# HG changeset patch # User Jim Unroe rock.unroe@gmail.com # Date 1487549731 18000 # Node ID 90b02a91d80c80d843f3c1de6ff7dc5470030f3b # Parent 0611c6c740ab74c0d939634765a52ebc2b5a8497 [KT7900D] Add Support for QYT KT7900D and KT8900D Mobile Radios

This patch modifies the btech.py driver to prepare it to support a new series of mobile radios that have an OLED color display.

Radio models initially supported: QYT KT7900D (quad band) QYT KT8900D (dual band)

New Model #4269

diff -r 0611c6c740ab -r 90b02a91d80c chirp/drivers/btech.py --- a/chirp/drivers/btech.py Thu Feb 16 18:28:49 2017 -0800 +++ b/chirp/drivers/btech.py Sun Feb 19 19:15:31 2017 -0500 @@ -1,4 +1,4 @@ -# Copyright 2016: +# Copyright 2016-2017: # * Pavel Milanes CO7WT, pavelmc@gmail.com # * Jim Unroe KC9HI, rock.unroe@gmail.com # @@ -30,6 +30,2710 @@ RadioSettingValueFloat, RadioSettings, InvalidValueError from textwrap import dedent

+# A note about the memmory in these radios +# +# The real memory of these radios extends to 0x4000 +# On read the factory software only uses up to 0x3200 +# On write it just uploads the contents up to 0x3100 +# +# The mem beyond 0x3200 holds the ID data + +MEM_SIZE = 0x4000 +BLOCK_SIZE = 0x40 +TX_BLOCK_SIZE = 0x10 +ACK_CMD = "\x06" +MODES = ["FM", "NFM"] +SKIP_VALUES = ["S", ""] +TONES = chirp_common.TONES +DTCS = sorted(chirp_common.DTCS_CODES + [645]) + +# lists related to "extra" settings +PTTID_LIST = ["OFF", "BOT", "EOT", "BOTH"] +PTTIDCODE_LIST = ["%s" % x for x in range(1, 16)] +OPTSIG_LIST = ["OFF", "DTMF", "2TONE", "5TONE"] +SPMUTE_LIST = ["Tone/DTCS", "Tone/DTCS and Optsig", "Tone/DTCS or Optsig"] + +# lists +LIST_AB = ["A", "B"] +LIST_ABCD = LIST_AB + ["C", "D"] +LIST_ANIL = ["3", "4", "5"] +LIST_APO = ["Off"] + ["%s minutes" % x for x in range(30, 330, 30)] +LIST_COLOR4 = ["Off", "Blue", "Orange", "Purple"] +LIST_COLOR8 = ["Black", "White", "Red", "Blue", "Green", "Yellow", "Indego", + "Purple", "Gray"] +LIST_DTMFST = ["OFF", "Keyboard", "ANI", "Keyboad + ANI"] +LIST_EMCTP = ["TX alarm sound", "TX ANI", "Both"] +LIST_EMCTPX = ["Off"] + LIST_EMCTP +LIST_LANGUA = ["English", "Chinese"] +LIST_MDF = ["Frequency", "Channel", "Name"] +LIST_OFF1TO9 = ["Off"] + ["%s seconds" % x for x in range(1, 10)] +LIST_OFF1TO10 = ["Off"] + ["%s seconds" % x for x in range(1, 11)] +LIST_OFF1TO50 = ["Off"] + ["%s seconds" % x for x in range(1, 51)] +LIST_PONMSG = ["Full", "Message", "Battery voltage"] +LIST_REPM = ["Off", "Carrier", "CTCSS or DCS", "Tone", "DTMF"] +LIST_REPS = ["1000 Hz", "1450 Hz", "1750 Hz", "2100Hz"] +LIST_RPTDL = ["Off"] + ["%s ms" % x for x in range(1, 10)] +LIST_SCMODE = ["Off", "PTT-SC", "MEM-SC", "PON-SC"] +LIST_SHIFT = ["Off", "+", "-"] +LIST_SKIPTX = ["Off", "Skip 1", "Skip 2"] +STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0] +LIST_STEP = [str(x) for x in STEPS] +LIST_SYNC = ["Off", "AB", "CD", "AB+CD"] +LIST_TMR = ["OFF", "M+A", "M+B", "M+C", "M+D", "M+A+B", "M+A+C", "M+A+D", + "M+B+C", "M+B+D", "M+C+D", "M+A+B+C", "M+A+B+D", "M+A+C+D", + "M+B+C+D", "A+B+C+D"] +LIST_TOT = ["%s sec" % x for x in range(15, 615, 15)] +LIST_TXDISP = ["Power", "Mic Volume"] +LIST_TXP = ["High", "Low"] +LIST_SCREV = ["TO (timeout)", "CO (carrier operated)", "SE (search)"] +LIST_VFOMR = ["Frequency", "Channel"] +LIST_WIDE = ["Wide", "Narrow"] + +# lists related to DTMF, 2TONE and 5TONE settings +LIST_5TONE_STANDARDS = ["CCIR1", "CCIR2", "PCCIR", "ZVEI1", "ZVEI2", "ZVEI3", + "PZVEI", "DZVEI", "PDZVEI", "EEA", "EIA", "EURO", + "CCITT", "NATEL", "MODAT", "none"] +LIST_5TONE_STANDARDS_without_none = ["CCIR1", "CCIR2", "PCCIR", "ZVEI1", + "ZVEI2", "ZVEI3", + "PZVEI", "DZVEI", "PDZVEI", "EEA", "EIA", + "EURO", "CCITT", "NATEL", "MODAT"] +LIST_5TONE_STANDARD_PERIODS = ["20", "30", "40", "50", "60", "70", "80", "90", + "100", "110", "120", "130", "140", "150", "160", + "170", "180", "190", "200"] +LIST_5TONE_DIGITS = ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "A", + "B", "C", "D", "E", "F"] +LIST_5TONE_DELAY = ["%s ms" % x for x in range(0, 1010, 10)] +LIST_5TONE_RESET = ["%s ms" % x for x in range(100, 8100, 100)] +LIST_5TONE_RESET_COLOR = ["%s ms" % x for x in range(100, 20100, 100)] +LIST_DTMF_SPEED = ["%s ms" % x for x in range(50, 2010, 10)] +LIST_DTMF_DIGITS = ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "A", "B", + "C", "D", "#", "*"] +LIST_DTMF_VALUES = [0x0A, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, + 0x0D, 0x0E, 0x0F, 0x00, 0x0C, 0x0B ] +LIST_DTMF_SPECIAL_DIGITS = [ "*", "#", "A", "B", "C", "D"] +LIST_DTMF_SPECIAL_VALUES = [ 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x00] +LIST_DTMF_DELAY = ["%s ms" % x for x in range(100, 4100, 100)] +CHARSET_DTMF_DIGITS = "0123456789AaBbCcDd#*" +LIST_2TONE_DEC = ["A-B", "A-C", "A-D", + "B-A", "B-C", "B-D", + "C-A", "C-B", "C-D", + "D-A", "D-B", "D-C"] +LIST_2TONE_RESPONSE = ["None", "Alert", "Transpond", "Alert+Transpond"] + +# This is a general serial timeout for all serial read functions. +# Practice has show that about 0.7 sec will be enough to cover all radios. +STIMEOUT = 0.7 + +# this var controls the verbosity in the debug and by default it's low (False) +# make it True and you will to get a very verbose debug.log +debug = False + +# valid chars on the LCD, Note that " " (space) is stored as "\xFF" +VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \ + "`{|}!"#$%&'()*+,-./:;<=>?@[]^_" + + +##### ID strings ##################################################### + +# BTECH UV2501 pre-production units +UV2501pp_fp = "M2C294" +# BTECH UV2501 pre-production units 2 + and 1st Gen radios +UV2501pp2_fp = "M29204" +# B-TECH UV-2501 second generation (2G) radios +UV2501G2_fp = "BTG214" +# B-TECH UV-2501 third generation (3G) radios +UV2501G3_fp = "BTG324" + +# B-TECH UV-2501+220 pre-production units +UV2501_220pp_fp = "M3C281" +# extra block read for the 2501+220 pre-production units +# the same for all of this radios so far +UV2501_220pp_id = " 280528" +# B-TECH UV-2501+220 +UV2501_220_fp = "M3G201" +# new variant, let's call it Generation 2 +UV2501_220G2_fp = "BTG211" +# B-TECH UV-2501+220 third generation (3G) +UV2501_220G3_fp = "BTG311" + +# B-TECH UV-5001 pre-production units + 1st Gen radios +UV5001pp_fp = "V19204" +# B-TECH UV-5001 alpha units +UV5001alpha_fp = "V28204" +# B-TECH UV-5001 second generation (2G) radios +UV5001G2_fp = "BTG214" +# B-TECH UV-5001 second generation (2G2) +UV5001G22_fp = "V2G204" +# B-TECH UV-5001 third generation (3G) +UV5001G3_fp = "BTG304" + +# special var to know when we found a BTECH Gen 3 +BTECH3 = [UV2501G3_fp, UV2501_220G3_fp, UV5001G3_fp] + + +# WACCOM Mini-8900 +MINI8900_fp = "M28854" + + +# QYT KT-UV980 +KTUV980_fp = "H28854" + +# QYT KT8900 +KT8900_fp = "M29154" +# New generations KT8900 +KT8900_fp1 = "M2C234" +KT8900_fp2 = "M2G1F4" +KT8900_fp3 = "M2G2F4" +KT8900_fp4 = "M2G304" +KT8900_fp5 = "M2G314" +# this radio has an extra ID +KT8900_id = " 303688" + +# KT8900R +KT8900R_fp = "M3G1F4" +# Second Generation +KT8900R_fp1 = "M3G214" +# another model +KT8900R_fp2 = "M3C234" +# another model G4? +KT8900R_fp3 = "M39164" +# another model +KT8900R_fp4 = "M3G314" +# this radio has an extra ID +KT8900R_id = "280528" + +# KT7900D (quad band) +KT7900D_fp = "VC4004" + +# KT8900D (dual band) +KT8900D_fp = "VC2002" + +# LUITON LT-588UV +LT588UV_fp = "V2G1F4" +# Added by rstrickoff gen 2 id +LT588UV_fp1 = "V2G214" + + +#### MAGICS +# for the Waccom Mini-8900 +MSTRING_MINI8900 = "\x55\xA5\xB5\x45\x55\x45\x4d\x02" +# for the B-TECH UV-2501+220 (including pre production ones) +MSTRING_220 = "\x55\x20\x15\x12\x12\x01\x4d\x02" +# for the QYT KT8900 & R +MSTRING_KT8900 = "\x55\x20\x15\x09\x16\x45\x4D\x02" +MSTRING_KT8900R = "\x55\x20\x15\x09\x25\x01\x4D\x02" +# magic string for all other models +MSTRING = "\x55\x20\x15\x09\x20\x45\x4d\x02" +# for the QYT KT7900D & KT8900D +MSTRING_KT8900D = "\x55\x20\x16\x08\x01\xFF\xDC\x02" + + +def _clean_buffer(radio): + """Cleaning the read serial buffer, hard timeout to survive an infinite + data stream""" + + # touching the serial timeout to optimize the flushing + # restored at the end to the default value + radio.pipe.timeout = 0.1 + dump = "1" + datacount = 0 + + try: + while len(dump) > 0: + dump = radio.pipe.read(100) + datacount += len(dump) + # hard limit to survive a infinite serial data stream + # 5 times bigger than a normal rx block (69 bytes) + if datacount > 345: + seriale = "Please check your serial port selection." + raise errors.RadioError(seriale) + + # restore the default serial timeout + radio.pipe.timeout = STIMEOUT + + except Exception: + raise errors.RadioError("Unknown error cleaning the serial buffer") + + +def _rawrecv(radio, amount): + """Raw read from the radio device, less intensive way""" + + data = "" + + try: + data = radio.pipe.read(amount) + + # DEBUG + if debug is True: + LOG.debug("<== (%d) bytes:\n\n%s" % + (len(data), util.hexprint(data))) + + # fail if no data is received + if len(data) == 0: + raise errors.RadioError("No data received from radio") + + # notice on the logs if short + if len(data) < amount: + LOG.warn("Short reading %d bytes from the %d requested." % + (len(data), amount)) + + except: + raise errors.RadioError("Error reading data from radio") + + return data + + +def _send(radio, data): + """Send data to the radio device""" + + try: + for byte in data: + radio.pipe.write(byte) + # Some OS (mainly Linux ones) are too fast on the serial and + # get the MCU inside the radio stuck in the early stages, this + # hits some models more than others. + # + # To cope with that we introduce a delay on the writes. + # Many option have been tested (delaying only after error occures, + # after short reads, only for linux, ...) + # Finally, a static delay was chosen as simplest of all solutions + # (Michael Wagner, OE4AMW) + # (for details, see issue 3993) + sleep(0.002) + + # DEBUG + if debug is True: + LOG.debug("==> (%d) bytes:\n\n%s" % + (len(data), util.hexprint(data))) + except: + raise errors.RadioError("Error sending data to radio") + + +def _make_frame(cmd, addr, length, data=""): + """Pack the info in the headder format""" + frame = "\x06" + struct.pack(">BHB", ord(cmd), addr, length) + # add the data if set + if len(data) != 0: + frame += data + + return frame + + +def _recv(radio, addr): + """Get data from the radio all at once to lower syscalls load""" + + # Get the full 69 bytes at a time to reduce load + # 1 byte ACK + 4 bytes header + 64 bytes of data (BLOCK_SIZE) + + # get the whole block + block = _rawrecv(radio, BLOCK_SIZE + 5) + + # basic check + if len(block) < (BLOCK_SIZE + 5): + raise errors.RadioError("Short read of the block 0x%04x" % addr) + + # checking for the ack + if block[0] != ACK_CMD: + raise errors.RadioError("Bad ack from radio in block 0x%04x" % addr) + + # header validation + c, a, l = struct.unpack(">BHB", block[1:5]) + if a != addr or l != BLOCK_SIZE or c != ord("X"): + LOG.debug("Invalid header for block 0x%04x" % addr) + LOG.debug("CMD: %s ADDR: %04x SIZE: %02x" % (c, a, l)) + raise errors.RadioError("Invalid header for block 0x%04x:" % addr) + + # return the data + return block[5:] + + +def _start_clone_mode(radio, status): + """Put the radio in clone mode and get the ident string, 3 tries""" + + # cleaning the serial buffer + _clean_buffer(radio) + + # prep the data to show in the UI + status.cur = 0 + status.msg = "Identifying the radio..." + status.max = 3 + radio.status_fn(status) + + try: + for a in range(0, status.max): + # Update the UI + status.cur = a + 1 + radio.status_fn(status) + + # send the magic word + _send(radio, radio._magic) + + # Now you get a x06 of ACK if all goes well + ack = radio.pipe.read(1) + + if ack == "\x06": + # DEBUG + LOG.info("Magic ACK received") + status.cur = status.max + radio.status_fn(status) + + return True + + return False + + except errors.RadioError: + raise + except Exception, e: + raise errors.RadioError("Error sending Magic to radio:\n%s" % e) + + +def _do_ident(radio, status, upload=False): + """Put the radio in PROGRAM mode & identify it""" + # set the serial discipline + radio.pipe.baudrate = 9600 + radio.pipe.parity = "N" + + # open the radio into program mode + if _start_clone_mode(radio, status) is False: + msg = "Radio did not enter clone mode" + # warning about old versions of QYT KT8900 + if radio.MODEL == "KT8900": + msg += ". You may want to try it as a WACCOM MINI-8900, there is a" + msg += " known variant of this radios that is a clone of it." + raise errors.RadioError(msg) + + # Ok, get the ident string + ident = _rawrecv(radio, 49) + + # basic check for the ident + if len(ident) != 49: + raise errors.RadioError("Radio send a short ident block.") + + # check if ident is OK + itis = False + for fp in radio._fileid: + if fp in ident: + # got it! + itis = True + # checking if we are dealing with a Gen 3 BTECH + if radio.VENDOR == "BTECH" and fp in BTECH3: + radio.btech3 = True + + break + + if itis is False: + LOG.debug("Incorrect model ID, got this:\n\n" + util.hexprint(ident)) + raise errors.RadioError("Radio identification failed.") + + # some radios needs a extra read and check for a code on it, this ones + # has the check value in the _id2 var, others simply False + if radio._id2 is not False: + # lower the timeout here as this radios are reseting due to timeout + radio.pipe.timeout = 0.05 + + # query & receive the extra ID + _send(radio, _make_frame("S", 0x3DF0, 16)) + id2 = _rawrecv(radio, 21) + + # WARNING !!!!!! + # different radios send a response with a different amount of data + # it seems that it's padded with \xff, \x20 and some times with \x00 + # we just care about the first 16, our magic string is in there + if len(id2) < 16: + raise errors.RadioError("The extra ID is short, aborting.") + + # ok, the correct string must be in the received data + if radio._id2 not in id2: + LOG.debug("Full *BAD* extra ID on the %s is: \n%s" % + (radio.MODEL, util.hexprint(id2))) + raise errors.RadioError("The extra ID is wrong, aborting.") + + # this radios need a extra request/answer here on the upload + # the amount of data received depends of the radio type + # + # also the first block of TX must no have the ACK at the beginning + # see _upload for this. + if upload is True: + # send an ACK + _send(radio, ACK_CMD) + + # the amount of data depend on the radio, so far we have two radios + # reading two bytes with an ACK at the end and just ONE with just + # one byte (QYT KT8900) + # the JT-6188 appears a clone of the last, but reads TWO bytes. + # + # we will read two bytes with a custom timeout to not penalize the + # users for this. + # + # we just check for a response and last byte being a ACK, that is + # the common stone for all radios (3 so far) + ack = _rawrecv(radio, 2) + + # checking + if len(ack) == 0 or ack[-1:] != ACK_CMD: + raise errors.RadioError("Radio didn't ACK the upload") + + # restore the default serial timeout + radio.pipe.timeout = STIMEOUT + + # DEBUG + LOG.info("Positive ident, this is a %s %s" % (radio.VENDOR, radio.MODEL)) + + return True + + +def _download(radio): + """Get the memory map""" + + # UI progress + status = chirp_common.Status() + + # put radio in program mode and identify it + _do_ident(radio, status) + + # the models that doesn't have the extra ID have to make a dummy read here + if radio._id2 is False: + _send(radio, _make_frame("S", 0, BLOCK_SIZE)) + discard = _rawrecv(radio, BLOCK_SIZE + 5) + + if debug is True: + LOG.info("Dummy first block read done, got this:\n\n %s", + util.hexprint(discard)) + + # reset the progress bar in the UI + status.max = MEM_SIZE / BLOCK_SIZE + status.msg = "Cloning from radio..." + status.cur = 0 + radio.status_fn(status) + + # cleaning the serial buffer + _clean_buffer(radio) + + data = "" + for addr in range(0, MEM_SIZE, BLOCK_SIZE): + # sending the read request + _send(radio, _make_frame("S", addr, BLOCK_SIZE)) + + # read + d = _recv(radio, addr) + + # aggregate the data + data += d + + # UI Update + status.cur = addr / BLOCK_SIZE + status.msg = "Cloning from radio..." + radio.status_fn(status) + + return data + + +def _upload(radio): + """Upload procedure""" + + # The UPLOAD mem is restricted to lower than 0x3100, + # so we will overide that here localy + MEM_SIZE = 0x3100 + + # UI progress + status = chirp_common.Status() + + # put radio in program mode and identify it + _do_ident(radio, status, True) + + # get the data to upload to radio + data = radio.get_mmap() + + # Reset the UI progress + status.max = MEM_SIZE / TX_BLOCK_SIZE + status.cur = 0 + status.msg = "Cloning to radio..." + radio.status_fn(status) + + # the radios that doesn't have the extra ID 'may' do a dummy write, I found + # that leveraging the bad ACK and NOT doing the dummy write is ok, as the + # dummy write is accepted (it actually writes to the mem!) by the radio. + + # cleaning the serial buffer + _clean_buffer(radio) + + # the fun start here + for addr in range(0, MEM_SIZE, TX_BLOCK_SIZE): + # getting the block of data to send + d = data[addr:addr + TX_BLOCK_SIZE] + + # build the frame to send + frame = _make_frame("X", addr, TX_BLOCK_SIZE, d) + + # first block must not send the ACK at the beginning for the + # ones that has the extra id, since this have to do a extra step + if addr == 0 and radio._id2 is not False: + frame = frame[1:] + + # send the frame + _send(radio, frame) + + # receiving the response + ack = _rawrecv(radio, 1) + + # basic check + if len(ack) != 1: + raise errors.RadioError("No ACK when writing block 0x%04x" % addr) + + if not ack in "\x06\x05": + raise errors.RadioError("Bad ACK writing block 0x%04x:" % addr) + + # UI Update + status.cur = addr / TX_BLOCK_SIZE + status.msg = "Cloning to radio..." + radio.status_fn(status) + + +def model_match(cls, data): + """Match the opened/downloaded image to the correct version""" + rid = data[0x3f70:0x3f76] + + if rid in cls._fileid: + return True + + return False + + +def _decode_ranges(low, high): + """Unpack the data in the ranges zones in the memmap and return + a tuple with the integer corresponding to the Mhz it means""" + ilow = int(low[0]) * 100 + int(low[1]) * 10 + int(low[2]) + ihigh = int(high[0]) * 100 + int(high[1]) * 10 + int(high[2]) + ilow *= 1000000 + ihigh *= 1000000 + + return (ilow, ihigh) + + +def _split(rf, f1, f2): + """Returns False if the two freqs are in the same band (no split) + or True otherwise""" + + # determine if the two freqs are in the same band + for low, high in rf.valid_bands: + if f1 >= low and f1 <= high and \ + f2 >= low and f2 <= high: + # if the two freqs are on the same Band this is not a split + return False + + # if you get here is because the freq pairs are split + return False + + +class BTechMobileCommon(chirp_common.CloneModeRadio, + chirp_common.ExperimentalRadio): + """BTECH's UV-5001 and alike radios""" + VENDOR = "BTECH" + MODEL = "" + IDENT = "" + BANDS = 2 + COLOR_LCD = False + NAME_LENGTH = 6 + _power_levels = [chirp_common.PowerLevel("High", watts=25), + chirp_common.PowerLevel("Low", watts=10)] + _vhf_range = (130000000, 180000000) + _220_range = (200000000, 271000000) + _uhf_range = (400000000, 521000000) + _350_range = (350000000, 391000000) + _upper = 199 + _magic = MSTRING + _fileid = None + _id2 = False + btech3 = False + + @classmethod + def get_prompts(cls): + rp = chirp_common.RadioPrompts() + rp.experimental = \ + ('This driver is experimental.