGHT_LIST, BGBRIGHT_LIST[_settings.bg_brightness])) + basic.append(rs) + + rs = RadioSetting("squelch","Squelch Level", + RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[_settings.squelch])) + basic.append(rs) + + rs = RadioSetting("timeout_timer","Timeout Timer (TOT)", + RadioSettingValueList(TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout_timer])) + basic.append(rs) + + rs = RadioSetting("auto_power_off","Auto Power Off (APO)", + RadioSettingValueList(APO_LIST, APO_LIST[_settings.auto_power_off])) + basic.append(rs) + + rs = RadioSetting("voice_prompt","Beep Prompt", + RadioSettingValueList(BEEP_LIST, BEEP_LIST[_settings.voice_prompt])) + basic.append(rs) + + rs = RadioSetting("tbst_freq","Tone Burst Frequency", + RadioSettingValueList(TBSTFREQ_LIST, TBSTFREQ_LIST[_settings.tbst_freq])) + basic.append(rs) + + rs = RadioSetting("choose_tx_power","Max Level of TX Power", + RadioSettingValueList(TXPWR_LIST, TXPWR_LIST[_settings.choose_tx_power])) + basic.append(rs) + + rs = RadioSetting("txrangelow","TX Freq, Lower Limit (khz)", RadioSettingValueInteger(136000,144000, int(_freqrange.txrangelow)/10)) + freqrange.append(rs) + + rs = RadioSetting("txrangehi","TX Freq, Upper Limit (khz)", RadioSettingValueInteger(148000,174000,int(_freqrange.txrangehi)/10)) + freqrange.append(rs) + + rs = RadioSetting("rxrangelow","RX Freq, Lower Limit (khz)", RadioSettingValueInteger(136000,144000, int(_freqrange.rxrangelow)/10)) + freqrange.append(rs) + + rs = RadioSetting("rxrangehi","RX Freq, Upper Limit (khz)", RadioSettingValueInteger(148000,174000,int(_freqrange.rxrangehi)/10)) + freqrange.append(rs) + + return top + + def get_settings(self): + try: + return self._get_settings() + except: + import traceback + print "failed to parse settings" + traceback.print_exc() + return None + + def set_settings(self,settings): + _settings = self._memobj.settings + for element in settings: + if not isinstance(element,RadioSetting): + self.set_settings(element) + continue + else: + try: + name = element.get_name() + + if name in ["txrangelow","txrangehi","rxrangelow","rxrangehi"]: + print "setting %s = %s" % (name,int(element.value)*10) + setattr(self._memobj.freqrange,name,int(element.value)*10) + continue + + if name in ["startname"]: + print "setting %s = %s" % (name, element.value) + setattr(self._memobj.slabel,name,element.value) + continue + + obj = _settings + setting = element.get_name() + + if element.has_apply_callback(): + print "using apply callback" + element.run_apply_callback() + else: + print "Setting %s = %s" % (setting, element.value) + setattr(obj, setting, element.value) + except Exception, e: + print element.get_name() + raise + + @classmethod + def match_model(cls, filedata, filename): + return cls._file_ident in filedata[0x10:0x20]