\n' + '\n' + 'Please keep a copy of your memories with the original software ' + 'if you treasure them, this driver is new and may contain' + ' bugs.\n' + '\n' + ) + rp.pre_download = _(dedent("""\ + Follow these instructions to download your info: + + 1 - Turn off your radio + 2 - Connect your interface cable + 3 - Turn on your radio + 4 - Do the download of your radio data + + """)) + rp.pre_upload = _(dedent("""\ + Follow these instructions to upload your info: + + 1 - Turn off your radio + 2 - Connect your interface cable + 3 - Turn on your radio + 4 - Do the upload of your radio data + + """)) + return rp + + def get_features(self): + """Get the radio's features""" + + # we will use the following var as global + global POWER_LEVELS + + rf = chirp_common.RadioFeatures() + rf.has_settings = True + rf.has_bank = False + rf.has_tuning_step = False + rf.can_odd_split = True + rf.has_name = True + rf.has_offset = True + rf.has_mode = True + rf.has_dtcs = True + rf.has_rx_dtcs = True + rf.has_dtcs_polarity = True + rf.has_ctone = True + rf.has_cross = True + rf.valid_modes = MODES + rf.valid_characters = VALID_CHARS + rf.valid_name_length = self.NAME_LENGTH + rf.valid_duplexes = ["", "-", "+", "split", "off"] + rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross'] + rf.valid_cross_modes = [ + "Tone->Tone", + "DTCS->", + "->DTCS", + "Tone->DTCS", + "DTCS->Tone", + "->Tone", + "DTCS->DTCS"] + rf.valid_skips = SKIP_VALUES + rf.valid_dtcs_codes = DTCS + rf.memory_bounds = (0, self._upper) + + # power levels + POWER_LEVELS = self._power_levels + rf.valid_power_levels = POWER_LEVELS + + # normal dual bands + rf.valid_bands = [self._vhf_range, self._uhf_range] + + # 220 band + if self.BANDS == 3 or self.BANDS == 4: + rf.valid_bands.append(self._220_range) + + # 350 band + if self.BANDS == 4: + rf.valid_bands.append(self._350_range) + + return rf + + def sync_in(self): + """Download from radio""" + data = _download(self) + self._mmap = memmap.MemoryMap(data) + self.process_mmap() + + def sync_out(self): + """Upload to radio""" + try: + _upload(self) + except errors.RadioError: + raise + except Exception, e: + raise errors.RadioError("Error: %s" % e) + + def get_raw_memory(self, number): + return repr(self._memobj.memory[number]) + + def _decode_tone(self, val): + """Parse the tone data to decode from mem, it returns: + Mode (''|DTCS|Tone), Value (None|###), Polarity (None,N,R)""" + pol = None + + if val in [0, 65535]: + return '', None, None + elif val > 0x0258: + a = val / 10.0 + return 'Tone', a, pol + else: + if val > 0x69: + index = val - 0x6A + pol = "R" + else: + index = val - 1 + pol = "N" + + tone = DTCS[index] + return 'DTCS', tone, pol + + def _encode_tone(self, memval, mode, val, pol): + """Parse the tone data to encode from UI to mem""" + if mode == '' or mode is None: + memval.set_raw("\x00\x00") + elif mode == 'Tone': + memval.set_value(val * 10) + elif mode == 'DTCS': + # detect the index in the DTCS list + try: + index = DTCS.index(val) + if pol == "N": + index += 1 + else: + index += 0x6A + memval.set_value(index) + except: + msg = "Digital Tone '%d' is not supported" % value + LOG.error(msg) + raise errors.RadioError(msg) + else: + msg = "Internal error: invalid mode '%s'" % mode + LOG.error(msg) + raise errors.InvalidDataError(msg) + + def get_memory(self, number): + """Get the mem representation from the radio image""" + _mem = self._memobj.memory[number] + _names = self._memobj.names[number] + + # Create a high-level memory object to return to the UI + mem = chirp_common.Memory() + + # Memory number + mem.number = number + + if _mem.get_raw()[0] == "\xFF": + mem.empty = True + return mem + + # Freq and offset + mem.freq = int(_mem.rxfreq) * 10 + # tx freq can be blank + if _mem.get_raw()[4] == "\xFF": + # TX freq not set + mem.offset = 0 + mem.duplex = "off" + else: + # TX freq set + offset = (int(_mem.txfreq) * 10) - mem.freq + if offset != 0: + if _split(self.get_features(), mem.freq, int(_mem.txfreq) * 10): + mem.duplex = "split" + mem.offset = int(_mem.txfreq) * 10 + elif offset < 0: + mem.offset = abs(offset) + mem.duplex = "-" + elif offset > 0: + mem.offset = offset + mem.duplex = "+" + else: + mem.offset = 0 + + # name TAG of the channel + mem.name = str(_names.name).rstrip("\xFF").replace("\xFF", " ") + + # power + mem.power = POWER_LEVELS[int(_mem.power)] + + # wide/narrow + mem.mode = MODES[int(_mem.wide)] + + # skip + mem.skip = SKIP_VALUES[_mem.add] + + # tone data + rxtone = txtone = None + txtone = self._decode_tone(_mem.txtone) + rxtone = self._decode_tone(_mem.rxtone) + chirp_common.split_tone_decode(mem, txtone, rxtone) + + # Extra + mem.extra = RadioSettingGroup("extra", "Extra") + + scramble = RadioSetting("scramble", "Scramble", + RadioSettingValueBoolean(bool( + _mem.scramble))) + mem.extra.append(scramble) + + bcl = RadioSetting("bcl", "Busy channel lockout", + RadioSettingValueBoolean(bool(_mem.bcl))) + mem.extra.append(bcl) + + pttid = RadioSetting("pttid", "PTT ID", + RadioSettingValueList(PTTID_LIST, + PTTID_LIST[_mem.pttid])) + mem.extra.append(pttid) + + # validating scode + scode = _mem.scode if _mem.scode != 15 else 0 + pttidcode = RadioSetting("scode", "PTT ID signal code", + RadioSettingValueList( + PTTIDCODE_LIST, + PTTIDCODE_LIST[scode])) + mem.extra.append(pttidcode) + + optsig = RadioSetting("optsig", "Optional signaling", + RadioSettingValueList( + OPTSIG_LIST, + OPTSIG_LIST[_mem.optsig])) + mem.extra.append(optsig) + + spmute = RadioSetting("spmute", "Speaker mute", + RadioSettingValueList( + SPMUTE_LIST, + SPMUTE_LIST[_mem.spmute])) + mem.extra.append(spmute) + + return mem + + def set_memory(self, mem): + """Set the memory data in the eeprom img from the UI""" + # get the eprom representation of this channel + _mem = self._memobj.memory[mem.number] + _names = self._memobj.names[mem.number] + + mem_was_empty = False + # same method as used in get_memory for determining if mem is empty + # doing this BEFORE overwriting it with new values ... + if _mem.get_raw()[0] == "\xFF": + LOG.debug("This mem was empty before") + mem_was_empty = True + + # if empty memmory + if mem.empty: + # the channel itself + _mem.set_raw("\xFF" * 16) + # the name tag + _names.set_raw("\xFF" * 16) + return + + # frequency + _mem.rxfreq = mem.freq / 10 + + # duplex + if mem.duplex == "+": + _mem.txfreq = (mem.freq + mem.offset) / 10 + elif mem.duplex == "-": + _mem.txfreq = (mem.freq - mem.offset) / 10 + elif mem.duplex == "off": + for i in _mem.txfreq: + i.set_raw("\xFF") + elif mem.duplex == "split": + _mem.txfreq = mem.offset / 10 + else: + _mem.txfreq = mem.freq / 10 + + # tone data + ((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \ + chirp_common.split_tone_encode(mem) + self._encode_tone(_mem.txtone, txmode, txtone, txpol) + self._encode_tone(_mem.rxtone, rxmode, rxtone, rxpol) + + # name TAG of the channel + if len(mem.name) < self.NAME_LENGTH: + # we must pad to self.NAME_LENGTH chars, " " = "\xFF" + mem.name = str(mem.name).ljust(self.NAME_LENGTH, " ") + _names.name = str(mem.name).replace(" ", "\xFF") + + # power, # default power level is high + _mem.power = 0 if mem.power is None else POWER_LEVELS.index(mem.power) + + # wide/narrow + _mem.wide = MODES.index(mem.mode) + + # scan add property + _mem.add = SKIP_VALUES.index(mem.skip) + + # reseting unknowns, this have to be set by hand + _mem.unknown0 = 0 + _mem.unknown1 = 0 + _mem.unknown2 = 0 + _mem.unknown3 = 0 + _mem.unknown4 = 0 + _mem.unknown5 = 0 + _mem.unknown6 = 0 + + # extra settings + if len(mem.extra) > 0: + # there are setting, parse + LOG.debug("Extra-Setting supplied. Setting them.") + for setting in mem.extra: + setattr(_mem, setting.get_name(), setting.value) + else: + if mem.empty: + LOG.debug("New mem is empty.") + else: + LOG.debug("New mem is NOT empty") + # set extra-settings to default ONLY when apreviously empty or + # deleted memory was edited to prevent errors such as #4121 + if mem_was_empty : + LOG.debug("old mem was empty. Setting default for extras.") + _mem.spmute = 0 + _mem.optsig = 0 + _mem.scramble = 0 + _mem.bcl = 0 + _mem.pttid = 0 + _mem.scode = 0 + + return mem + + def get_settings(self): + """Translate the bit in the mem_struct into settings in the UI""" + _mem = self._memobj + basic = RadioSettingGroup("basic", "Basic Settings") + advanced = RadioSettingGroup("advanced", "Advanced Settings") + other = RadioSettingGroup("other", "Other Settings") + work = RadioSettingGroup("work", "Work Mode Settings") + top = RadioSettings(basic, advanced, other, work) + + # Basic + if self.COLOR_LCD: + tmr = RadioSetting("settings.tmr", "Transceiver multi-receive", + RadioSettingValueList( + LIST_TMR, + LIST_TMR[_mem.settings.tmr])) + basic.append(tmr) + else: + tdr = RadioSetting("settings.tdr", "Transceiver dual receive", + RadioSettingValueBoolean(_mem.settings.tdr)) + basic.append(tdr) + + sql = RadioSetting("settings.sql", "Squelch level", + RadioSettingValueInteger(0, 9, _mem.settings.sql)) + basic.append(sql) + + tot = RadioSetting("settings.tot", "Time out timer", + RadioSettingValueList( + LIST_TOT, + LIST_TOT[_mem.settings.tot])) + basic.append(tot) + + if self.VENDOR == "BTECH" or self.COLOR_LCD: + apo = RadioSetting("settings.apo", "Auto power off timer", + RadioSettingValueList( + LIST_APO, + LIST_APO[_mem.settings.apo])) + basic.append(apo) + else: + toa = RadioSetting("settings.apo", "Time out alert timer", + RadioSettingValueList( + LIST_OFF1TO10, + LIST_OFF1TO10[_mem.settings.apo])) + basic.append(toa) + + abr = RadioSetting("settings.abr", "Backlight timer", + RadioSettingValueList( + LIST_OFF1TO50, + LIST_OFF1TO50[_mem.settings.abr])) + basic.append(abr) + + beep = RadioSetting("settings.beep", "Key beep", + RadioSettingValueBoolean(_mem.settings.beep)) + basic.append(beep) + + dtmfst = RadioSetting("settings.dtmfst", "DTMF side tone", + RadioSettingValueList( + LIST_DTMFST, + LIST_DTMFST[_mem.settings.dtmfst])) + basic.append(dtmfst) + + if not self.COLOR_LCD: + prisc = RadioSetting("settings.prisc", "Priority scan", + RadioSettingValueBoolean( + _mem.settings.prisc)) + basic.append(prisc) + + prich = RadioSetting("settings.prich", "Priority channel", + RadioSettingValueInteger(0, 199, + _mem.settings.prich)) + basic.append(prich) + + screv = RadioSetting("settings.screv", "Scan resume method", + RadioSettingValueList( + LIST_SCREV, + LIST_SCREV[_mem.settings.screv])) + basic.append(screv) + + pttlt = RadioSetting("settings.pttlt", "PTT transmit delay", + RadioSettingValueInteger(0, 30, + _mem.settings.pttlt)) + basic.append(pttlt) + + emctp = RadioSetting("settings.emctp", "Alarm mode", + RadioSettingValueList( + LIST_EMCTP, + LIST_EMCTP[_mem.settings.emctp])) + basic.append(emctp) + + emcch = RadioSetting("settings.emcch", "Alarm channel", + RadioSettingValueInteger(0, 199, + _mem.settings.emcch)) + basic.append(emcch) + + if self.COLOR_LCD: + if _mem.settings.sigbp > 0x01: + val = 0x00 + else: + val = _mem.settings.sigbp + sigbp = RadioSetting("settings.sigbp", "Roger beep", + RadioSettingValueBoolean(val)) + basic.append(sigbp) + else: + ringt = RadioSetting("settings.ringt", "Ring time", + RadioSettingValueList( + LIST_OFF1TO9, + LIST_OFF1TO9[_mem.settings.ringt])) + basic.append(ringt) + + camdf = RadioSetting("settings.camdf", "Display mode A", + RadioSettingValueList( + LIST_MDF, + LIST_MDF[_mem.settings.camdf])) + basic.append(camdf) + + cbmdf = RadioSetting("settings.cbmdf", "Display mode B", + RadioSettingValueList( + LIST_MDF, + LIST_MDF[_mem.settings.cbmdf])) + basic.append(cbmdf) + + if self.COLOR_LCD: + ccmdf = RadioSetting("settings.ccmdf", "Display mode C", + RadioSettingValueList( + LIST_MDF, + LIST_MDF[_mem.settings.ccmdf])) + basic.append(ccmdf) + + cdmdf = RadioSetting("settings.cdmdf", "Display mode D", + RadioSettingValueList( + LIST_MDF, + LIST_MDF[_mem.settings.cdmdf])) + basic.append(cdmdf) + + langua = RadioSetting("settings.langua", "Language", + RadioSettingValueList( + LIST_LANGUA, + LIST_LANGUA[_mem.settings.langua])) + basic.append(langua) + + if self.VENDOR == "BTECH": + sync = RadioSetting("settings.sync", "A/B channel sync", + RadioSettingValueBoolean( + _mem.settings.sync)) + basic.append(sync) + else: + autolk = RadioSetting("settings.sync", "Auto keylock", + RadioSettingValueBoolean( + _mem.settings.sync)) + basic.append(autolk) + + if not self.COLOR_LCD: + ponmsg = RadioSetting("settings.ponmsg", "Power-on message", + RadioSettingValueList( + LIST_PONMSG, + LIST_PONMSG[_mem.settings.ponmsg])) + basic.append(ponmsg) + + if self.COLOR_LCD: + mainfc = RadioSetting("settings.mainfc", + "Main LCD foreground color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.mainfc])) + basic.append(mainfc) + + mainbc = RadioSetting("settings.mainbc", + "Main LCD background color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.mainbc])) + basic.append(mainbc) + + menufc = RadioSetting("settings.menufc", "Menu foreground color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.menufc])) + basic.append(menufc) + + menubc = RadioSetting("settings.menubc", "Menu background color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.menubc])) + basic.append(menubc) + + stafc = RadioSetting("settings.stafc", + "Top status foreground color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.stafc])) + basic.append(stafc) + + stabc = RadioSetting("settings.stabc", + "Top status background color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.stabc])) + basic.append(stabc) + + sigfc = RadioSetting("settings.sigfc", + "Bottom status foreground color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.sigfc])) + basic.append(sigfc) + + sigbc = RadioSetting("settings.sigbc", + "Bottom status background color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.sigbc])) + basic.append(sigbc) + + rxfc = RadioSetting("settings.rxfc", "Receiving character color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.rxfc])) + basic.append(rxfc) + + txfc = RadioSetting("settings.txfc", + "Transmitting character color", + RadioSettingValueList( + LIST_COLOR8, + LIST_COLOR8[_mem.settings.txfc])) + basic.append(txfc) + + txdisp = RadioSetting("settings.txdisp", + "Transmitting status display", + RadioSettingValueList( + LIST_TXDISP, + LIST_TXDISP[_mem.settings.txdisp])) + basic.append(txdisp) + else: + wtled = RadioSetting("settings.wtled", "Standby backlight Color", + RadioSettingValueList( + LIST_COLOR4, + LIST_COLOR4[_mem.settings.wtled])) + basic.append(wtled) + + rxled = RadioSetting("settings.rxled", "RX backlight Color", + RadioSettingValueList( + LIST_COLOR4, + LIST_COLOR4[_mem.settings.rxled])) + basic.append(rxled) + + txled = RadioSetting("settings.txled", "TX backlight Color", + RadioSettingValueList( + LIST_COLOR4, + LIST_COLOR4[_mem.settings.txled])) + basic.append(txled) + + anil = RadioSetting("settings.anil", "ANI length", + RadioSettingValueList( + LIST_ANIL, + LIST_ANIL[_mem.settings.anil])) + basic.append(anil) + + reps = RadioSetting("settings.reps", "Relay signal (tone burst)", + RadioSettingValueList( + LIST_REPS, + LIST_REPS[_mem.settings.reps])) + basic.append(reps) + + repm = RadioSetting("settings.repm", "Relay condition", + RadioSettingValueList( + LIST_REPM, + LIST_REPM[_mem.settings.repm])) + basic.append(repm) + + if self.VENDOR == "BTECH" or self.COLOR_LCD: + if self.COLOR_LCD: + tmrmr = RadioSetting("settings.tmrmr", "TMR return time", + RadioSettingValueList( + LIST_OFF1TO50, + LIST_OFF1TO50[_mem.settings.tmrmr])) + basic.append(tmrmr) + else: + tdrab = RadioSetting("settings.tdrab", "TDR return time", + RadioSettingValueList( + LIST_OFF1TO50, + LIST_OFF1TO50[_mem.settings.tdrab])) + basic.append(tdrab) + + ste = RadioSetting("settings.ste", "Squelch tail eliminate", + RadioSettingValueBoolean(_mem.settings.ste)) + basic.append(ste) + + rpste = RadioSetting("settings.rpste", "Repeater STE", + RadioSettingValueList( + LIST_OFF1TO9, + LIST_OFF1TO9[_mem.settings.rpste])) + basic.append(rpste) + + rptdl = RadioSetting("settings.rptdl", "Repeater STE delay", + RadioSettingValueList( + LIST_RPTDL, + LIST_RPTDL[_mem.settings.rptdl])) + basic.append(rptdl) + + if str(_mem.fingerprint.fp) in BTECH3: + mgain = RadioSetting("settings.mgain", "Mic gain", + RadioSettingValueInteger(0, 120, + _mem.settings.mgain)) + basic.append(mgain) + + if str(_mem.fingerprint.fp) in BTECH3 or self.COLOR_LCD: + dtmfg = RadioSetting("settings.dtmfg", "DTMF gain", + RadioSettingValueInteger(0, 60, + _mem.settings.dtmfg)) + basic.append(dtmfg) + + # Advanced + def _filter(name): + filtered = "" + for char in str(name): + if char in VALID_CHARS: + filtered += char + else: + filtered += " " + return filtered + + _msg = self._memobj.poweron_msg + if self.COLOR_LCD: + line1 = RadioSetting("poweron_msg.line1", + "Power-on message line 1", + RadioSettingValueString(0, 8, _filter( + _msg.line1))) + advanced.append(line1) + line2 = RadioSetting("poweron_msg.line2", + "Power-on message line 2", + RadioSettingValueString(0, 8, _filter( + _msg.line2))) + advanced.append(line2) + line3 = RadioSetting("poweron_msg.line3", + "Power-on message line 3", + RadioSettingValueString(0, 8, _filter( + _msg.line3))) + advanced.append(line3) + line4 = RadioSetting("poweron_msg.line4", + "Power-on message line 4", + RadioSettingValueString(0, 8, _filter( + _msg.line4))) + advanced.append(line4) + line5 = RadioSetting("poweron_msg.line5", + "Power-on message line 5", + RadioSettingValueString(0, 8, _filter( + _msg.line5))) + advanced.append(line5) + line6 = RadioSetting("poweron_msg.line6", + "Power-on message line 6", + RadioSettingValueString(0, 8, _filter( + _msg.line6))) + advanced.append(line6) + line7 = RadioSetting("poweron_msg.line7", + "Power-on message line 7", + RadioSettingValueString(0, 8, _filter( + _msg.line7))) + advanced.append(line7) + line8 = RadioSetting("poweron_msg.line8", "Static message", + RadioSettingValueString(0, 8, _filter( + _msg.line8))) + advanced.append(line8) + else: + line1 = RadioSetting("poweron_msg.line1", + "Power-on message line 1", + RadioSettingValueString(0, 6, _filter( + _msg.line1))) + advanced.append(line1) + line2 = RadioSetting("poweron_msg.line2", + "Power-on message line 2", + RadioSettingValueString(0, 6, _filter( + _msg.line2))) + advanced.append(line2) + + if self.MODEL in ("UV-2501", "UV-5001"): + vfomren = RadioSetting("settings2.vfomren", "VFO/MR switching", + RadioSettingValueBoolean( + _mem.settings2.vfomren)) + advanced.append(vfomren) + + reseten = RadioSetting("settings2.reseten", "RESET", + RadioSettingValueBoolean( + _mem.settings2.reseten)) + advanced.append(reseten) + + menuen = RadioSetting("settings2.menuen", "Menu", + RadioSettingValueBoolean( + _mem.settings2.menuen)) + advanced.append(menuen) + + # Other + def convert_bytes_to_limit(bytes): + limit = "" + for byte in bytes: + if byte < 10: + limit += chr(byte + 0x30) + else: + break + return limit + + if self.MODEL in ["UV-2501+220", "KT8900R"]: + _ranges = self._memobj.ranges220 + ranges = "ranges220" + else: + _ranges = self._memobj.ranges + ranges = "ranges" + + _limit = convert_bytes_to_limit(_ranges.vhf_low) + val = RadioSettingValueString(0, 3, _limit) + val.set_mutable(False) + vhf_low = RadioSetting("%s.vhf_low" % ranges, "VHF low", val) + other.append(vhf_low) + + _limit = convert_bytes_to_limit(_ranges.vhf_high) + val = RadioSettingValueString(0, 3, _limit) + val.set_mutable(False) + vhf_high = RadioSetting("%s.vhf_high" % ranges, "VHF high", val) + other.append(vhf_high) + + if self.BANDS == 3 or self.BANDS == 4: + _limit = convert_bytes_to_limit(_ranges.vhf2_low) + val = RadioSettingValueString(0, 3, _limit) + val.set_mutable(False) + vhf2_low = RadioSetting("%s.vhf2_low" % ranges, "VHF2 low", val) + other.append(vhf2_low) + + _limit = convert_bytes_to_limit(_ranges.vhf2_high) + val = RadioSettingValueString(0, 3, _limit) + val.set_mutable(False) + vhf2_high = RadioSetting("%s.vhf2_high" % ranges, "VHF2 high", val) + other.append(vhf2_high) + + _limit = convert_bytes_to_limit(_ranges.uhf_low) + val = RadioSettingValueString(0, 3, _limit) + val.set_mutable(False) + uhf_low = RadioSetting("%s.uhf_low" % ranges, "UHF low", val) + other.append(uhf_low) + + _limit = convert_bytes_to_limit(_ranges.uhf_high) + val = RadioSettingValueString(0, 3, _limit) + val.set_mutable(False) + uhf_high = RadioSetting("%s.uhf_high" % ranges, "UHF high", val) + other.append(uhf_high) + + if self.BANDS == 4: + _limit = convert_bytes_to_limit(_ranges.uhf2_low) + val = RadioSettingValueString(0, 3, _limit) + val.set_mutable(False) + uhf2_low = RadioSetting("%s.uhf2_low" % ranges, "UHF2 low", val) + other.append(uhf2_low) + + _limit = convert_bytes_to_limit(_ranges.uhf2_high) + val = RadioSettingValueString(0, 3, _limit) + val.set_mutable(False) + uhf2_high = RadioSetting("%s.uhf2_high" % ranges, "UHF2 high", val) + other.append(uhf2_high) + + val = RadioSettingValueString(0, 6, _filter(_mem.fingerprint.fp)) + val.set_mutable(False) + fp = RadioSetting("fingerprint.fp", "Fingerprint", val) + other.append(fp) + + + # Work + if self.COLOR_LCD: + dispab = RadioSetting("settings2.dispab", "Display", + RadioSettingValueList( + LIST_ABCD, + LIST_ABCD[_mem.settings2.dispab])) + work.append(dispab) + else: + dispab = RadioSetting("settings2.dispab", "Display", + RadioSettingValueList( + LIST_AB, + LIST_AB[_mem.settings2.dispab])) + work.append(dispab) + + if self.COLOR_LCD: + vfomra = RadioSetting("settings2.vfomra", "VFO/MR A mode", + RadioSettingValueList( + LIST_VFOMR, + LIST_VFOMR[_mem.settings2.vfomra])) + work.append(vfomra) + + vfomrb = RadioSetting("settings2.vfomrb", "VFO/MR B mode", + RadioSettingValueList( + LIST_VFOMR, + LIST_VFOMR[_mem.settings2.vfomrb])) + work.append(vfomrb) + + vfomrc = RadioSetting("settings2.vfomrc", "VFO/MR C mode", + RadioSettingValueList( + LIST_VFOMR, + LIST_VFOMR[_mem.settings2.vfomrc])) + work.append(vfomrc) + + vfomrd = RadioSetting("settings2.vfomrd", "VFO/MR D mode", + RadioSettingValueList( + LIST_VFOMR, + LIST_VFOMR[_mem.settings2.vfomrd])) + work.append(vfomrd) + else: + vfomr = RadioSetting("settings2.vfomr", "VFO/MR mode", + RadioSettingValueList( + LIST_VFOMR, + LIST_VFOMR[_mem.settings2.vfomr])) + work.append(vfomr) + + + keylock = RadioSetting("settings2.keylock", "Keypad lock", + RadioSettingValueBoolean(_mem.settings2.keylock)) + work.append(keylock) + + mrcha = RadioSetting("settings2.mrcha", "MR A channel", + RadioSettingValueInteger(0, 199, + _mem.settings2.mrcha)) + work.append(mrcha) + + mrchb = RadioSetting("settings2.mrchb", "MR B channel", + RadioSettingValueInteger(0, 199, + _mem.settings2.mrchb)) + work.append(mrchb) + + if self.COLOR_LCD: + mrchc = RadioSetting("settings2.mrchc", "MR C channel", + RadioSettingValueInteger(0, 199, + _mem.settings2.mrchc)) + work.append(mrchc) + + mrchd = RadioSetting("settings2.mrchd", "MR D channel", + RadioSettingValueInteger(0, 199, + _mem.settings2.mrchd)) + work.append(mrchd) + + def convert_bytes_to_freq(bytes): + real_freq = 0 + for byte in bytes: + real_freq = (real_freq * 10) + byte + return chirp_common.format_freq(real_freq * 10) + + def my_validate(value): + _vhf_lower = int(convert_bytes_to_limit(_ranges.vhf_low)) + _vhf_upper = int(convert_bytes_to_limit(_ranges.vhf_high)) + _uhf_lower = int(convert_bytes_to_limit(_ranges.uhf_low)) + _uhf_upper = int(convert_bytes_to_limit(_ranges.uhf_high)) + if self.BANDS == 3 or self.BANDS == 4: + _vhf2_lower = int(convert_bytes_to_limit(_ranges.vhf2_low)) + _vhf2_upper = int(convert_bytes_to_limit(_ranges.vhf2_high)) + if self.BANDS == 4: + _uhf2_lower = int(convert_bytes_to_limit(_ranges.uhf2_low)) + _uhf2_upper = int(convert_bytes_to_limit(_ranges.uhf2_high)) + + value = chirp_common.parse_freq(value) + msg = ("Can't be less then %i.0000") + if value > 99000000 and value < _vhf_lower * 1000000: + raise InvalidValueError(msg % (_vhf_lower)) + msg = ("Can't be betweeb %i.9975-%i.0000") + if self.BANDS == 2: + if (_vhf_upper + 1) * 1000000 <= value and \ + value < _uhf_lower * 1000000: + raise InvalidValueError(msg % (_vhf_upper, _uhf_lower)) + if self.BANDS == 3: + if (_vhf_upper + 1) * 1000000 <= value and \ + value < _vhf2_lower * 1000000: + raise InvalidValueError(msg % (_vhf_upper, _vhf2_lower)) + if (_vhf2_upper + 1) * 1000000 <= value and \ + value < _uhf_lower * 1000000: + raise InvalidValueError(msg % (_vhf2_upper, _uhf_lower)) + if self.BANDS == 4: + if (_vhf_upper + 1) * 1000000 <= value and \ + value < _vhf2_lower * 1000000: + raise InvalidValueError(msg % (_vhf_upper, _vhf2_lower)) + if (_vhf2_upper + 1) * 1000000 <= value and \ + value < _uhf2_lower * 1000000: + raise InvalidValueError(msg % (_vhf2_upper, _uhf2_lower)) + if (_uhf2_upper + 1) * 1000000 <= value and \ + value < _uhf_lower * 1000000: + raise InvalidValueError(msg % (_uhf2_upper, _uhf_lower)) + msg = ("Can't be greater then %i.9975") + if value > 99000000 and value >= _uhf_upper * 1000000: + raise InvalidValueError(msg % (_uhf_upper)) + return chirp_common.format_freq(value) + + def apply_freq(setting, obj): + value = chirp_common.parse_freq(str(setting.value)) / 10 + for i in range(7, -1, -1): + obj.freq[i] = value % 10 + value /= 10 + + val1a = RadioSettingValueString(0, 10, convert_bytes_to_freq( + _mem.vfo.a.freq)) + val1a.set_validate_callback(my_validate) + vfoafreq = RadioSetting("vfo.a.freq", "VFO A frequency", val1a) + vfoafreq.set_apply_callback(apply_freq, _mem.vfo.a) + work.append(vfoafreq) + + val1b = RadioSettingValueString(0, 10, convert_bytes_to_freq( + _mem.vfo.b.freq)) + val1b.set_validate_callback(my_validate) + vfobfreq = RadioSetting("vfo.b.freq", "VFO B frequency", val1b) + vfobfreq.set_apply_callback(apply_freq, _mem.vfo.b) + work.append(vfobfreq) + + if self.COLOR_LCD: + val1c = RadioSettingValueString(0, 10, convert_bytes_to_freq( + _mem.vfo.c.freq)) + val1c.set_validate_callback(my_validate) + vfocfreq = RadioSetting("vfo.c.freq", "VFO C frequency", val1c) + vfocfreq.set_apply_callback(apply_freq, _mem.vfo.c) + work.append(vfocfreq) + + val1d = RadioSettingValueString(0, 10, convert_bytes_to_freq( + _mem.vfo.d.freq)) + val1d.set_validate_callback(my_validate) + vfodfreq = RadioSetting("vfo.d.freq", "VFO D frequency", val1d) + vfodfreq.set_apply_callback(apply_freq, _mem.vfo.d) + work.append(vfodfreq) + + vfoashiftd = RadioSetting("vfo.a.shiftd", "VFO A shift", + RadioSettingValueList( + LIST_SHIFT, + LIST_SHIFT[_mem.vfo.a.shiftd])) + work.append(vfoashiftd) + + vfobshiftd = RadioSetting("vfo.b.shiftd", "VFO B shift", + RadioSettingValueList( + LIST_SHIFT, + LIST_SHIFT[_mem.vfo.b.shiftd])) + work.append(vfobshiftd) + + if self.COLOR_LCD: + vfocshiftd = RadioSetting("vfo.c.shiftd", "VFO C shift", + RadioSettingValueList( + LIST_SHIFT, + LIST_SHIFT[_mem.vfo.c.shiftd])) + work.append(vfocshiftd) + + vfodshiftd = RadioSetting("vfo.d.shiftd", "VFO D shift", + RadioSettingValueList( + LIST_SHIFT, + LIST_SHIFT[_mem.vfo.d.shiftd])) + work.append(vfodshiftd) + + def convert_bytes_to_offset(bytes): + real_offset = 0 + for byte in bytes: + real_offset = (real_offset * 10) + byte + return chirp_common.format_freq(real_offset * 1000) + + def apply_offset(setting, obj): + value = chirp_common.parse_freq(str(setting.value)) / 1000 + for i in range(5, -1, -1): + obj.offset[i] = value % 10 + value /= 10 + + if self.COLOR_LCD: + val1a = RadioSettingValueString(0, 10, convert_bytes_to_offset( + _mem.vfo.a.offset)) + vfoaoffset = RadioSetting("vfo.a.offset", + "VFO A offset (0.000-999.999)", val1a) + vfoaoffset.set_apply_callback(apply_offset, _mem.vfo.a) + work.append(vfoaoffset) + + val1b = RadioSettingValueString(0, 10, convert_bytes_to_offset( + _mem.vfo.b.offset)) + vfoboffset = RadioSetting("vfo.b.offset", + "VFO B offset (0.000-999.999)", val1b) + vfoboffset.set_apply_callback(apply_offset, _mem.vfo.b) + work.append(vfoboffset) + + val1c = RadioSettingValueString(0, 10, convert_bytes_to_offset( + _mem.vfo.c.offset)) + vfocoffset = RadioSetting("vfo.c.offset", + "VFO C offset (0.000-999.999)", val1c) + vfocoffset.set_apply_callback(apply_offset, _mem.vfo.c) + work.append(vfocoffset) + + val1d = RadioSettingValueString(0, 10, convert_bytes_to_offset( + _mem.vfo.d.offset)) + vfodoffset = RadioSetting("vfo.d.offset", + "VFO D offset (0.000-999.999)", val1d) + vfodoffset.set_apply_callback(apply_offset, _mem.vfo.d) + work.append(vfodoffset) + else: + val1a = RadioSettingValueString(0, 10, convert_bytes_to_offset( + _mem.vfo.a.offset)) + vfoaoffset = RadioSetting("vfo.a.offset", + "VFO A offset (0.000-99.999)", val1a) + vfoaoffset.set_apply_callback(apply_offset, _mem.vfo.a) + work.append(vfoaoffset) + + val1b = RadioSettingValueString(0, 10, convert_bytes_to_offset( + _mem.vfo.b.offset)) + vfoboffset = RadioSetting("vfo.b.offset", + "VFO B offset (0.000-99.999)", val1b) + vfoboffset.set_apply_callback(apply_offset, _mem.vfo.b) + work.append(vfoboffset) + + + vfoatxp = RadioSetting("vfo.a.power", "VFO A power", + RadioSettingValueList( + LIST_TXP, + LIST_TXP[_mem.vfo.a.power])) + work.append(vfoatxp) + + vfobtxp = RadioSetting("vfo.b.power", "VFO B power", + RadioSettingValueList( + LIST_TXP, + LIST_TXP[_mem.vfo.b.power])) + work.append(vfobtxp) + + if self.COLOR_LCD: + vfoctxp = RadioSetting("vfo.c.power", "VFO C power", + RadioSettingValueList( + LIST_TXP, + LIST_TXP[_mem.vfo.c.power])) + work.append(vfoctxp) + + vfodtxp = RadioSetting("vfo.d.power", "VFO D power", + RadioSettingValueList( + LIST_TXP, + LIST_TXP[_mem.vfo.d.power])) + work.append(vfodtxp) + + vfoawide = RadioSetting("vfo.a.wide", "VFO A bandwidth", + RadioSettingValueList( + LIST_WIDE, + LIST_WIDE[_mem.vfo.a.wide])) + work.append(vfoawide) + + vfobwide = RadioSetting("vfo.b.wide", "VFO B bandwidth", + RadioSettingValueList( + LIST_WIDE, + LIST_WIDE[_mem.vfo.b.wide])) + work.append(vfobwide) + + if self.COLOR_LCD: + vfocwide = RadioSetting("vfo.c.wide", "VFO C bandwidth", + RadioSettingValueList( + LIST_WIDE, + LIST_WIDE[_mem.vfo.c.wide])) + work.append(vfocwide) + + vfodwide = RadioSetting("vfo.d.wide", "VFO D bandwidth", + RadioSettingValueList( + LIST_WIDE, + LIST_WIDE[_mem.vfo.d.wide])) + work.append(vfodwide) + + vfoastep = RadioSetting("vfo.a.step", "VFO A step", + RadioSettingValueList( + LIST_STEP, + LIST_STEP[_mem.vfo.a.step])) + work.append(vfoastep) + + vfobstep = RadioSetting("vfo.b.step", "VFO B step", + RadioSettingValueList( + LIST_STEP, + LIST_STEP[_mem.vfo.b.step])) + work.append(vfobstep) + + if self.COLOR_LCD: + vfocstep = RadioSetting("vfo.c.step", "VFO C step", + RadioSettingValueList( + LIST_STEP, + LIST_STEP[_mem.vfo.c.step])) + work.append(vfocstep) + + vfodstep = RadioSetting("vfo.d.step", "VFO D step", + RadioSettingValueList( + LIST_STEP, + LIST_STEP[_mem.vfo.d.step])) + work.append(vfodstep) + + vfoaoptsig = RadioSetting("vfo.a.optsig", "VFO A optional signal", + RadioSettingValueList( + OPTSIG_LIST, + OPTSIG_LIST[_mem.vfo.a.optsig])) + work.append(vfoaoptsig) + + vfoboptsig = RadioSetting("vfo.b.optsig", "VFO B optional signal", + RadioSettingValueList( + OPTSIG_LIST, + OPTSIG_LIST[_mem.vfo.b.optsig])) + work.append(vfoboptsig) + + if self.COLOR_LCD: + vfocoptsig = RadioSetting("vfo.c.optsig", "VFO C optional signal", + RadioSettingValueList( + OPTSIG_LIST, + OPTSIG_LIST[_mem.vfo.c.optsig])) + work.append(vfocoptsig) + + vfodoptsig = RadioSetting("vfo.d.optsig", "VFO D optional signal", + RadioSettingValueList( + OPTSIG_LIST, + OPTSIG_LIST[_mem.vfo.d.optsig])) + work.append(vfodoptsig) + + vfoaspmute = RadioSetting("vfo.a.spmute", "VFO A speaker mute", + RadioSettingValueList( + SPMUTE_LIST, + SPMUTE_LIST[_mem.vfo.a.spmute])) + work.append(vfoaspmute) + + vfobspmute = RadioSetting("vfo.b.spmute", "VFO B speaker mute", + RadioSettingValueList( + SPMUTE_LIST, + SPMUTE_LIST[_mem.vfo.b.spmute])) + work.append(vfobspmute) + + if self.COLOR_LCD: + vfocspmute = RadioSetting("vfo.c.spmute", "VFO C speaker mute", + RadioSettingValueList( + SPMUTE_LIST, + SPMUTE_LIST[_mem.vfo.c.spmute])) + work.append(vfocspmute) + + vfodspmute = RadioSetting("vfo.d.spmute", "VFO D speaker mute", + RadioSettingValueList( + SPMUTE_LIST, + SPMUTE_LIST[_mem.vfo.d.spmute])) + work.append(vfodspmute) + + vfoascr = RadioSetting("vfo.a.scramble", "VFO A scramble", + RadioSettingValueBoolean( + _mem.vfo.a.scramble)) + work.append(vfoascr) + + vfobscr = RadioSetting("vfo.b.scramble", "VFO B scramble", + RadioSettingValueBoolean( + _mem.vfo.b.scramble)) + work.append(vfobscr) + + if self.COLOR_LCD: + vfocscr = RadioSetting("vfo.c.scramble", "VFO C scramble", + RadioSettingValueBoolean( + _mem.vfo.c.scramble)) + work.append(vfocscr) + + vfodscr = RadioSetting("vfo.d.scramble", "VFO D scramble", + RadioSettingValueBoolean( + _mem.vfo.d.scramble)) + work.append(vfodscr) + + vfoascode = RadioSetting("vfo.a.scode", "VFO A PTT-ID", + RadioSettingValueList( + PTTIDCODE_LIST, + PTTIDCODE_LIST[_mem.vfo.a.scode])) + work.append(vfoascode) + + vfobscode = RadioSetting("vfo.b.scode", "VFO B PTT-ID", + RadioSettingValueList( + PTTIDCODE_LIST, + PTTIDCODE_LIST[_mem.vfo.b.scode])) + work.append(vfobscode) + + if self.COLOR_LCD: + vfocscode = RadioSetting("vfo.c.scode", "VFO C PTT-ID", + RadioSettingValueList( + PTTIDCODE_LIST, + PTTIDCODE_LIST[_mem.vfo.c.scode])) + work.append(vfocscode) + + vfodscode = RadioSetting("vfo.d.scode", "VFO D PTT-ID", + RadioSettingValueList( + PTTIDCODE_LIST, + PTTIDCODE_LIST[_mem.vfo.d.scode])) + work.append(vfodscode) + + pttid = RadioSetting("settings.pttid", "PTT ID", + RadioSettingValueList( + PTTID_LIST, + PTTID_LIST[_mem.settings.pttid])) + work.append(pttid) + + if not self.COLOR_LCD: + #FM presets + fm_presets = RadioSettingGroup("fm_presets", "FM Presets") + top.append(fm_presets) + + def fm_validate(value): + if value == 0: + return chirp_common.format_freq(value) + if not (87.5 <= value and value <= 108.0): # 87.5-108MHz + msg = ("FM-Preset-Frequency: Must be between 87.5 and 108 MHz") + raise InvalidValueError(msg) + return value + + def apply_fm_preset_name(setting, obj): + valstring = str (setting.value) + for i in range(0,6): + if valstring[i] in VALID_CHARS: + obj[i] = valstring[i] + else: + obj[i] = '0xff' + + def apply_fm_freq(setting, obj): + value = chirp_common.parse_freq(str(setting.value)) / 10 + for i in range(7, -1, -1): + obj.freq[i] = value % 10 + value /= 10 + + _presets = self._memobj.fm_radio_preset + i = 1 + for preset in _presets: + line = RadioSetting("fm_presets_"+ str(i), + "Station name " + str(i), + RadioSettingValueString(0, 6, _filter( + preset.broadcast_station_name))) + line.set_apply_callback(apply_fm_preset_name, + preset.broadcast_station_name) + + val = RadioSettingValueFloat(0, 108, + convert_bytes_to_freq( + preset.freq)) + fmfreq = RadioSetting("fm_presets_"+ str(i) + "_freq", + "Frequency "+ str(i), val) + val.set_validate_callback(fm_validate) + fmfreq.set_apply_callback(apply_fm_freq, preset) + fm_presets.append(line) + fm_presets.append(fmfreq) + + i = i + 1 + + # DTMF-Setting + dtmf_enc_settings = RadioSettingGroup ("dtmf_enc_settings", + "DTMF Encoding Settings") + dtmf_dec_settings = RadioSettingGroup ("dtmf_dec_settings", + "DTMF Decoding Settings") + top.append(dtmf_enc_settings) + top.append(dtmf_dec_settings) + txdisable = RadioSetting("dtmf_settings.txdisable", + "TX-Disable", + RadioSettingValueBoolean( + _mem.dtmf_settings.txdisable)) + dtmf_enc_settings.append(txdisable) + + rxdisable = RadioSetting("dtmf_settings.rxdisable", + "RX-Disable", + RadioSettingValueBoolean( + _mem.dtmf_settings.rxdisable)) + dtmf_enc_settings.append(rxdisable) + + dtmfspeed_on = RadioSetting( + "dtmf_settings.dtmfspeed_on", + "DTMF Speed (On Time)", + RadioSettingValueList(LIST_DTMF_SPEED, + LIST_DTMF_SPEED[ + _mem.dtmf_settings.dtmfspeed_on])) + dtmf_enc_settings.append(dtmfspeed_on) + + dtmfspeed_off = RadioSetting( + "dtmf_settings.dtmfspeed_off", + "DTMF Speed (Off Time)", + RadioSettingValueList(LIST_DTMF_SPEED, + LIST_DTMF_SPEED[ + _mem.dtmf_settings.dtmfspeed_off])) + dtmf_enc_settings.append(dtmfspeed_off) + + def memory2string(dmtf_mem): + dtmf_string = "" + for digit in dmtf_mem: + if digit != 255: + index = LIST_DTMF_VALUES.index(digit) + dtmf_string = dtmf_string + LIST_DTMF_DIGITS[index] + return dtmf_string + + def apply_dmtf_frame(setting, obj): + LOG.debug("Setting DTMF-Code: " + str(setting.value) ) + val_string = str(setting.value) + for i in range(0,16): + obj[i] = 255 + i = 0 + for current_char in val_string: + current_char = current_char.upper() + index = LIST_DTMF_DIGITS.index(current_char) + obj[i] = LIST_DTMF_VALUES[ index ] + i = i + 1 + + codes = self._memobj.dtmf_codes + i = 1 + for dtmfcode in codes: + val = RadioSettingValueString(0, 16, + memory2string(dtmfcode.code), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_code_" + str(i) + "_code", + "DMTF Code " + str(i), val) + line.set_apply_callback(apply_dmtf_frame, dtmfcode.code) + dtmf_enc_settings.append(line) + i = i + 1 + + line = RadioSetting("dtmf_settings.mastervice", + "Master and Vice ID", + RadioSettingValueBoolean( + _mem.dtmf_settings.mastervice)) + dtmf_dec_settings.append(line) + + val = RadioSettingValueString(0, 16, + memory2string( + _mem.dtmf_settings.masterid), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_settings.masterid", + "Master Control ID ", val) + line.set_apply_callback(apply_dmtf_frame, + _mem.dtmf_settings.masterid) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.minspection", + "Master Inspection", + RadioSettingValueBoolean( + _mem.dtmf_settings.minspection)) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.mmonitor", + "Master Monitor", + RadioSettingValueBoolean( + _mem.dtmf_settings.mmonitor)) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.mstun", + "Master Stun", + RadioSettingValueBoolean( + _mem.dtmf_settings.mstun)) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.mkill", + "Master Kill", + RadioSettingValueBoolean( + _mem.dtmf_settings.mkill)) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.mrevive", + "Master Revive", + RadioSettingValueBoolean( + _mem.dtmf_settings.mrevive)) + dtmf_dec_settings.append(line) + + val = RadioSettingValueString(0, 16, + memory2string( + _mem.dtmf_settings.viceid), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_settings.viceid", + "Vice Control ID ", val) + line.set_apply_callback(apply_dmtf_frame, + _mem.dtmf_settings.viceid) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.vinspection", + "Vice Inspection", + RadioSettingValueBoolean( + _mem.dtmf_settings.vinspection)) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.vmonitor", + "Vice Monitor", + RadioSettingValueBoolean( + _mem.dtmf_settings.vmonitor)) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.vstun", + "Vice Stun", + RadioSettingValueBoolean( + _mem.dtmf_settings.vstun)) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.vkill", + "Vice Kill", + RadioSettingValueBoolean( + _mem.dtmf_settings.vkill)) + dtmf_dec_settings.append(line) + + line = RadioSetting("dtmf_settings.vrevive", + "Vice Revive", + RadioSettingValueBoolean( + _mem.dtmf_settings.vrevive)) + dtmf_dec_settings.append(line) + + val = RadioSettingValueString(0, 16, + memory2string( + _mem.dtmf_settings.inspection), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_settings.inspection", + "Inspection", val) + line.set_apply_callback(apply_dmtf_frame, + _mem.dtmf_settings.inspection) + dtmf_dec_settings.append(line) + + val = RadioSettingValueString(0, 16, + memory2string( + _mem.dtmf_settings.alarmcode), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_settings.alarmcode", + "Alarm", val) + line.set_apply_callback(apply_dmtf_frame, + _mem.dtmf_settings.alarmcode) + dtmf_dec_settings.append(line) + + val = RadioSettingValueString(0, 16, + memory2string( + _mem.dtmf_settings.kill), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_settings.kill", + "Kill", val) + line.set_apply_callback(apply_dmtf_frame, + _mem.dtmf_settings.kill) + dtmf_dec_settings.append(line) + + val = RadioSettingValueString(0, 16, + memory2string( + _mem.dtmf_settings.monitor), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_settings.monitor", + "Monitor", val) + line.set_apply_callback(apply_dmtf_frame, + _mem.dtmf_settings.monitor) + dtmf_dec_settings.append(line) + + val = RadioSettingValueString(0, 16, + memory2string( + _mem.dtmf_settings.stun), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_settings.stun", + "Stun", val) + line.set_apply_callback(apply_dmtf_frame, + _mem.dtmf_settings.stun) + dtmf_dec_settings.append(line) + + val = RadioSettingValueString(0, 16, + memory2string( + _mem.dtmf_settings.revive), + False, CHARSET_DTMF_DIGITS) + line = RadioSetting("dtmf_settings.revive", + "Revive", val) + line.set_apply_callback(apply_dmtf_frame, + _mem.dtmf_settings.revive) + dtmf_dec_settings.append(line) + + def apply_dmtf_listvalue(setting, obj): + LOG.debug("Setting value: "+ str(setting.value) + " from list") + val = str(setting.value) + index = LIST_DTMF_SPECIAL_DIGITS.index(val) + val = LIST_DTMF_SPECIAL_VALUES[index] + obj.set_value(val) + + idx = LIST_DTMF_SPECIAL_VALUES.index(_mem.dtmf_settings.groupcode) + line = RadioSetting( + "dtmf_settings.groupcode", + "Group Code", + RadioSettingValueList(LIST_DTMF_SPECIAL_DIGITS, + LIST_DTMF_SPECIAL_DIGITS[idx])) + line.set_apply_callback(apply_dmtf_listvalue, + _mem.dtmf_settings.groupcode) + dtmf_dec_settings.append(line) + + idx = LIST_DTMF_SPECIAL_VALUES.index(_mem.dtmf_settings.spacecode) + line = RadioSetting( + "dtmf_settings.spacecode", + "Space Code", + RadioSettingValueList(LIST_DTMF_SPECIAL_DIGITS, + LIST_DTMF_SPECIAL_DIGITS[idx])) + line.set_apply_callback(apply_dmtf_listvalue, + _mem.dtmf_settings.spacecode) + dtmf_dec_settings.append(line) + + if self.COLOR_LCD: + line = RadioSetting( + "dtmf_settings.resettime", + "Reset time", + RadioSettingValueList(LIST_5TONE_RESET_COLOR, + LIST_5TONE_RESET_COLOR[ + _mem.dtmf_settings.resettime])) + dtmf_dec_settings.append(line) + else: + line = RadioSetting( + "dtmf_settings.resettime", + "Reset time", + RadioSettingValueList(LIST_5TONE_RESET, + LIST_5TONE_RESET[ + _mem.dtmf_settings.resettime])) + dtmf_dec_settings.append(line) + + line = RadioSetting( + "dtmf_settings.delayproctime", + "Delay processing time", + RadioSettingValueList(LIST_DTMF_DELAY, + LIST_DTMF_DELAY[ + _mem.dtmf_settings.delayproctime])) + dtmf_dec_settings.append(line) + + + # 5 Tone Settings + stds_5tone = RadioSettingGroup ("stds_5tone", "Standards") + codes_5tone = RadioSettingGroup ("codes_5tone", "Codes") + + group_5tone = RadioSettingGroup ("group_5tone", "5 Tone Settings") + group_5tone.append(stds_5tone) + group_5tone.append(codes_5tone) + + top.append(group_5tone) + + def apply_list_value(setting, obj): + options = setting.value.get_options() + obj.set_value ( options.index(str(setting.value)) ) + + _5tone_standards = self._memobj._5tone_std_settings + i = 0 + for standard in _5tone_standards: + std_5tone = RadioSettingGroup ("std_5tone_" + str(i), + LIST_5TONE_STANDARDS[i]) + stds_5tone.append(std_5tone) + + period = standard.period + if period == 255: + LOG.debug("Period for " + LIST_5TONE_STANDARDS[i] + + " is not yet configured. Setting to 70ms.") + period = 5 + + if period <= len( LIST_5TONE_STANDARD_PERIODS ): + line = RadioSetting( + "_5tone_std_settings_" + str(i) + "_period", + "Period (ms)", RadioSettingValueList + (LIST_5TONE_STANDARD_PERIODS, + LIST_5TONE_STANDARD_PERIODS[period])) + line.set_apply_callback(apply_list_value, standard.period) + std_5tone.append(line) + else: + LOG.debug("Invalid value for 5tone period! Disabling.") + + group_tone = standard.group_tone + if group_tone == 255: + LOG.debug("Group-Tone for " + LIST_5TONE_STANDARDS[i] + + " is not yet configured. Setting to A.") + group_tone = 10 + + if group_tone <= len( LIST_5TONE_DIGITS ): + line = RadioSetting( + "_5tone_std_settings_" + str(i) + "_grouptone", + "Group Tone", + RadioSettingValueList(LIST_5TONE_DIGITS, + LIST_5TONE_DIGITS[ + group_tone])) + line.set_apply_callback(apply_list_value, + standard.group_tone) + std_5tone.append(line) + else: + LOG.debug("Invalid value for 5tone digit! Disabling.") + + repeat_tone = standard.repeat_tone + if repeat_tone == 255: + LOG.debug("Repeat-Tone for " + LIST_5TONE_STANDARDS[i] + + " is not yet configured. Setting to E.") + repeat_tone = 14 + + if repeat_tone <= len( LIST_5TONE_DIGITS ): + line = RadioSetting( + "_5tone_std_settings_" + str(i) + "_repttone", + "Repeat Tone", + RadioSettingValueList(LIST_5TONE_DIGITS, + LIST_5TONE_DIGITS[ + repeat_tone])) + line.set_apply_callback(apply_list_value, + standard.repeat_tone) + std_5tone.append(line) + else: + LOG.debug("Invalid value for 5tone digit! Disabling.") + i = i + 1 + + def my_apply_5tonestdlist_value(setting, obj): + if LIST_5TONE_STANDARDS.index(str(setting.value)) == 15: + obj.set_value(0xFF) + else: + obj.set_value( LIST_5TONE_STANDARDS. + index(str(setting.value)) ) + + def apply_5tone_frame(setting, obj): + LOG.debug("Setting 5 Tone: " + str(setting.value) ) + valstring = str(setting.value) + if len(valstring) == 0: + for i in range(0,5): + obj[i] = 255 + else: + validFrame = True + for i in range(0,5): + currentChar = valstring[i].upper() + if currentChar in LIST_5TONE_DIGITS: + obj[i] = LIST_5TONE_DIGITS.index(currentChar) + else: + validFrame = False + LOG.debug("invalid char: " + str(currentChar)) + if not validFrame: + LOG.debug("setting whole frame to FF" ) + for i in range(0,5): + obj[i] = 255 + + def validate_5tone_frame(value): + if (len(str(value)) != 5) and (len(str(value)) != 0) : + msg = ("5 Tone must have 5 digits or 0 digits") + raise InvalidValueError(msg) + for digit in str(value): + if digit.upper() not in LIST_5TONE_DIGITS: + msg = (str(digit) + " is not a valid digit for 5tones") + raise InvalidValueError(msg) + return value + + def frame2string(frame): + frameString = "" + for digit in frame: + if digit != 255: + frameString = frameString + LIST_5TONE_DIGITS[digit] + return frameString + + _5tone_codes = self._memobj._5tone_codes + i = 1 + for code in _5tone_codes: + code_5tone = RadioSettingGroup ("code_5tone_" + str(i), + "5 Tone code " + str(i)) + codes_5tone.append(code_5tone) + if (code.standard == 255 ): + currentVal = 15 + else: + currentVal = code.standard + line = RadioSetting("_5tone_code_" + str(i) + "_std", + " Standard", + RadioSettingValueList(LIST_5TONE_STANDARDS, + LIST_5TONE_STANDARDS[ + currentVal]) ) + line.set_apply_callback(my_apply_5tonestdlist_value, + code.standard) + code_5tone.append(line) + + val = RadioSettingValueString(0, 6, + frame2string(code.frame1), False) + line = RadioSetting("_5tone_code_" + str(i) + "_frame1", + " Frame 1", val) + val.set_validate_callback(validate_5tone_frame) + line.set_apply_callback(apply_5tone_frame, code.frame1) + code_5tone.append(line) + + val = RadioSettingValueString(0, 6, + frame2string(code.frame2), False) + line = RadioSetting("_5tone_code_" + str(i) + "_frame2", + " Frame 2", val) + val.set_validate_callback(validate_5tone_frame) + line.set_apply_callback(apply_5tone_frame, code.frame2) + code_5tone.append(line) + + val = RadioSettingValueString(0, 6, + frame2string(code.frame3), False) + line = RadioSetting("_5tone_code_" + str(i) + "_frame3", + " Frame 3", val) + val.set_validate_callback(validate_5tone_frame) + line.set_apply_callback(apply_5tone_frame, code.frame3) + code_5tone.append(line) + i = i + 1 + + _5_tone_decode1 = RadioSetting( + "_5tone_settings._5tone_decode_call_frame1", + "5 Tone decode call Frame 1", + RadioSettingValueBoolean( + _mem._5tone_settings._5tone_decode_call_frame1)) + group_5tone.append(_5_tone_decode1) + + _5_tone_decode2 = RadioSetting( + "_5tone_settings._5tone_decode_call_frame2", + "5 Tone decode call Frame 2", + RadioSettingValueBoolean( + _mem._5tone_settings._5tone_decode_call_frame2)) + group_5tone.append(_5_tone_decode2) + + _5_tone_decode3 = RadioSetting( + "_5tone_settings._5tone_decode_call_frame3", + "5 Tone decode call Frame 3", + RadioSettingValueBoolean( + _mem._5tone_settings._5tone_decode_call_frame3)) + group_5tone.append(_5_tone_decode3) + + _5_tone_decode_disp1 = RadioSetting( + "_5tone_settings._5tone_decode_disp_frame1", + "5 Tone decode disp Frame 1", + RadioSettingValueBoolean( + _mem._5tone_settings._5tone_decode_disp_frame1)) + group_5tone.append(_5_tone_decode_disp1) + + _5_tone_decode_disp2 = RadioSetting( + "_5tone_settings._5tone_decode_disp_frame2", + "5 Tone decode disp Frame 2", + RadioSettingValueBoolean( + _mem._5tone_settings._5tone_decode_disp_frame2)) + group_5tone.append(_5_tone_decode_disp2) + + _5_tone_decode_disp3 = RadioSetting( + "_5tone_settings._5tone_decode_disp_frame3", + "5 Tone decode disp Frame 3", + RadioSettingValueBoolean( + _mem._5tone_settings._5tone_decode_disp_frame3)) + group_5tone.append(_5_tone_decode_disp3) + + decode_standard = _mem._5tone_settings.decode_standard + if decode_standard == 255: + decode_standard = 0 + if decode_standard <= len (LIST_5TONE_STANDARDS_without_none) : + line = RadioSetting("_5tone_settings.decode_standard", + "5 Tone-decode Standard", + RadioSettingValueList( + LIST_5TONE_STANDARDS_without_none, + LIST_5TONE_STANDARDS_without_none[ + decode_standard])) + group_5tone.append(line) + else: + LOG.debug("Invalid decode std...") + + _5tone_delay1 = _mem._5tone_settings._5tone_delay1 + if _5tone_delay1 == 255: + _5tone_delay1 = 20 + + if _5tone_delay1 <= len( LIST_5TONE_DELAY ): + list = RadioSettingValueList(LIST_5TONE_DELAY, + LIST_5TONE_DELAY[ + _5tone_delay1]) + line = RadioSetting("_5tone_settings._5tone_delay1", + "5 Tone Delay Frame 1", list) + group_5tone.append(line) + else: + LOG.debug("Invalid value for 5tone delay (frame1) ! Disabling.") + + _5tone_delay2 = _mem._5tone_settings._5tone_delay2 + if _5tone_delay2 == 255: + _5tone_delay2 = 20 + LOG.debug("5 Tone delay unconfigured! Resetting to 200ms.") + + if _5tone_delay2 <= len( LIST_5TONE_DELAY ): + list = RadioSettingValueList(LIST_5TONE_DELAY, + LIST_5TONE_DELAY[ + _5tone_delay2]) + line = RadioSetting("_5tone_settings._5tone_delay2", + "5 Tone Delay Frame 2", list) + group_5tone.append(line) + else: + LOG.debug("Invalid value for 5tone delay (frame2)! Disabling.") + + _5tone_delay3 = _mem._5tone_settings._5tone_delay3 + if _5tone_delay3 == 255: + _5tone_delay3 = 20 + LOG.debug("5 Tone delay unconfigured! Resetting to 200ms.") + + if _5tone_delay3 <= len( LIST_5TONE_DELAY ): + list = RadioSettingValueList(LIST_5TONE_DELAY, + LIST_5TONE_DELAY[ + _5tone_delay3]) + line = RadioSetting("_5tone_settings._5tone_delay3", + "5 Tone Delay Frame 3", list ) + group_5tone.append(line) + else: + LOG.debug("Invalid value for 5tone delay (frame3)! Disabling.") + + ext_length = _mem._5tone_settings._5tone_first_digit_ext_length + if ext_length == 255: + ext_length = 0 + LOG.debug("1st Tone ext lenght unconfigured! Resetting to 0") + + if ext_length <= len( + LIST_5TONE_DELAY ): + list = RadioSettingValueList( + LIST_5TONE_DELAY, + LIST_5TONE_DELAY[ + ext_length]) + line = RadioSetting( + "_5tone_settings._5tone_first_digit_ext_length", + "First digit extend length", list) + group_5tone.append(line) + else: + LOG.debug("Invalid value for 5tone ext length! Disabling.") + + decode_reset_time = _mem._5tone_settings.decode_reset_time + if decode_reset_time == 255: + decode_reset_time = 59 + LOG.debug("Decode reset time unconfigured. resetting.") + if decode_reset_time <= len(LIST_5TONE_RESET): + list = RadioSettingValueList( + LIST_5TONE_RESET, + LIST_5TONE_RESET[ + decode_reset_time]) + line = RadioSetting("_5tone_settings.decode_reset_time", + "Decode reset time", list) + group_5tone.append(line) + else: + LOG.debug("Invalid value decode reset time! Disabling.") + + # 2 Tone + encode_2tone = RadioSettingGroup ("encode_2tone", "2 Tone Encode") + decode_2tone = RadioSettingGroup ("decode_2tone", "2 Code Decode") + + top.append(encode_2tone) + top.append(decode_2tone) + + duration_1st_tone = self._memobj._2tone.duration_1st_tone + if duration_1st_tone == 255: + LOG.debug("Duration of first 2 Tone digit is not yet " + + "configured. Setting to 600ms") + duration_1st_tone = 60 + + if duration_1st_tone <= len( LIST_5TONE_DELAY ): + line = RadioSetting("_2tone.duration_1st_tone", + "Duration 1st Tone", + RadioSettingValueList(LIST_5TONE_DELAY, + LIST_5TONE_DELAY[ + duration_1st_tone])) + encode_2tone.append(line) + + duration_2nd_tone = self._memobj._2tone.duration_2nd_tone + if duration_2nd_tone == 255: + LOG.debug("Duration of second 2 Tone digit is not yet " + + "configured. Setting to 600ms") + duration_2nd_tone = 60 + + if duration_2nd_tone <= len( LIST_5TONE_DELAY ): + line = RadioSetting("_2tone.duration_2nd_tone", + "Duration 2nd Tone", + RadioSettingValueList(LIST_5TONE_DELAY, + LIST_5TONE_DELAY[ + duration_2nd_tone])) + encode_2tone.append(line) + + duration_gap = self._memobj._2tone.duration_gap + if duration_gap == 255: + LOG.debug("Duration of gap is not yet " + + "configured. Setting to 300ms") + duration_gap = 30 + + if duration_gap <= len( LIST_5TONE_DELAY ): + line = RadioSetting("_2tone.duration_gap", "Duration of gap", + RadioSettingValueList(LIST_5TONE_DELAY, + LIST_5TONE_DELAY[ + duration_gap])) + encode_2tone.append(line) + + def _2tone_validate(value): + if value == 0: + return 65535 + if value == 65535: + return value + if not (300 <= value and value <= 3000): + msg = ("2 Tone Frequency: Must be between 300 and 3000 Hz") + raise InvalidValueError(msg) + return value + + def apply_2tone_freq(setting, obj): + val = int(setting.value) + if (val == 0) or (val == 65535): + obj.set_value(65535) + else: + obj.set_value(val) + + i = 1 + for code in self._memobj._2tone._2tone_encode: + code_2tone = RadioSettingGroup ("code_2tone_" + str(i), + "Encode Code " + str(i)) + encode_2tone.append(code_2tone) + + tmp = code.freq1 + if tmp == 65535: + tmp = 0 + val1 = RadioSettingValueInteger(0, 65535, tmp) + freq1 = RadioSetting("2tone_code_"+ str(i) + "_freq1", + "Frequency 1", val1) + val1.set_validate_callback(_2tone_validate) + freq1.set_apply_callback(apply_2tone_freq, code.freq1) + code_2tone.append(freq1) + + tmp = code.freq2 + if tmp == 65535: + tmp = 0 + val2 = RadioSettingValueInteger(0, 65535, tmp) + freq2 = RadioSetting("2tone_code_"+ str(i) + "_freq2", + "Frequency 2", val2) + val2.set_validate_callback(_2tone_validate) + freq2.set_apply_callback(apply_2tone_freq, code.freq2) + code_2tone.append(freq2) + + i = i + 1 + + decode_reset_time = _mem._2tone.reset_time + if decode_reset_time == 255: + decode_reset_time = 59 + LOG.debug("Decode reset time unconfigured. resetting.") + if decode_reset_time <= len(LIST_5TONE_RESET): + list = RadioSettingValueList( + LIST_5TONE_RESET, + LIST_5TONE_RESET[ + decode_reset_time]) + line = RadioSetting("_2tone.reset_time", + "Decode reset time", list) + decode_2tone.append(line) + else: + LOG.debug("Invalid value decode reset time! Disabling.") + + def apply_2tone_freq_pair(setting, obj): + val = int(setting.value) + derived_val = 65535 + frqname = str(setting._name[-5:]) + derivedname = "derived_from_" + frqname + + if (val == 0): + val = 65535 + derived_val = 65535 + else: + derived_val = int(round(2304000.0/val)) + + obj[frqname].set_value( val ) + obj[derivedname].set_value( derived_val ) + + LOG.debug("Apply " + frqname + ": " + str(val) + " | " + + derivedname + ": " + str(derived_val)) + + i = 1 + for decode_code in self._memobj._2tone._2tone_decode: + _2tone_dec_code = RadioSettingGroup ("code_2tone_" + str(i), + "Decode Code " + str(i)) + decode_2tone.append(_2tone_dec_code) + + j = 1 + for dec in decode_code.decs: + val = dec.dec + if val == 255: + LOG.debug("Dec for Code " + str(i) + " Dec " + str(j) + + " is not yet configured. Setting to 0.") + val = 0 + + if val <= len( LIST_2TONE_DEC ): + line = RadioSetting( + "_2tone_dec_settings_" + str(i) + "_dec_" + str(j), + "Dec " + str(j), RadioSettingValueList + (LIST_2TONE_DEC, + LIST_2TONE_DEC[val])) + line.set_apply_callback(apply_list_value, dec.dec) + _2tone_dec_code.append(line) + else: + LOG.debug("Invalid value for 2tone dec! Disabling.") + + val = dec.response + if val == 255: + LOG.debug("Response for Code " + str(i) + " Dec " + str(j)+ + " is not yet configured. Setting to 0.") + val = 0 + + if val <= len( LIST_2TONE_RESPONSE ): + line = RadioSetting( + "_2tone_dec_settings_" + str(i) + "_resp_" + str(j), + "Response " + str(j), RadioSettingValueList + (LIST_2TONE_RESPONSE, + LIST_2TONE_RESPONSE[val])) + line.set_apply_callback(apply_list_value, dec.response) + _2tone_dec_code.append(line) + else: + LOG.debug("Invalid value for 2tone response! Disabling.") + + val = dec.alert + if val == 255: + LOG.debug("Alert for Code " + str(i) + " Dec " + str(j) + + " is not yet configured. Setting to 0.") + val = 0 + + if val <= len( PTTIDCODE_LIST ): + line = RadioSetting( + "_2tone_dec_settings_" + str(i) + "_alert_" + str(j), + "Alert " + str(j), RadioSettingValueList + (PTTIDCODE_LIST, + PTTIDCODE_LIST[val])) + line.set_apply_callback(apply_list_value, dec.alert) + _2tone_dec_code.append(line) + else: + LOG.debug("Invalid value for 2tone alert! Disabling.") + j = j + 1 + + freq = self._memobj._2tone.freqs[i-1] + for char in ['A', 'B', 'C', 'D']: + setting_name = "freq" + str(char) + + tmp = freq[setting_name] + if tmp == 65535: + tmp = 0 + if tmp != 0: + expected = int(round(2304000.0/tmp)) + from_mem = freq["derived_from_" + setting_name] + if expected != from_mem: + LOG.error("Expected " + str(expected) + + " but read " + str(from_mem ) + + ". Disabling 2Tone Decode Freqs!") + break + val = RadioSettingValueInteger(0, 65535, tmp) + frq = RadioSetting("2tone_dec_"+ str(i) + "_freq" + str(char), + ("Decode Frequency " +str(char)), val) + val.set_validate_callback(_2tone_validate) + frq.set_apply_callback(apply_2tone_freq_pair, freq) + _2tone_dec_code.append(frq) + + i = i + 1 + + return top + + def set_settings(self, settings): + _settings = self._memobj.settings + for element in settings: + if not isinstance(element, RadioSetting): + if element.get_name() == "fm_preset": + self._set_fm_preset(element) + else: + self.set_settings(element) + continue + else: + try: + name = element.get_name() + if "." in name: + bits = name.split(".") + obj = self._memobj + for bit in bits[:-1]: + if "/" in bit: + bit, index = bit.split("/", 1) + index = int(index) + obj = getattr(obj, bit)[index] + else: + obj = getattr(obj, bit) + setting = bits[-1] + else: + obj = _settings + setting = element.get_name() + + if element.has_apply_callback(): + LOG.debug("Using apply callback") + element.run_apply_callback() + elif element.value.get_mutable(): + LOG.debug("Setting %s = %s" % (setting, element.value)) + setattr(obj, setting, element.value) + except Exception, e: + LOG.debug(element.get_name()) + raise + + @classmethod + def match_model(cls, filedata, filename): + match_size = False + match_model = False + + # testing the file data size + if len(filedata) == MEM_SIZE: + match_size = True + + # testing the firmware model fingerprint + match_model = model_match(cls, filedata) + + if match_size and match_model: + return True + else: + return False + + MEM_FORMAT = """ #seekto 0x0000; struct { @@ -127,9 +2831,8 @@

struct settings_vfo { u8 freq[8]; - u8 unknown1; - u8 offset[4]; - u8 unknown2[3]; + u8 offset[6]; + u8 unknown2[2]; ul16 rxtone; ul16 txtone; u8 scode; @@ -316,696 +3019,12 @@

"""

-# A note about the memmory in these radios -# -# The real memory of these radios extends to 0x4000 -# On read the factory software only uses up to 0x3200 -# On write it just uploads the contents up to 0x3100 -# -# The mem beyond 0x3200 holds the ID data - -MEM_SIZE = 0x4000 -BLOCK_SIZE = 0x40 -TX_BLOCK_SIZE = 0x10 -ACK_CMD = "\x06" -MODES = ["FM", "NFM"] -SKIP_VALUES = ["S", ""] -TONES = chirp_common.TONES -DTCS = sorted(chirp_common.DTCS_CODES + [645]) -NAME_LENGTH = 6 -PTTID_LIST = ["OFF", "BOT", "EOT", "BOTH"] -PTTIDCODE_LIST = ["%s" % x for x in range(1, 16)] -OPTSIG_LIST = ["OFF", "DTMF", "2TONE", "5TONE"] -SPMUTE_LIST = ["Tone/DTCS", "Tone/DTCS and Optsig", "Tone/DTCS or Optsig"] - -LIST_TOT = ["%s sec" % x for x in range(15, 615, 15)] -LIST_TOA = ["Off"] + ["%s seconds" % x for x in range(1, 11)] -LIST_APO = ["Off"] + ["%s minutes" % x for x in range(30, 330, 30)] -LIST_ABR = ["Off"] + ["%s seconds" % x for x in range(1, 51)] -LIST_DTMFST = ["OFF", "Keyboard", "ANI", "Keyboad + ANI"] -LIST_SCREV = ["TO (timeout)", "CO (carrier operated)", "SE (search)"] -LIST_EMCTP = ["TX alarm sound", "TX ANI", "Both"] -LIST_RINGT = ["Off"] + ["%s seconds" % x for x in range(1, 10)] -LIST_MDF = ["Frequency", "Channel", "Name"] -LIST_PONMSG = ["Full", "Message", "Battery voltage"] -LIST_COLOR = ["Off", "Blue", "Orange", "Purple"] -LIST_REPS = ["1000 Hz", "1450 Hz", "1750 Hz", "2100Hz"] -LIST_REPM = ["Off", "Carrier", "CTCSS or DCS", "Tone", "DTMF"] -LIST_RPTDL = ["Off"] + ["%s ms" % x for x in range(1, 10)] -LIST_ANIL = ["3", "4", "5"] -LIST_AB = ["A", "B"] -LIST_VFOMR = ["Frequency", "Channel"] -LIST_SHIFT = ["Off", "+", "-"] -LIST_TXP = ["High", "Low"] -LIST_WIDE = ["Wide", "Narrow"] -STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0] -LIST_STEP = [str(x) for x in STEPS] -LIST_5TONE_STANDARDS = ["CCIR1", "CCIR2", "PCCIR", "ZVEI1", "ZVEI2", "ZVEI3", - "PZVEI", "DZVEI", "PDZVEI", "EEA", "EIA", "EURO", - "CCITT", "NATEL", "MODAT", "none"] -LIST_5TONE_STANDARDS_without_none = ["CCIR1", "CCIR2", "PCCIR", "ZVEI1", - "ZVEI2", "ZVEI3", - "PZVEI", "DZVEI", "PDZVEI", "EEA", "EIA", - "EURO", "CCITT", "NATEL", "MODAT"] -LIST_5TONE_STANDARD_PERIODS = ["20", "30", "40", "50", "60", "70", "80", "90", - "100", "110", "120", "130", "140", "150", "160", - "170", "180", "190", "200"] -LIST_5TONE_DIGITS = ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "A", - "B", "C", "D", "E", "F"] -LIST_5TONE_DELAY = ["%s ms" % x for x in range(0, 1010, 10)] -LIST_5TONE_RESET = ["%s ms" % x for x in range(100, 8100, 100)] -LIST_DTMF_SPEED = ["%s ms" % x for x in range(50, 2010, 10)] -LIST_DTMF_DIGITS = ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "A", "B", - "C", "D", "#", "*"] -LIST_DTMF_VALUES = [0x0A, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, - 0x0D, 0x0E, 0x0F, 0x00, 0x0C, 0x0B ] -LIST_DTMF_SPECIAL_DIGITS = [ "*", "#", "A", "B", "C", "D"] -LIST_DTMF_SPECIAL_VALUES = [ 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x00] -LIST_DTMF_DELAY = ["%s ms" % x for x in range(100, 4100, 100)] -CHARSET_DTMF_DIGITS = "0123456789AaBbCcDd#*" -LIST_2TONE_DEC = ["A-B", "A-C", "A-D", - "B-A", "B-C", "B-D", - "C-A", "C-B", "C-D", - "D-A", "D-B", "D-C"] -LIST_2TONE_RESPONSE = ["None", "Alert", "Transpond", "Alert+Transpond"] - -# This is a general serial timeout for all serial read functions. -# Practice has show that about 0.7 sec will be enough to cover all radios. -STIMEOUT = 0.7 - -# this var controls the verbosity in the debug and by default it's low (False) -# make it True and you will to get a very verbose debug.log -debug = False - -# Power Levels -NORMAL_POWER_LEVELS = [chirp_common.PowerLevel("High", watts=25), - chirp_common.PowerLevel("Low", watts=10)] -UV5001_POWER_LEVELS = [chirp_common.PowerLevel("High", watts=50), - chirp_common.PowerLevel("Low", watts=10)] - -# this must be defined globaly -POWER_LEVELS = None - -# valid chars on the LCD, Note that " " (space) is stored as "\xFF" -VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \ - "`{|}!"#$%&'()*+,-./:;<=>?@[]^_" - - -##### ID strings ##################################################### - -# BTECH UV2501 pre-production units -UV2501pp_fp = "M2C294" -# BTECH UV2501 pre-production units 2 + and 1st Gen radios -UV2501pp2_fp = "M29204" -# B-TECH UV-2501 second generation (2G) radios -UV2501G2_fp = "BTG214" -# B-TECH UV-2501 third generation (3G) radios -UV2501G3_fp = "BTG324" - -# B-TECH UV-2501+220 pre-production units -UV2501_220pp_fp = "M3C281" -# extra block read for the 2501+220 pre-production units -# the same for all of this radios so far -UV2501_220pp_id = " 280528" -# B-TECH UV-2501+220 -UV2501_220_fp = "M3G201" -# new variant, let's call it Generation 2 -UV2501_220G2_fp = "BTG211" -# B-TECH UV-2501+220 third generation (3G) -UV2501_220G3_fp = "BTG311" - -# B-TECH UV-5001 pre-production units + 1st Gen radios -UV5001pp_fp = "V19204" -# B-TECH UV-5001 alpha units -UV5001alpha_fp = "V28204" -# B-TECH UV-5001 second generation (2G) radios -UV5001G2_fp = "BTG214" -# B-TECH UV-5001 second generation (2G2) -UV5001G22_fp = "V2G204" -# B-TECH UV-5001 third generation (3G) -UV5001G3_fp = "BTG304" - -# special var to know when we found a BTECH Gen 3 -BTECH3 = [UV2501G3_fp, UV2501_220G3_fp, UV5001G3_fp] - - -# WACCOM Mini-8900 -MINI8900_fp = "M28854" - - -# QYT KT-UV980 -KTUV980_fp = "H28854" - -# QYT KT8900 -KT8900_fp = "M29154" -# New generations KT8900 -KT8900_fp1 = "M2C234" -KT8900_fp2 = "M2G1F4" -KT8900_fp3 = "M2G2F4" -KT8900_fp4 = "M2G304" -KT8900_fp5 = "M2G314" -# this radio has an extra ID -KT8900_id = " 303688" - -# KT8900R -KT8900R_fp = "M3G1F4" -# Second Generation -KT8900R_fp1 = "M3G214" -# another model -KT8900R_fp2 = "M3C234" -# another model G4? -KT8900R_fp3 = "M39164" -# another model -KT8900R_fp4 = "M3G314" -# this radio has an extra ID -KT8900R_id = "280528" - - -# LUITON LT-588UV -LT588UV_fp = "V2G1F4" -# Added by rstrickoff gen 2 id -LT588UV_fp1 = "V2G214" - - -#### MAGICS -# for the Waccom Mini-8900 -MSTRING_MINI8900 = "\x55\xA5\xB5\x45\x55\x45\x4d\x02" -# for the B-TECH UV-2501+220 (including pre production ones) -MSTRING_220 = "\x55\x20\x15\x12\x12\x01\x4d\x02" -# for the QYT KT8900 & R -MSTRING_KT8900 = "\x55\x20\x15\x09\x16\x45\x4D\x02" -MSTRING_KT8900R = "\x55\x20\x15\x09\x25\x01\x4D\x02" -# magic string for all other models -MSTRING = "\x55\x20\x15\x09\x20\x45\x4d\x02" - - -def _clean_buffer(radio): - """Cleaning the read serial buffer, hard timeout to survive an infinite - data stream""" - - # touching the serial timeout to optimize the flushing - # restored at the end to the default value - radio.pipe.timeout = 0.1 - dump = "1" - datacount = 0 - - try: - while len(dump) > 0: - dump = radio.pipe.read(100) - datacount += len(dump) - # hard limit to survive a infinite serial data stream - # 5 times bigger than a normal rx block (69 bytes) - if datacount > 345: - seriale = "Please check your serial port selection." - raise errors.RadioError(seriale) - - # restore the default serial timeout - radio.pipe.timeout = STIMEOUT - - except Exception: - raise errors.RadioError("Unknown error cleaning the serial buffer") - - -def _rawrecv(radio, amount): - """Raw read from the radio device, less intensive way""" - - data = "" - - try: - data = radio.pipe.read(amount) - - # DEBUG - if debug is True: - LOG.debug("<== (%d) bytes:\n\n%s" % - (len(data), util.hexprint(data))) - - # fail if no data is received - if len(data) == 0: - raise errors.RadioError("No data received from radio") - - # notice on the logs if short - if len(data) < amount: - LOG.warn("Short reading %d bytes from the %d requested." % - (len(data), amount)) - - except: - raise errors.RadioError("Error reading data from radio") - - return data - - -def _send(radio, data): - """Send data to the radio device""" - - try: - for byte in data: - radio.pipe.write(byte) - # Some OS (mainly Linux ones) are too fast on the serial and - # get the MCU inside the radio stuck in the early stages, this - # hits some models more than others. - # - # To cope with that we introduce a delay on the writes. - # Many option have been tested (delaying only after error occures, after short reads, only for linux, ...) - # Finally, a static delay was chosen as simplest of all solutions (Michael Wagner, OE4AMW) - # (for details, see issue 3993) - sleep(0.002) - - # DEBUG - if debug is True: - LOG.debug("==> (%d) bytes:\n\n%s" % - (len(data), util.hexprint(data))) - except: - raise errors.RadioError("Error sending data to radio") - - -def _make_frame(cmd, addr, length, data=""): - """Pack the info in the headder format""" - frame = "\x06" + struct.pack(">BHB", ord(cmd), addr, length) - # add the data if set - if len(data) != 0: - frame += data - - return frame - - -def _recv(radio, addr): - """Get data from the radio all at once to lower syscalls load""" - - # Get the full 69 bytes at a time to reduce load - # 1 byte ACK + 4 bytes header + 64 bytes of data (BLOCK_SIZE) - - # get the whole block - block = _rawrecv(radio, BLOCK_SIZE + 5) - - # basic check - if len(block) < (BLOCK_SIZE + 5): - raise errors.RadioError("Short read of the block 0x%04x" % addr) - - # checking for the ack - if block[0] != ACK_CMD: - raise errors.RadioError("Bad ack from radio in block 0x%04x" % addr) - - # header validation - c, a, l = struct.unpack(">BHB", block[1:5]) - if a != addr or l != BLOCK_SIZE or c != ord("X"): - LOG.debug("Invalid header for block 0x%04x" % addr) - LOG.debug("CMD: %s ADDR: %04x SIZE: %02x" % (c, a, l)) - raise errors.RadioError("Invalid header for block 0x%04x:" % addr) - - # return the data - return block[5:] - - -def _start_clone_mode(radio, status): - """Put the radio in clone mode and get the ident string, 3 tries""" - - # cleaning the serial buffer - _clean_buffer(radio) - - # prep the data to show in the UI - status.cur = 0 - status.msg = "Identifying the radio..." - status.max = 3 - radio.status_fn(status) - - try: - for a in range(0, status.max): - # Update the UI - status.cur = a + 1 - radio.status_fn(status) - - # send the magic word - _send(radio, radio._magic) - - # Now you get a x06 of ACK if all goes well - ack = radio.pipe.read(1) - - if ack == "\x06": - # DEBUG - LOG.info("Magic ACK received") - status.cur = status.max - radio.status_fn(status) - - return True - - return False - - except errors.RadioError: - raise - except Exception, e: - raise errors.RadioError("Error sending Magic to radio:\n%s" % e) - - -def _do_ident(radio, status, upload=False): - """Put the radio in PROGRAM mode & identify it""" - # set the serial discipline - radio.pipe.baudrate = 9600 - radio.pipe.parity = "N" - - # open the radio into program mode - if _start_clone_mode(radio, status) is False: - msg = "Radio did not enter clone mode" - # warning about old versions of QYT KT8900 - if radio.MODEL == "KT8900": - msg += ". You may want to try it as a WACCOM MINI-8900, there is a" - msg += " known variant of this radios that is a clone of it." - raise errors.RadioError(msg) - - # Ok, get the ident string - ident = _rawrecv(radio, 49) - - # basic check for the ident - if len(ident) != 49: - raise errors.RadioError("Radio send a short ident block.") - - # check if ident is OK - itis = False - for fp in radio._fileid: - if fp in ident: - # got it! - itis = True - # checking if we are dealing with a Gen 3 BTECH - if radio.VENDOR == "BTECH" and fp in BTECH3: - radio.btech3 = True - - break - - if itis is False: - LOG.debug("Incorrect model ID, got this:\n\n" + util.hexprint(ident)) - raise errors.RadioError("Radio identification failed.") - - # some radios needs a extra read and check for a code on it, this ones - # has the check value in the _id2 var, others simply False - if radio._id2 is not False: - # lower the timeout here as this radios are reseting due to timeout - radio.pipe.timeout = 0.05 - - # query & receive the extra ID - _send(radio, _make_frame("S", 0x3DF0, 16)) - id2 = _rawrecv(radio, 21) - - # WARNING !!!!!! - # different radios send a response with a different amount of data - # it seems that it's padded with \xff, \x20 and some times with \x00 - # we just care about the first 16, our magic string is in there - if len(id2) < 16: - raise errors.RadioError("The extra ID is short, aborting.") - - # ok, the correct string must be in the received data - if radio._id2 not in id2: - LOG.debug("Full *BAD* extra ID on the %s is: \n%s" % - (radio.MODEL, util.hexprint(id2))) - raise errors.RadioError("The extra ID is wrong, aborting.") - - # this radios need a extra request/answer here on the upload - # the amount of data received depends of the radio type - # - # also the first block of TX must no have the ACK at the beginning - # see _upload for this. - if upload is True: - # send an ACK - _send(radio, ACK_CMD) - - # the amount of data depend on the radio, so far we have two radios - # reading two bytes with an ACK at the end and just ONE with just - # one byte (QYT KT8900) - # the JT-6188 appears a clone of the last, but reads TWO bytes. - # - # we will read two bytes with a custom timeout to not penalize the - # users for this. - # - # we just check for a response and last byte being a ACK, that is - # the common stone for all radios (3 so far) - ack = _rawrecv(radio, 2) - - # checking - if len(ack) == 0 or ack[-1:] != ACK_CMD: - raise errors.RadioError("Radio didn't ACK the upload") - - # restore the default serial timeout - radio.pipe.timeout = STIMEOUT - - # DEBUG - LOG.info("Positive ident, this is a %s %s" % (radio.VENDOR, radio.MODEL)) - - return True - - -def _download(radio): - """Get the memory map""" - - # UI progress - status = chirp_common.Status() - - # put radio in program mode and identify it - _do_ident(radio, status) - - # the models that doesn't have the extra ID have to make a dummy read here - if radio._id2 is False: - _send(radio, _make_frame("S", 0, BLOCK_SIZE)) - discard = _rawrecv(radio, BLOCK_SIZE + 5) - - if debug is True: - LOG.info("Dummy first block read done, got this:\n\n %s", - util.hexprint(discard)) - - # reset the progress bar in the UI - status.max = MEM_SIZE / BLOCK_SIZE - status.msg = "Cloning from radio..." - status.cur = 0 - radio.status_fn(status) - - # cleaning the serial buffer - _clean_buffer(radio) - - data = "" - for addr in range(0, MEM_SIZE, BLOCK_SIZE): - # sending the read request - _send(radio, _make_frame("S", addr, BLOCK_SIZE)) - - # read - d = _recv(radio, addr) - - # aggregate the data - data += d - - # UI Update - status.cur = addr / BLOCK_SIZE - status.msg = "Cloning from radio..." - radio.status_fn(status) - - return data - - -def _upload(radio): - """Upload procedure""" - - # The UPLOAD mem is restricted to lower than 0x3100, - # so we will overide that here localy - MEM_SIZE = 0x3100 - - # UI progress - status = chirp_common.Status() - - # put radio in program mode and identify it - _do_ident(radio, status, True) - - # get the data to upload to radio - data = radio.get_mmap() - - # Reset the UI progress - status.max = MEM_SIZE / TX_BLOCK_SIZE - status.cur = 0 - status.msg = "Cloning to radio..." - radio.status_fn(status) - - # the radios that doesn't have the extra ID 'may' do a dummy write, I found - # that leveraging the bad ACK and NOT doing the dummy write is ok, as the - # dummy write is accepted (it actually writes to the mem!) by the radio. - - # cleaning the serial buffer - _clean_buffer(radio) - - # the fun start here - for addr in range(0, MEM_SIZE, TX_BLOCK_SIZE): - # getting the block of data to send - d = data[addr:addr + TX_BLOCK_SIZE] - - # build the frame to send - frame = _make_frame("X", addr, TX_BLOCK_SIZE, d) - - # first block must not send the ACK at the beginning for the - # ones that has the extra id, since this have to do a extra step - if addr == 0 and radio._id2 is not False: - frame = frame[1:] - - # send the frame - _send(radio, frame) - - # receiving the response - ack = _rawrecv(radio, 1) - - # basic check - if len(ack) != 1: - raise errors.RadioError("No ACK when writing block 0x%04x" % addr) - - if not ack in "\x06\x05": - raise errors.RadioError("Bad ACK writing block 0x%04x:" % addr) - - # UI Update - status.cur = addr / TX_BLOCK_SIZE - status.msg = "Cloning to radio..." - radio.status_fn(status) - - -def model_match(cls, data): - """Match the opened/downloaded image to the correct version""" - rid = data[0x3f70:0x3f76] - - if rid in cls._fileid: - return True - - return False - - -def _decode_ranges(low, high): - """Unpack the data in the ranges zones in the memmap and return - a tuple with the integer corresponding to the Mhz it means""" - ilow = int(low[0]) * 100 + int(low[1]) * 10 + int(low[2]) - ihigh = int(high[0]) * 100 + int(high[1]) * 10 + int(high[2]) - ilow *= 1000000 - ihigh *= 1000000 - - return (ilow, ihigh) - - -def _split(rf, f1, f2): - """Returns False if the two freqs are in the same band (no split) - or True otherwise""" - - # determine if the two freqs are in the same band - for low, high in rf.valid_bands: - if f1 >= low and f1 <= high and \ - f2 >= low and f2 <= high: - # if the two freqs are on the same Band this is not a split - return False - - # if you get here is because the freq pairs are split - return False - - -class BTech(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio): + +class BTech(BTechMobileCommon): """BTECH's UV-5001 and alike radios""" - VENDOR = "BTECH" - MODEL = "" - IDENT = "" - _vhf_range = (130000000, 180000000) - _220_range = (210000000, 231000000) - _uhf_range = (400000000, 521000000) - _upper = 199 - _magic = MSTRING - _fileid = None - _id2 = False - btech3 = False - - @classmethod - def get_prompts(cls): - rp = chirp_common.RadioPrompts() - rp.experimental = \ - ('This driver is experimental.\n' - '\n' - 'Please keep a copy of your memories with the original software ' - 'if you treasure them, this driver is new and may contain' - ' bugs.\n' - '\n' - ) - rp.pre_download = _(dedent("""\ - Follow these instructions to download your info: - - 1 - Turn off your radio - 2 - Connect your interface cable - 3 - Turn on your radio - 4 - Do the download of your radio data - - """)) - rp.pre_upload = _(dedent("""\ - Follow these instructions to upload your info: - - 1 - Turn off your radio - 2 - Connect your interface cable - 3 - Turn on your radio - 4 - Do the upload of your radio data - - """)) - return rp - - def get_features(self): - """Get the radio's features""" - - # we will use the following var as global - global POWER_LEVELS - - rf = chirp_common.RadioFeatures() - rf.has_settings = True - rf.has_bank = False - rf.has_tuning_step = False - rf.can_odd_split = True - rf.has_name = True - rf.has_offset = True - rf.has_mode = True - rf.has_dtcs = True - rf.has_rx_dtcs = True - rf.has_dtcs_polarity = True - rf.has_ctone = True - rf.has_cross = True - rf.valid_modes = MODES - rf.valid_characters = VALID_CHARS - rf.valid_name_length = NAME_LENGTH - rf.valid_duplexes = ["", "-", "+", "split", "off"] - rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross'] - rf.valid_cross_modes = [ - "Tone->Tone", - "DTCS->", - "->DTCS", - "Tone->DTCS", - "DTCS->Tone", - "->Tone", - "DTCS->DTCS"] - rf.valid_skips = SKIP_VALUES - rf.valid_dtcs_codes = DTCS - rf.memory_bounds = (0, self._upper) - - # power levels - if self.MODEL == "UV-5001": - POWER_LEVELS = UV5001_POWER_LEVELS # Higher power (50W) - else: - POWER_LEVELS = NORMAL_POWER_LEVELS # Lower power (25W) - - rf.valid_power_levels = POWER_LEVELS - - # bands - rf.valid_bands = [self._vhf_range, self._uhf_range] - - # 2501+220 & KT8900R - if self.MODEL in ["UV-2501+220", "KT8900R"]: - rf.valid_bands.append(self._220_range) - - return rf - - def sync_in(self): - """Download from radio""" - data = _download(self) - self._mmap = memmap.MemoryMap(data) - self.process_mmap() - - def sync_out(self): - """Upload to radio""" - try: - _upload(self) - except errors.RadioError: - raise - except Exception, e: - raise errors.RadioError("Error: %s" % e) + BANDS = 2 + COLOR_LCD = False + NAME_LENGTH = 6

def set_options(self): """This is to read the options from the image and set it in the @@ -1048,1546 +3067,6 @@ # load specific parameters from the radio image self.set_options()

- def get_raw_memory(self, number): - return repr(self._memobj.memory[number]) - - def _decode_tone(self, val): - """Parse the tone data to decode from mem, it returns: - Mode (''|DTCS|Tone), Value (None|###), Polarity (None,N,R)""" - pol = None - - if val in [0, 65535]: - return '', None, None - elif val > 0x0258: - a = val / 10.0 - return 'Tone', a, pol - else: - if val > 0x69: - index = val - 0x6A - pol = "R" - else: - index = val - 1 - pol = "N" - - tone = DTCS[index] - return 'DTCS', tone, pol - - def _encode_tone(self, memval, mode, val, pol): - """Parse the tone data to encode from UI to mem""" - if mode == '' or mode is None: - memval.set_raw("\x00\x00") - elif mode == 'Tone': - memval.set_value(val * 10) - elif mode == 'DTCS': - # detect the index in the DTCS list - try: - index = DTCS.index(val) - if pol == "N": - index += 1 - else: - index += 0x6A - memval.set_value(index) - except: - msg = "Digital Tone '%d' is not supported" % value - LOG.error(msg) - raise errors.RadioError(msg) - else: - msg = "Internal error: invalid mode '%s'" % mode - LOG.error(msg) - raise errors.InvalidDataError(msg) - - def get_memory(self, number): - """Get the mem representation from the radio image""" - _mem = self._memobj.memory[number] - _names = self._memobj.names[number] - - # Create a high-level memory object to return to the UI - mem = chirp_common.Memory() - - # Memory number - mem.number = number - - if _mem.get_raw()[0] == "\xFF": - mem.empty = True - return mem - - # Freq and offset - mem.freq = int(_mem.rxfreq) * 10 - # tx freq can be blank - if _mem.get_raw()[4] == "\xFF": - # TX freq not set - mem.offset = 0 - mem.duplex = "off" - else: - # TX freq set - offset = (int(_mem.txfreq) * 10) - mem.freq - if offset != 0: - if _split(self.get_features(), mem.freq, int(_mem.txfreq) * 10): - mem.duplex = "split" - mem.offset = int(_mem.txfreq) * 10 - elif offset < 0: - mem.offset = abs(offset) - mem.duplex = "-" - elif offset > 0: - mem.offset = offset - mem.duplex = "+" - else: - mem.offset = 0 - - # name TAG of the channel - mem.name = str(_names.name).rstrip("\xFF").replace("\xFF", " ") - - # power - mem.power = POWER_LEVELS[int(_mem.power)] - - # wide/narrow - mem.mode = MODES[int(_mem.wide)] - - # skip - mem.skip = SKIP_VALUES[_mem.add] - - # tone data - rxtone = txtone = None - txtone = self._decode_tone(_mem.txtone) - rxtone = self._decode_tone(_mem.rxtone) - chirp_common.split_tone_decode(mem, txtone, rxtone) - - # Extra - mem.extra = RadioSettingGroup("extra", "Extra") - - scramble = RadioSetting("scramble", "Scramble", - RadioSettingValueBoolean(bool(_mem.scramble))) - mem.extra.append(scramble) - - bcl = RadioSetting("bcl", "Busy channel lockout", - RadioSettingValueBoolean(bool(_mem.bcl))) - mem.extra.append(bcl) - - pttid = RadioSetting("pttid", "PTT ID", - RadioSettingValueList(PTTID_LIST, - PTTID_LIST[_mem.pttid])) - mem.extra.append(pttid) - - # validating scode - scode = _mem.scode if _mem.scode != 15 else 0 - pttidcode = RadioSetting("scode", "PTT ID signal code", - RadioSettingValueList( - PTTIDCODE_LIST, - PTTIDCODE_LIST[scode])) - mem.extra.append(pttidcode) - - optsig = RadioSetting("optsig", "Optional signaling", - RadioSettingValueList( - OPTSIG_LIST, - OPTSIG_LIST[_mem.optsig])) - mem.extra.append(optsig) - - spmute = RadioSetting("spmute", "Speaker mute", - RadioSettingValueList( - SPMUTE_LIST, - SPMUTE_LIST[_mem.spmute])) - mem.extra.append(spmute) - - return mem - - def set_memory(self, mem): - """Set the memory data in the eeprom img from the UI""" - # get the eprom representation of this channel - _mem = self._memobj.memory[mem.number] - _names = self._memobj.names[mem.number] - - mem_was_empty = False - # same method as used in get_memory for determining if mem is empty - # doing this BEFORE overwriting it with new values ... - if _mem.get_raw()[0] == "\xFF": - LOG.debug("This mem was empty before") - mem_was_empty = True - - # if empty memmory - if mem.empty: - # the channel itself - _mem.set_raw("\xFF" * 16) - # the name tag - _names.set_raw("\xFF" * 16) - return - - # frequency - _mem.rxfreq = mem.freq / 10 - - # duplex - if mem.duplex == "+": - _mem.txfreq = (mem.freq + mem.offset) / 10 - elif mem.duplex == "-": - _mem.txfreq = (mem.freq - mem.offset) / 10 - elif mem.duplex == "off": - for i in _mem.txfreq: - i.set_raw("\xFF") - elif mem.duplex == "split": - _mem.txfreq = mem.offset / 10 - else: - _mem.txfreq = mem.freq / 10 - - # tone data - ((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \ - chirp_common.split_tone_encode(mem) - self._encode_tone(_mem.txtone, txmode, txtone, txpol) - self._encode_tone(_mem.rxtone, rxmode, rxtone, rxpol) - - # name TAG of the channel - if len(mem.name) < NAME_LENGTH: - # we must pad to NAME_LENGTH chars, " " = "\xFF" - mem.name = str(mem.name).ljust(NAME_LENGTH, " ") - _names.name = str(mem.name).replace(" ", "\xFF") - - # power, # default power level is high - _mem.power = 0 if mem.power is None else POWER_LEVELS.index(mem.power) - - # wide/narrow - _mem.wide = MODES.index(mem.mode) - - # scan add property - _mem.add = SKIP_VALUES.index(mem.skip) - - # reseting unknowns, this have to be set by hand - _mem.unknown0 = 0 - _mem.unknown1 = 0 - _mem.unknown2 = 0 - _mem.unknown3 = 0 - _mem.unknown4 = 0 - _mem.unknown5 = 0 - _mem.unknown6 = 0 - - # extra settings - if len(mem.extra) > 0: - # there are setting, parse - LOG.debug("Extra-Setting supplied. Setting them.") - for setting in mem.extra: - setattr(_mem, setting.get_name(), setting.value) - else: - if mem.empty: - LOG.debug("New mem is empty.") - else: - LOG.debug("New mem is NOT empty") - # set extra-settings to default ONLY when apreviously empty or - # deleted memory was edited to prevent errors such as #4121 - if mem_was_empty : - LOG.debug("old mem was empty. Setting default for extras.") - _mem.spmute = 0 - _mem.optsig = 0 - _mem.scramble = 0 - _mem.bcl = 0 - _mem.pttid = 0 - _mem.scode = 0 - - return mem - - def get_settings(self): - """Translate the bit in the mem_struct into settings in the UI""" - _mem = self._memobj - basic = RadioSettingGroup("basic", "Basic Settings") - advanced = RadioSettingGroup("advanced", "Advanced Settings") - other = RadioSettingGroup("other", "Other Settings") - work = RadioSettingGroup("work", "Work Mode Settings") - fm_presets = RadioSettingGroup("fm_presets", "FM Presets") - top = RadioSettings(basic, advanced, other, work, fm_presets) - - # Basic - tdr = RadioSetting("settings.tdr", "Transceiver dual receive", - RadioSettingValueBoolean(_mem.settings.tdr)) - basic.append(tdr) - - sql = RadioSetting("settings.sql", "Squelch level", - RadioSettingValueInteger(0, 9, _mem.settings.sql)) - basic.append(sql) - - tot = RadioSetting("settings.tot", "Time out timer", - RadioSettingValueList(LIST_TOT, LIST_TOT[ - _mem.settings.tot])) - basic.append(tot) - - if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"): - apo = RadioSetting("settings.apo", "Auto power off timer", - RadioSettingValueList(LIST_APO, LIST_APO[ - _mem.settings.apo])) - basic.append(apo) - else: - toa = RadioSetting("settings.apo", "Time out alert timer", - RadioSettingValueList(LIST_TOA, LIST_TOA[ - _mem.settings.apo])) - basic.append(toa) - - abr = RadioSetting("settings.abr", "Backlight timer", - RadioSettingValueList(LIST_ABR, LIST_ABR[ - _mem.settings.abr])) - basic.append(abr) - - beep = RadioSetting("settings.beep", "Key beep", - RadioSettingValueBoolean(_mem.settings.beep)) - basic.append(beep) - - dtmfst = RadioSetting("settings.dtmfst", "DTMF side tone", - RadioSettingValueList(LIST_DTMFST, LIST_DTMFST[ - _mem.settings.dtmfst])) - basic.append(dtmfst) - - prisc = RadioSetting("settings.prisc", "Priority scan", - RadioSettingValueBoolean(_mem.settings.prisc)) - basic.append(prisc) - - prich = RadioSetting("settings.prich", "Priority channel", - RadioSettingValueInteger(0, 199, - _mem.settings.prich)) - basic.append(prich) - - screv = RadioSetting("settings.screv", "Scan resume method", - RadioSettingValueList(LIST_SCREV, LIST_SCREV[ - _mem.settings.screv])) - basic.append(screv) - - pttlt = RadioSetting("settings.pttlt", "PTT transmit delay", - RadioSettingValueInteger(0, 30, - _mem.settings.pttlt)) - basic.append(pttlt) - - emctp = RadioSetting("settings.emctp", "Alarm mode", - RadioSettingValueList(LIST_EMCTP, LIST_EMCTP[ - _mem.settings.emctp])) - basic.append(emctp) - - emcch = RadioSetting("settings.emcch", "Alarm channel", - RadioSettingValueInteger(0, 199, - _mem.settings.emcch)) - basic.append(emcch) - - ringt = RadioSetting("settings.ringt", "Ring time", - RadioSettingValueList(LIST_RINGT, LIST_RINGT[ - _mem.settings.ringt])) - basic.append(ringt) - - camdf = RadioSetting("settings.camdf", "Display mode A", - RadioSettingValueList(LIST_MDF, LIST_MDF[ - _mem.settings.camdf])) - basic.append(camdf) - - cbmdf = RadioSetting("settings.cbmdf", "Display mode B", - RadioSettingValueList(LIST_MDF, LIST_MDF[ - _mem.settings.cbmdf])) - basic.append(cbmdf) - - if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"): - sync = RadioSetting("settings.sync", "A/B channel sync", - RadioSettingValueBoolean(_mem.settings.sync)) - basic.append(sync) - else: - autolk = RadioSetting("settings.sync", "Auto keylock", - RadioSettingValueBoolean(_mem.settings.sync)) - basic.append(autolk) - - ponmsg = RadioSetting("settings.ponmsg", "Power-on message", - RadioSettingValueList(LIST_PONMSG, LIST_PONMSG[ - _mem.settings.ponmsg])) - basic.append(ponmsg) - - wtled = RadioSetting("settings.wtled", "Standby backlight Color", - RadioSettingValueList(LIST_COLOR, LIST_COLOR[ - _mem.settings.wtled])) - basic.append(wtled) - - rxled = RadioSetting("settings.rxled", "RX backlight Color", - RadioSettingValueList(LIST_COLOR, LIST_COLOR[ - _mem.settings.rxled])) - basic.append(rxled) - - txled = RadioSetting("settings.txled", "TX backlight Color", - RadioSettingValueList(LIST_COLOR, LIST_COLOR[ - _mem.settings.txled])) - basic.append(txled) - - anil = RadioSetting("settings.anil", "ANI length", - RadioSettingValueList(LIST_ANIL, LIST_ANIL[ - _mem.settings.anil])) - basic.append(anil) - - reps = RadioSetting("settings.reps", "Relay signal (tone burst)", - RadioSettingValueList(LIST_REPS, LIST_REPS[ - _mem.settings.reps])) - basic.append(reps) - - repm = RadioSetting("settings.repm", "Relay condition", - RadioSettingValueList(LIST_REPM, LIST_REPM[ - _mem.settings.repm])) - basic.append(repm) - - if self.MODEL in ("UV-2501", "UV-2501+220", "UV-5001"): - tdrab = RadioSetting("settings.tdrab", "TDR return time", - RadioSettingValueList(LIST_ABR, LIST_ABR[ - _mem.settings.tdrab])) - basic.append(tdrab) - - ste = RadioSetting("settings.ste", "Squelch tail eliminate", - RadioSettingValueBoolean(_mem.settings.ste)) - basic.append(ste) - - rpste = RadioSetting("settings.rpste", "Repeater STE", - RadioSettingValueList(LIST_RINGT, LIST_RINGT[ - _mem.settings.rpste])) - basic.append(rpste) - - rptdl = RadioSetting("settings.rptdl", "Repeater STE delay", - RadioSettingValueList(LIST_RPTDL, LIST_RPTDL[ - _mem.settings.rptdl])) - basic.append(rptdl) - - if str(_mem.fingerprint.fp) in BTECH3: - - mgain = RadioSetting("settings.mgain", "Mic gain", - RadioSettingValueInteger(0, 120, - _mem.settings.mgain)) - basic.append(mgain) - - dtmfg = RadioSetting("settings.dtmfg", "DTMF gain", - RadioSettingValueInteger(0, 60, - _mem.settings.dtmfg)) - basic.append(dtmfg) - - # Advanced - def _filter(name): - filtered = "" - for char in str(name): - if char in VALID_CHARS: - filtered += char - else: - filtered += " " - return filtered - - _msg = self._memobj.poweron_msg - line1 = RadioSetting("poweron_msg.line1", "Power-on message line 1", - RadioSettingValueString(0, 6, _filter( - _msg.line1))) - advanced.append(line1) - line2 = RadioSetting("poweron_msg.line2", "Power-on message line 2", - RadioSettingValueString(0, 6, _filter( - _msg.line2))) - advanced.append(line2) - - if self.MODEL in ("UV-2501", "UV-5001"): - vfomren = RadioSetting("settings2.vfomren", "VFO/MR switching", - RadioSettingValueBoolean( - _mem.settings2.vfomren)) - advanced.append(vfomren) - - reseten = RadioSetting("settings2.reseten", "RESET", - RadioSettingValueBoolean( - _mem.settings2.reseten)) - advanced.append(reseten) - - menuen = RadioSetting("settings2.menuen", "Menu", - RadioSettingValueBoolean( - _mem.settings2.menuen)) - advanced.append(menuen) - - # Other - def convert_bytes_to_limit(bytes): - limit = "" - for byte in bytes: - if byte < 10: - limit += chr(byte + 0x30) - else: - break - return limit - - if self.MODEL in ["UV-2501+220", "KT8900R"]: - _ranges = self._memobj.ranges220 - ranges = "ranges220" - else: - _ranges = self._memobj.ranges - ranges = "ranges" - - _limit = convert_bytes_to_limit(_ranges.vhf_low) - val = RadioSettingValueString(0, 3, _limit) - val.set_mutable(False) - vhf_low = RadioSetting("%s.vhf_low" % ranges, "VHF low", val) - other.append(vhf_low) - - _limit = convert_bytes_to_limit(_ranges.vhf_high) - val = RadioSettingValueString(0, 3, _limit) - val.set_mutable(False) - vhf_high = RadioSetting("%s.vhf_high" % ranges, "VHF high", val) - other.append(vhf_high) - - if self.MODEL in ["UV-2501+220", "KT8900R"]: - _limit = convert_bytes_to_limit(_ranges.vhf2_low) - val = RadioSettingValueString(0, 3, _limit) - val.set_mutable(False) - vhf2_low = RadioSetting("%s.vhf2_low" % ranges, "VHF2 low", val) - other.append(vhf2_low) - - _limit = convert_bytes_to_limit(_ranges.vhf2_high) - val = RadioSettingValueString(0, 3, _limit) - val.set_mutable(False) - vhf2_high = RadioSetting("%s.vhf2_high" % ranges, "VHF2 high", val) - other.append(vhf2_high) - - _limit = convert_bytes_to_limit(_ranges.uhf_low) - val = RadioSettingValueString(0, 3, _limit) - val.set_mutable(False) - uhf_low = RadioSetting("%s.uhf_low" % ranges, "UHF low", val) - other.append(uhf_low) - - _limit = convert_bytes_to_limit(_ranges.uhf_high) - val = RadioSettingValueString(0, 3, _limit) - val.set_mutable(False) - uhf_high = RadioSetting("%s.uhf_high" % ranges, "UHF high", val) - other.append(uhf_high) - - val = RadioSettingValueString(0, 6, _filter(_mem.fingerprint.fp)) - val.set_mutable(False) - fp = RadioSetting("fingerprint.fp", "Fingerprint", val) - other.append(fp) - - # Work - dispab = RadioSetting("settings2.dispab", "Display", - RadioSettingValueList(LIST_AB,LIST_AB[ - _mem.settings2.dispab])) - work.append(dispab) - - vfomr = RadioSetting("settings2.vfomr", "VFO/MR mode", - RadioSettingValueList(LIST_VFOMR,LIST_VFOMR[ - _mem.settings2.vfomr])) - work.append(vfomr) - - keylock = RadioSetting("settings2.keylock", "Keypad lock", - RadioSettingValueBoolean(_mem.settings2.keylock)) - work.append(keylock) - - mrcha = RadioSetting("settings2.mrcha", "MR A channel", - RadioSettingValueInteger(0, 199, - _mem.settings2.mrcha)) - work.append(mrcha) - - mrchb = RadioSetting("settings2.mrchb", "MR B channel", - RadioSettingValueInteger(0, 199, - _mem.settings2.mrchb)) - work.append(mrchb) - - def convert_bytes_to_freq(bytes): - real_freq = 0 - for byte in bytes: - real_freq = (real_freq * 10) + byte - return chirp_common.format_freq(real_freq * 10) - - def my_validate(value): - value = chirp_common.parse_freq(value) - if "+220" in self.MODEL: - if 180000000 <= value and value < 210000000: - msg = ("Can't be between 180.00000-210.00000") - raise InvalidValueError(msg) - elif 231000000 <= value and value < 400000000: - msg = ("Can't be between 231.00000-400.00000") - raise InvalidValueError(msg) - elif "8900R" in self.MODEL: - if 180000000 <= value and value < 240000000: - msg = ("Can't be between 180.00000-240.00000") - raise InvalidValueError(msg) - elif 271000000 <= value and value < 400000000: - msg = ("Can't be between 271.00000-400.00000") - raise InvalidValueError(msg) - elif 180000000 <= value and value < 400000000: - msg = ("Can't be between 180.00000-400.00000") - raise InvalidValueError(msg) - return chirp_common.format_freq(value) - - def apply_freq(setting, obj): - value = chirp_common.parse_freq(str(setting.value)) / 10 - for i in range(7, -1, -1): - obj.freq[i] = value % 10 - value /= 10 - - val1a = RadioSettingValueString(0, 10, convert_bytes_to_freq( - _mem.vfo.a.freq)) - val1a.set_validate_callback(my_validate) - vfoafreq = RadioSetting("vfo.a.freq", "VFO A frequency", val1a) - vfoafreq.set_apply_callback(apply_freq, _mem.vfo.a) - work.append(vfoafreq) - - val1b = RadioSettingValueString(0, 10, convert_bytes_to_freq( - _mem.vfo.b.freq)) - val1b.set_validate_callback(my_validate) - vfobfreq = RadioSetting("vfo.b.freq", "VFO B frequency", val1b) - vfobfreq.set_apply_callback(apply_freq, _mem.vfo.b) - work.append(vfobfreq) - - vfoashiftd = RadioSetting("vfo.a.shiftd", "VFO A shift", - RadioSettingValueList(LIST_SHIFT, LIST_SHIFT[ - _mem.vfo.a.shiftd])) - work.append(vfoashiftd) - - vfobshiftd = RadioSetting("vfo.b.shiftd", "VFO B shift", - RadioSettingValueList(LIST_SHIFT, LIST_SHIFT[ - _mem.vfo.b.shiftd])) - work.append(vfobshiftd) - - def convert_bytes_to_offset(bytes): - real_offset = 0 - for byte in bytes: - real_offset = (real_offset * 10) + byte - return chirp_common.format_freq(real_offset * 10000) - - def apply_offset(setting, obj): - value = chirp_common.parse_freq(str(setting.value)) / 10000 - for i in range(3, -1, -1): - obj.offset[i] = value % 10 - value /= 10 - - val1a = RadioSettingValueString(0, 10, convert_bytes_to_offset( - _mem.vfo.a.offset)) - vfoaoffset = RadioSetting("vfo.a.offset", - "VFO A offset (0.00-99.95)", val1a) - vfoaoffset.set_apply_callback(apply_offset, _mem.vfo.a) - work.append(vfoaoffset) - - val1b = RadioSettingValueString(0, 10, convert_bytes_to_offset( - _mem.vfo.b.offset)) - vfoboffset = RadioSetting("vfo.b.offset", - "VFO B offset (0.00-99.95)", val1b) - vfoboffset.set_apply_callback(apply_offset, _mem.vfo.b) - work.append(vfoboffset) - - vfoatxp = RadioSetting("vfo.a.power", "VFO A power", - RadioSettingValueList(LIST_TXP,LIST_TXP[ - _mem.vfo.a.power])) - work.append(vfoatxp) - - vfobtxp = RadioSetting("vfo.b.power", "VFO B power", - RadioSettingValueList(LIST_TXP,LIST_TXP[ - _mem.vfo.b.power])) - work.append(vfobtxp) - - vfoawide = RadioSetting("vfo.a.wide", "VFO A bandwidth", - RadioSettingValueList(LIST_WIDE,LIST_WIDE[ - _mem.vfo.a.wide])) - work.append(vfoawide) - - vfobwide = RadioSetting("vfo.b.wide", "VFO B bandwidth", - RadioSettingValueList(LIST_WIDE,LIST_WIDE[ - _mem.vfo.b.wide])) - work.append(vfobwide) - - vfoastep = RadioSetting("vfo.a.step", "VFO A step", - RadioSettingValueList(LIST_STEP,LIST_STEP[ - _mem.vfo.a.step])) - work.append(vfoastep) - - vfobstep = RadioSetting("vfo.b.step", "VFO B step", - RadioSettingValueList(LIST_STEP,LIST_STEP[ - _mem.vfo.b.step])) - work.append(vfobstep) - - vfoaoptsig = RadioSetting("vfo.a.optsig", "VFO A optional signal", - RadioSettingValueList(OPTSIG_LIST, - OPTSIG_LIST[_mem.vfo.a.optsig])) - work.append(vfoaoptsig) - - vfoboptsig = RadioSetting("vfo.b.optsig", "VFO B optional signal", - RadioSettingValueList(OPTSIG_LIST, - OPTSIG_LIST[_mem.vfo.b.optsig])) - work.append(vfoboptsig) - - vfoaspmute = RadioSetting("vfo.a.spmute", "VFO A speaker mute", - RadioSettingValueList(SPMUTE_LIST, - SPMUTE_LIST[_mem.vfo.a.spmute])) - work.append(vfoaspmute) - - vfobspmute = RadioSetting("vfo.b.spmute", "VFO B speaker mute", - RadioSettingValueList(SPMUTE_LIST, - SPMUTE_LIST[_mem.vfo.b.spmute])) - work.append(vfobspmute) - - vfoascr = RadioSetting("vfo.a.scramble", "VFO A scramble", - RadioSettingValueBoolean(_mem.vfo.a.scramble)) - work.append(vfoascr) - - vfobscr = RadioSetting("vfo.b.scramble", "VFO B scramble", - RadioSettingValueBoolean(_mem.vfo.b.scramble)) - work.append(vfobscr) - - vfoascode = RadioSetting("vfo.a.scode", "VFO A PTT-ID", - RadioSettingValueList(PTTIDCODE_LIST, - PTTIDCODE_LIST[_mem.vfo.a.scode])) - work.append(vfoascode) - - vfobscode = RadioSetting("vfo.b.scode", "VFO B PTT-ID", - RadioSettingValueList(PTTIDCODE_LIST, - PTTIDCODE_LIST[_mem.vfo.b.scode])) - work.append(vfobscode) - - pttid = RadioSetting("settings.pttid", "PTT ID", - RadioSettingValueList(PTTID_LIST, - PTTID_LIST[_mem.settings.pttid])) - work.append(pttid) - - #FM presets - def fm_validate(value): - if value == 0: - return chirp_common.format_freq(value) - if not (87.5 <= value and value <= 108.0): # 87.5-108MHz - msg = ("FM-Preset-Frequency: Must be between 87.5 and 108 MHz") - raise InvalidValueError(msg) - return value - - def apply_fm_preset_name(setting, obj): - valstring = str (setting.value) - for i in range(0,6): - if valstring[i] in VALID_CHARS: - obj[i] = valstring[i] - else: - obj[i] = '0xff' - - def apply_fm_freq(setting, obj): - value = chirp_common.parse_freq(str(setting.value)) / 10 - for i in range(7, -1, -1): - obj.freq[i] = value % 10 - value /= 10 - - _presets = self._memobj.fm_radio_preset - i = 1 - for preset in _presets: - line = RadioSetting("fm_presets_"+ str(i), "Station name " + str(i), - RadioSettingValueString(0, 6, _filter( - preset.broadcast_station_name))) - line.set_apply_callback(apply_fm_preset_name, - preset.broadcast_station_name) - - val = RadioSettingValueFloat(0, 108, convert_bytes_to_freq(preset.freq)) - fmfreq = RadioSetting("fm_presets_"+ str(i) + "_freq", "Frequency "+ str(i), val) - val.set_validate_callback(fm_validate) - fmfreq.set_apply_callback(apply_fm_freq, preset) - fm_presets.append(line) - fm_presets.append(fmfreq) - - i = i + 1 - - # DTMF-Setting - dtmf_enc_settings = RadioSettingGroup ("dtmf_enc_settings", - "DTMF Encoding Settings") - dtmf_dec_settings = RadioSettingGroup ("dtmf_dec_settings", - "DTMF Decoding Settings") - top.append(dtmf_enc_settings) - top.append(dtmf_dec_settings) - txdisable = RadioSetting("dtmf_settings.txdisable", - "TX-Disable", - RadioSettingValueBoolean( - _mem.dtmf_settings.txdisable)) - dtmf_enc_settings.append(txdisable) - - rxdisable = RadioSetting("dtmf_settings.rxdisable", - "RX-Disable", - RadioSettingValueBoolean( - _mem.dtmf_settings.rxdisable)) - dtmf_enc_settings.append(rxdisable) - - dtmfspeed_on = RadioSetting( - "dtmf_settings.dtmfspeed_on", - "DTMF Speed (On Time)", - RadioSettingValueList(LIST_DTMF_SPEED, - LIST_DTMF_SPEED[ - _mem.dtmf_settings.dtmfspeed_on])) - dtmf_enc_settings.append(dtmfspeed_on) - - dtmfspeed_off = RadioSetting( - "dtmf_settings.dtmfspeed_off", - "DTMF Speed (Off Time)", - RadioSettingValueList(LIST_DTMF_SPEED, - LIST_DTMF_SPEED[ - _mem.dtmf_settings.dtmfspeed_off])) - dtmf_enc_settings.append(dtmfspeed_off) - - def memory2string(dmtf_mem): - dtmf_string = "" - for digit in dmtf_mem: - if digit != 255: - index = LIST_DTMF_VALUES.index(digit) - dtmf_string = dtmf_string + LIST_DTMF_DIGITS[index] - return dtmf_string - - def apply_dmtf_frame(setting, obj): - LOG.debug("Setting DTMF-Code: " + str(setting.value) ) - val_string = str(setting.value) - for i in range(0,16): - obj[i] = 255 - i = 0 - for current_char in val_string: - current_char = current_char.upper() - index = LIST_DTMF_DIGITS.index(current_char) - obj[i] = LIST_DTMF_VALUES[ index ] - i = i + 1 - - codes = self._memobj.dtmf_codes - i = 1 - for dtmfcode in codes: - val = RadioSettingValueString(0, 16, - memory2string(dtmfcode.code), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_code_" + str(i) + "_code", - "DMTF Code " + str(i), val) - line.set_apply_callback(apply_dmtf_frame, dtmfcode.code) - dtmf_enc_settings.append(line) - i = i + 1 - - line = RadioSetting("dtmf_settings.mastervice", - "Master and Vice ID", - RadioSettingValueBoolean( - _mem.dtmf_settings.mastervice)) - dtmf_dec_settings.append(line) - - val = RadioSettingValueString(0, 16, - memory2string( - _mem.dtmf_settings.masterid), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_settings.masterid", - "Master Control ID ", val) - line.set_apply_callback(apply_dmtf_frame, - _mem.dtmf_settings.masterid) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.minspection", - "Master Inspection", - RadioSettingValueBoolean( - _mem.dtmf_settings.minspection)) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.mmonitor", - "Master Monitor", - RadioSettingValueBoolean( - _mem.dtmf_settings.mmonitor)) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.mstun", - "Master Stun", - RadioSettingValueBoolean( - _mem.dtmf_settings.mstun)) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.mkill", - "Master Kill", - RadioSettingValueBoolean( - _mem.dtmf_settings.mkill)) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.mrevive", - "Master Revive", - RadioSettingValueBoolean( - _mem.dtmf_settings.mrevive)) - dtmf_dec_settings.append(line) - - val = RadioSettingValueString(0, 16, - memory2string( - _mem.dtmf_settings.viceid), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_settings.viceid", - "Vice Control ID ", val) - line.set_apply_callback(apply_dmtf_frame, - _mem.dtmf_settings.viceid) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.vinspection", - "Vice Inspection", - RadioSettingValueBoolean( - _mem.dtmf_settings.vinspection)) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.vmonitor", - "Vice Monitor", - RadioSettingValueBoolean( - _mem.dtmf_settings.vmonitor)) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.vstun", - "Vice Stun", - RadioSettingValueBoolean( - _mem.dtmf_settings.vstun)) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.vkill", - "Vice Kill", - RadioSettingValueBoolean( - _mem.dtmf_settings.vkill)) - dtmf_dec_settings.append(line) - - line = RadioSetting("dtmf_settings.vrevive", - "Vice Revive", - RadioSettingValueBoolean( - _mem.dtmf_settings.vrevive)) - dtmf_dec_settings.append(line) - - val = RadioSettingValueString(0, 16, - memory2string( - _mem.dtmf_settings.inspection), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_settings.inspection", - "Inspection", val) - line.set_apply_callback(apply_dmtf_frame, - _mem.dtmf_settings.inspection) - dtmf_dec_settings.append(line) - - val = RadioSettingValueString(0, 16, - memory2string( - _mem.dtmf_settings.alarmcode), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_settings.alarmcode", - "Alarm", val) - line.set_apply_callback(apply_dmtf_frame, - _mem.dtmf_settings.alarmcode) - dtmf_dec_settings.append(line) - - val = RadioSettingValueString(0, 16, - memory2string( - _mem.dtmf_settings.kill), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_settings.kill", - "Kill", val) - line.set_apply_callback(apply_dmtf_frame, - _mem.dtmf_settings.kill) - dtmf_dec_settings.append(line) - - val = RadioSettingValueString(0, 16, - memory2string( - _mem.dtmf_settings.monitor), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_settings.monitor", - "Monitor", val) - line.set_apply_callback(apply_dmtf_frame, - _mem.dtmf_settings.monitor) - dtmf_dec_settings.append(line) - - val = RadioSettingValueString(0, 16, - memory2string( - _mem.dtmf_settings.stun), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_settings.stun", - "Stun", val) - line.set_apply_callback(apply_dmtf_frame, - _mem.dtmf_settings.stun) - dtmf_dec_settings.append(line) - - val = RadioSettingValueString(0, 16, - memory2string( - _mem.dtmf_settings.revive), - False, CHARSET_DTMF_DIGITS) - line = RadioSetting("dtmf_settings.revive", - "Revive", val) - line.set_apply_callback(apply_dmtf_frame, - _mem.dtmf_settings.revive) - dtmf_dec_settings.append(line) - - def apply_dmtf_listvalue(setting, obj): - LOG.debug("Setting value: "+ str(setting.value) + " from list") - val = str(setting.value) - index = LIST_DTMF_SPECIAL_DIGITS.index(val) - val = LIST_DTMF_SPECIAL_VALUES[index] - obj.set_value(val) - - idx = LIST_DTMF_SPECIAL_VALUES.index(_mem.dtmf_settings.groupcode) - line = RadioSetting( - "dtmf_settings.groupcode", - "Group Code", - RadioSettingValueList(LIST_DTMF_SPECIAL_DIGITS, - LIST_DTMF_SPECIAL_DIGITS[idx])) - line.set_apply_callback(apply_dmtf_listvalue, - _mem.dtmf_settings.groupcode) - dtmf_dec_settings.append(line) - - idx = LIST_DTMF_SPECIAL_VALUES.index(_mem.dtmf_settings.spacecode) - line = RadioSetting( - "dtmf_settings.spacecode", - "Space Code", - RadioSettingValueList(LIST_DTMF_SPECIAL_DIGITS, - LIST_DTMF_SPECIAL_DIGITS[idx])) - line.set_apply_callback(apply_dmtf_listvalue, - _mem.dtmf_settings.spacecode) - dtmf_dec_settings.append(line) - - line = RadioSetting( - "dtmf_settings.resettime", - "Reset time", - RadioSettingValueList(LIST_5TONE_RESET, - LIST_5TONE_RESET[ - _mem.dtmf_settings.resettime])) - dtmf_dec_settings.append(line) - - line = RadioSetting( - "dtmf_settings.delayproctime", - "Delay processing time", - RadioSettingValueList(LIST_DTMF_DELAY, - LIST_DTMF_DELAY[ - _mem.dtmf_settings.delayproctime])) - dtmf_dec_settings.append(line) - - - # 5 Tone Settings - stds_5tone = RadioSettingGroup ("stds_5tone", "Standards") - codes_5tone = RadioSettingGroup ("codes_5tone", "Codes") - - group_5tone = RadioSettingGroup ("group_5tone", "5 Tone Settings") - group_5tone.append(stds_5tone) - group_5tone.append(codes_5tone) - - top.append(group_5tone) - - def apply_list_value(setting, obj): - options = setting.value.get_options() - obj.set_value ( options.index(str(setting.value)) ) - - _5tone_standards = self._memobj._5tone_std_settings - i = 0 - for standard in _5tone_standards: - std_5tone = RadioSettingGroup ("std_5tone_" + str(i), - LIST_5TONE_STANDARDS[i]) - stds_5tone.append(std_5tone) - - period = standard.period - if period == 255: - LOG.debug("Period for " + LIST_5TONE_STANDARDS[i] + - " is not yet configured. Setting to 70ms.") - period = 5 - - if period <= len( LIST_5TONE_STANDARD_PERIODS ): - line = RadioSetting( - "_5tone_std_settings_" + str(i) + "_period", - "Period (ms)", RadioSettingValueList - (LIST_5TONE_STANDARD_PERIODS, - LIST_5TONE_STANDARD_PERIODS[period])) - line.set_apply_callback(apply_list_value, standard.period) - std_5tone.append(line) - else: - LOG.debug("Invalid value for 5tone period! Disabling.") - - group_tone = standard.group_tone - if group_tone == 255: - LOG.debug("Group-Tone for " + LIST_5TONE_STANDARDS[i] + - " is not yet configured. Setting to A.") - group_tone = 10 - - if group_tone <= len( LIST_5TONE_DIGITS ): - line = RadioSetting( - "_5tone_std_settings_" + str(i) + "_grouptone", - "Group Tone", - RadioSettingValueList(LIST_5TONE_DIGITS, - LIST_5TONE_DIGITS[ - group_tone])) - line.set_apply_callback(apply_list_value, - standard.group_tone) - std_5tone.append(line) - else: - LOG.debug("Invalid value for 5tone digit! Disabling.") - - repeat_tone = standard.repeat_tone - if repeat_tone == 255: - LOG.debug("Repeat-Tone for " + LIST_5TONE_STANDARDS[i] + - " is not yet configured. Setting to E.") - repeat_tone = 14 - - if repeat_tone <= len( LIST_5TONE_DIGITS ): - line = RadioSetting( - "_5tone_std_settings_" + str(i) + "_repttone", - "Repeat Tone", - RadioSettingValueList(LIST_5TONE_DIGITS, - LIST_5TONE_DIGITS[ - repeat_tone])) - line.set_apply_callback(apply_list_value, - standard.repeat_tone) - std_5tone.append(line) - else: - LOG.debug("Invalid value for 5tone digit! Disabling.") - i = i + 1 - - def my_apply_5tonestdlist_value(setting, obj): - if LIST_5TONE_STANDARDS.index(str(setting.value)) == 15: - obj.set_value(0xFF) - else: - obj.set_value( LIST_5TONE_STANDARDS. - index(str(setting.value)) ) - - def apply_5tone_frame(setting, obj): - LOG.debug("Setting 5 Tone: " + str(setting.value) ) - valstring = str(setting.value) - if len(valstring) == 0: - for i in range(0,5): - obj[i] = 255 - else: - validFrame = True - for i in range(0,5): - currentChar = valstring[i].upper() - if currentChar in LIST_5TONE_DIGITS: - obj[i] = LIST_5TONE_DIGITS.index(currentChar) - else: - validFrame = False - LOG.debug("invalid char: " + str(currentChar)) - if not validFrame: - LOG.debug("setting whole frame to FF" ) - for i in range(0,5): - obj[i] = 255 - - def validate_5tone_frame(value): - if (len(str(value)) != 5) and (len(str(value)) != 0) : - msg = ("5 Tone must have 5 digits or 0 digits") - raise InvalidValueError(msg) - for digit in str(value): - if digit.upper() not in LIST_5TONE_DIGITS: - msg = (str(digit) + " is not a valid digit for 5tones") - raise InvalidValueError(msg) - return value - - def frame2string(frame): - frameString = "" - for digit in frame: - if digit != 255: - frameString = frameString + LIST_5TONE_DIGITS[digit] - return frameString - - _5tone_codes = self._memobj._5tone_codes - i = 1 - for code in _5tone_codes: - code_5tone = RadioSettingGroup ("code_5tone_" + str(i), - "5 Tone code " + str(i)) - codes_5tone.append(code_5tone) - if (code.standard == 255 ): - currentVal = 15 - else: - currentVal = code.standard - line = RadioSetting("_5tone_code_" + str(i) + "_std", - " Standard", - RadioSettingValueList(LIST_5TONE_STANDARDS, - LIST_5TONE_STANDARDS[ - currentVal]) ) - line.set_apply_callback(my_apply_5tonestdlist_value, - code.standard) - code_5tone.append(line) - - val = RadioSettingValueString(0, 6, - frame2string(code.frame1), False) - line = RadioSetting("_5tone_code_" + str(i) + "_frame1", - " Frame 1", val) - val.set_validate_callback(validate_5tone_frame) - line.set_apply_callback(apply_5tone_frame, code.frame1) - code_5tone.append(line) - - val = RadioSettingValueString(0, 6, - frame2string(code.frame2), False) - line = RadioSetting("_5tone_code_" + str(i) + "_frame2", - " Frame 2", val) - val.set_validate_callback(validate_5tone_frame) - line.set_apply_callback(apply_5tone_frame, code.frame2) - code_5tone.append(line) - - val = RadioSettingValueString(0, 6, - frame2string(code.frame3), False) - line = RadioSetting("_5tone_code_" + str(i) + "_frame3", - " Frame 3", val) - val.set_validate_callback(validate_5tone_frame) - line.set_apply_callback(apply_5tone_frame, code.frame3) - code_5tone.append(line) - i = i + 1 - - _5_tone_decode1 = RadioSetting( - "_5tone_settings._5tone_decode_call_frame1", - "5 Tone decode call Frame 1", - RadioSettingValueBoolean( - _mem._5tone_settings._5tone_decode_call_frame1)) - group_5tone.append(_5_tone_decode1) - - _5_tone_decode2 = RadioSetting( - "_5tone_settings._5tone_decode_call_frame2", - "5 Tone decode call Frame 2", - RadioSettingValueBoolean( - _mem._5tone_settings._5tone_decode_call_frame2)) - group_5tone.append(_5_tone_decode2) - - _5_tone_decode3 = RadioSetting( - "_5tone_settings._5tone_decode_call_frame3", - "5 Tone decode call Frame 3", - RadioSettingValueBoolean( - _mem._5tone_settings._5tone_decode_call_frame3)) - group_5tone.append(_5_tone_decode3) - - _5_tone_decode_disp1 = RadioSetting( - "_5tone_settings._5tone_decode_disp_frame1", - "5 Tone decode disp Frame 1", - RadioSettingValueBoolean( - _mem._5tone_settings._5tone_decode_disp_frame1)) - group_5tone.append(_5_tone_decode_disp1) - - _5_tone_decode_disp2 = RadioSetting( - "_5tone_settings._5tone_decode_disp_frame2", - "5 Tone decode disp Frame 2", - RadioSettingValueBoolean( - _mem._5tone_settings._5tone_decode_disp_frame2)) - group_5tone.append(_5_tone_decode_disp2) - - _5_tone_decode_disp3 = RadioSetting( - "_5tone_settings._5tone_decode_disp_frame3", - "5 Tone decode disp Frame 3", - RadioSettingValueBoolean( - _mem._5tone_settings._5tone_decode_disp_frame3)) - group_5tone.append(_5_tone_decode_disp3) - - decode_standard = _mem._5tone_settings.decode_standard - if decode_standard == 255: - decode_standard = 0 - if decode_standard <= len (LIST_5TONE_STANDARDS_without_none) : - line = RadioSetting("_5tone_settings.decode_standard", - "5 Tone-decode Standard", - RadioSettingValueList( - LIST_5TONE_STANDARDS_without_none, - LIST_5TONE_STANDARDS_without_none[ - decode_standard])) - group_5tone.append(line) - else: - LOG.debug("Invalid decode std...") - - _5tone_delay1 = _mem._5tone_settings._5tone_delay1 - if _5tone_delay1 == 255: - _5tone_delay1 = 20 - - if _5tone_delay1 <= len( LIST_5TONE_DELAY ): - list = RadioSettingValueList(LIST_5TONE_DELAY, - LIST_5TONE_DELAY[ - _5tone_delay1]) - line = RadioSetting("_5tone_settings._5tone_delay1", - "5 Tone Delay Frame 1", list) - group_5tone.append(line) - else: - LOG.debug("Invalid value for 5tone delay (frame1) ! Disabling.") - - _5tone_delay2 = _mem._5tone_settings._5tone_delay2 - if _5tone_delay2 == 255: - _5tone_delay2 = 20 - LOG.debug("5 Tone delay unconfigured! Resetting to 200ms.") - - if _5tone_delay2 <= len( LIST_5TONE_DELAY ): - list = RadioSettingValueList(LIST_5TONE_DELAY, - LIST_5TONE_DELAY[ - _5tone_delay2]) - line = RadioSetting("_5tone_settings._5tone_delay2", - "5 Tone Delay Frame 2", list) - group_5tone.append(line) - else: - LOG.debug("Invalid value for 5tone delay (frame2)! Disabling.") - - _5tone_delay3 = _mem._5tone_settings._5tone_delay3 - if _5tone_delay3 == 255: - _5tone_delay3 = 20 - LOG.debug("5 Tone delay unconfigured! Resetting to 200ms.") - - if _5tone_delay3 <= len( LIST_5TONE_DELAY ): - list = RadioSettingValueList(LIST_5TONE_DELAY, - LIST_5TONE_DELAY[ - _5tone_delay3]) - line = RadioSetting("_5tone_settings._5tone_delay3", - "5 Tone Delay Frame 3", list ) - group_5tone.append(line) - else: - LOG.debug("Invalid value for 5tone delay (frame3)! Disabling.") - - ext_length = _mem._5tone_settings._5tone_first_digit_ext_length - if ext_length == 255: - ext_length = 0 - LOG.debug("1st Tone ext lenght unconfigured! Resetting to 0") - - if ext_length <= len( - LIST_5TONE_DELAY ): - list = RadioSettingValueList( - LIST_5TONE_DELAY, - LIST_5TONE_DELAY[ - ext_length]) - line = RadioSetting( - "_5tone_settings._5tone_first_digit_ext_length", - "First digit extend length", list) - group_5tone.append(line) - else: - LOG.debug("Invalid value for 5tone ext length! Disabling.") - - decode_reset_time = _mem._5tone_settings.decode_reset_time - if decode_reset_time == 255: - decode_reset_time = 59 - LOG.debug("Decode reset time unconfigured. resetting.") - if decode_reset_time <= len(LIST_5TONE_RESET): - list = RadioSettingValueList( - LIST_5TONE_RESET, - LIST_5TONE_RESET[ - decode_reset_time]) - line = RadioSetting("_5tone_settings.decode_reset_time", - "Decode reset time", list) - group_5tone.append(line) - else: - LOG.debug("Invalid value decode reset time! Disabling.") - - # 2 Tone - encode_2tone = RadioSettingGroup ("encode_2tone", "2 Tone Encode") - decode_2tone = RadioSettingGroup ("decode_2tone", "2 Code Decode") - - top.append(encode_2tone) - top.append(decode_2tone) - - duration_1st_tone = self._memobj._2tone.duration_1st_tone - if duration_1st_tone == 255: - LOG.debug("Duration of first 2 Tone digit is not yet " + - "configured. Setting to 600ms") - duration_1st_tone = 60 - - if duration_1st_tone <= len( LIST_5TONE_DELAY ): - line = RadioSetting("_2tone.duration_1st_tone", - "Duration 1st Tone", - RadioSettingValueList(LIST_5TONE_DELAY, - LIST_5TONE_DELAY[ - duration_1st_tone])) - encode_2tone.append(line) - - duration_2nd_tone = self._memobj._2tone.duration_2nd_tone - if duration_2nd_tone == 255: - LOG.debug("Duration of second 2 Tone digit is not yet " + - "configured. Setting to 600ms") - duration_2nd_tone = 60 - - if duration_2nd_tone <= len( LIST_5TONE_DELAY ): - line = RadioSetting("_2tone.duration_2nd_tone", - "Duration 2nd Tone", - RadioSettingValueList(LIST_5TONE_DELAY, - LIST_5TONE_DELAY[ - duration_2nd_tone])) - encode_2tone.append(line) - - duration_gap = self._memobj._2tone.duration_gap - if duration_gap == 255: - LOG.debug("Duration of gap is not yet " + - "configured. Setting to 300ms") - duration_gap = 30 - - if duration_gap <= len( LIST_5TONE_DELAY ): - line = RadioSetting("_2tone.duration_gap", "Duration of gap", - RadioSettingValueList(LIST_5TONE_DELAY, - LIST_5TONE_DELAY[ - duration_gap])) - encode_2tone.append(line) - - def _2tone_validate(value): - if value == 0: - return 65535 - if value == 65535: - return value - if not (300 <= value and value <= 3000): - msg = ("2 Tone Frequency: Must be between 300 and 3000 Hz") - raise InvalidValueError(msg) - return value - - def apply_2tone_freq(setting, obj): - val = int(setting.value) - if (val == 0) or (val == 65535): - obj.set_value(65535) - else: - obj.set_value(val) - - i = 1 - for code in self._memobj._2tone._2tone_encode: - code_2tone = RadioSettingGroup ("code_2tone_" + str(i), - "Encode Code " + str(i)) - encode_2tone.append(code_2tone) - - tmp = code.freq1 - if tmp == 65535: - tmp = 0 - val1 = RadioSettingValueInteger(0, 65535, tmp) - freq1 = RadioSetting("2tone_code_"+ str(i) + "_freq1", - "Frequency 1", val1) - val1.set_validate_callback(_2tone_validate) - freq1.set_apply_callback(apply_2tone_freq, code.freq1) - code_2tone.append(freq1) - - tmp = code.freq2 - if tmp == 65535: - tmp = 0 - val2 = RadioSettingValueInteger(0, 65535, tmp) - freq2 = RadioSetting("2tone_code_"+ str(i) + "_freq2", - "Frequency 2", val2) - val2.set_validate_callback(_2tone_validate) - freq2.set_apply_callback(apply_2tone_freq, code.freq2) - code_2tone.append(freq2) - - i = i + 1 - - decode_reset_time = _mem._2tone.reset_time - if decode_reset_time == 255: - decode_reset_time = 59 - LOG.debug("Decode reset time unconfigured. resetting.") - if decode_reset_time <= len(LIST_5TONE_RESET): - list = RadioSettingValueList( - LIST_5TONE_RESET, - LIST_5TONE_RESET[ - decode_reset_time]) - line = RadioSetting("_2tone.reset_time", - "Decode reset time", list) - decode_2tone.append(line) - else: - LOG.debug("Invalid value decode reset time! Disabling.") - - def apply_2tone_freq_pair(setting, obj): - val = int(setting.value) - derived_val = 65535 - frqname = str(setting._name[-5:]) - derivedname = "derived_from_" + frqname - - if (val == 0): - val = 65535 - derived_val = 65535 - else: - derived_val = int(round(2304000.0/val)) - - obj[frqname].set_value( val ) - obj[derivedname].set_value( derived_val ) - - LOG.debug("Apply " + frqname + ": " + str(val) + " | " - + derivedname + ": " + str(derived_val)) - - i = 1 - for decode_code in self._memobj._2tone._2tone_decode: - _2tone_dec_code = RadioSettingGroup ("code_2tone_" + str(i), - "Decode Code " + str(i)) - decode_2tone.append(_2tone_dec_code) - - j = 1 - for dec in decode_code.decs: - val = dec.dec - if val == 255: - LOG.debug("Dec for Code " + str(i) + " Dec " + str(j) + - " is not yet configured. Setting to 0.") - val = 0 - - if val <= len( LIST_2TONE_DEC ): - line = RadioSetting( - "_2tone_dec_settings_" + str(i) + "_dec_" + str(j), - "Dec " + str(j), RadioSettingValueList - (LIST_2TONE_DEC, - LIST_2TONE_DEC[val])) - line.set_apply_callback(apply_list_value, dec.dec) - _2tone_dec_code.append(line) - else: - LOG.debug("Invalid value for 2tone dec! Disabling.") - - val = dec.response - if val == 255: - LOG.debug("Response for Code " + str(i) + " Dec " + str(j)+ - " is not yet configured. Setting to 0.") - val = 0 - - if val <= len( LIST_2TONE_RESPONSE ): - line = RadioSetting( - "_2tone_dec_settings_" + str(i) + "_resp_" + str(j), - "Response " + str(j), RadioSettingValueList - (LIST_2TONE_RESPONSE, - LIST_2TONE_RESPONSE[val])) - line.set_apply_callback(apply_list_value, dec.response) - _2tone_dec_code.append(line) - else: - LOG.debug("Invalid value for 2tone response! Disabling.") - - val = dec.alert - if val == 255: - LOG.debug("Alert for Code " + str(i) + " Dec " + str(j) + - " is not yet configured. Setting to 0.") - val = 0 - - if val <= len( PTTIDCODE_LIST ): - line = RadioSetting( - "_2tone_dec_settings_" + str(i) + "_alert_" + str(j), - "Alert " + str(j), RadioSettingValueList - (PTTIDCODE_LIST, - PTTIDCODE_LIST[val])) - line.set_apply_callback(apply_list_value, dec.alert) - _2tone_dec_code.append(line) - else: - LOG.debug("Invalid value for 2tone alert! Disabling.") - j = j + 1 - - freq = self._memobj._2tone.freqs[i-1] - for char in ['A', 'B', 'C', 'D']: - setting_name = "freq" + str(char) - - tmp = freq[setting_name] - if tmp == 65535: - tmp = 0 - if tmp != 0: - expected = int(round(2304000.0/tmp)) - from_mem = freq["derived_from_" + setting_name] - if expected != from_mem: - LOG.error("Expected " + str(expected) + - " but read " + str(from_mem ) + - ". Disabling 2Tone Decode Freqs!") - break - val = RadioSettingValueInteger(0, 65535, tmp) - frq = RadioSetting("2tone_dec_"+ str(i) + "_freq" + str(char), - ("Decode Frequency " +str(char)), val) - val.set_validate_callback(_2tone_validate) - frq.set_apply_callback(apply_2tone_freq_pair, freq) - _2tone_dec_code.append(frq) - - i = i + 1 - - return top - - def set_settings(self, settings): - _settings = self._memobj.settings - for element in settings: - if not isinstance(element, RadioSetting): - if element.get_name() == "fm_preset": - self._set_fm_preset(element) - else: - self.set_settings(element) - continue - else: - try: - name = element.get_name() - if "." in name: - bits = name.split(".") - obj = self._memobj - for bit in bits[:-1]: - if "/" in bit: - bit, index = bit.split("/", 1) - index = int(index) - obj = getattr(obj, bit)[index] - else: - obj = getattr(obj, bit) - setting = bits[-1] - else: - obj = _settings - setting = element.get_name() - - if element.has_apply_callback(): - LOG.debug("Using apply callback") - element.run_apply_callback() - elif element.value.get_mutable(): - LOG.debug("Setting %s = %s" % (setting, element.value)) - setattr(obj, setting, element.value) - except Exception, e: - LOG.debug(element.get_name()) - raise - - @classmethod - def match_model(cls, filedata, filename): - match_size = False - match_model = False - - # testing the file data size - if len(filedata) == MEM_SIZE: - match_size = True - - # testing the firmware model fingerprint - match_model = model_match(cls, filedata) - - if match_size and match_model: - return True - else: - return False -

# Declaring Aliases (Clones of the real radios) class JT2705M(chirp_common.Alias): @@ -2630,6 +3109,7 @@ class UV2501_220(BTech): """Baofeng Tech UV2501+220""" MODEL = "UV-2501+220" + BANDS = 3 _magic = MSTRING_220 _id2 = UV2501_220pp_id _fileid = [UV2501_220G3_fp, @@ -2647,6 +3127,8 @@ UV5001G2_fp, UV5001alpha_fp, UV5001pp_fp] + _power_levels = [chirp_common.PowerLevel("High", watts=50), + chirp_common.PowerLevel("Low", watts=10)]

@directory.register @@ -2698,6 +3180,7 @@ """QYT KT8900R""" VENDOR = "QYT" MODEL = "KT8900R" + BANDS = 3 _vhf_range = (136000000, 175000000) _220_range = (240000000, 271000000) _uhf_range = (400000000, 481000000) @@ -2720,3 +3203,377 @@ _magic = MSTRING_KT8900 _fileid = [LT588UV_fp, LT588UV_fp1] + _power_levels = [chirp_common.PowerLevel("High", watts=60), + chirp_common.PowerLevel("Low", watts=10)] + + +COLOR_MEM_FORMAT = """ +#seekto 0x0000; +struct { + lbcd rxfreq[4]; + lbcd txfreq[4]; + ul16 rxtone; + ul16 txtone; + u8 unknown0:4, + scode:4; + u8 unknown1:2, + spmute:1, + unknown2:3, + optsig:2; + u8 unknown3:3, + scramble:1, + unknown4:3, + power:1; + u8 unknown5:1, + wide:1, + unknown6:2, + bcl:1, + add:1, + pttid:2; +} memory[200]; + +#seekto 0x0E00; +struct { + u8 tmr; + u8 unknown1; + u8 sql; + u8 unknown2[2]; + u8 tot; + u8 apo; + u8 unknown3; + u8 abr; + u8 beep; + u8 unknown4[4]; + u8 dtmfst; + u8 unknown5[2]; + u8 screv; + u8 unknown6[2]; + u8 pttid; + u8 pttlt; + u8 unknown7; + u8 emctp; + u8 emcch; + u8 sigbp; + u8 unknown8; + u8 camdf; + u8 cbmdf; + u8 ccmdf; + u8 cdmdf; + u8 langua; + u8 sync; // BTech radios use this as the display sync + // setting, other radios use this as the auto + // keypad lock setting + u8 mainfc; + u8 mainbc; + u8 menufc; + u8 menubc; + u8 stafc; + u8 stabc; + u8 sigfc; + u8 sigbc; + u8 rxfc; + u8 txfc; + u8 txdisp; + u8 unknown9[5]; + u8 anil; + u8 reps; + u8 repm; + u8 tmrmr; + u8 ste; + u8 rpste; + u8 rptdl; + u8 dtmfg; + u8 mgain; + u8 skiptx; + u8 scmode; +} settings; + +#seekto 0x0E80; +struct { + u8 unknown1; + u8 vfomr; + u8 keylock; + u8 unknown2; + u8 unknown3:4, + vfomren:1, + unknown4:1, + reseten:1, + menuen:1; + u8 unknown5[11]; + u8 dispab; + u8 unknown6[2]; + u8 menu; + u8 unknown7[7]; + u8 vfomra; + u8 vfomrb; + u8 vfomrc; + u8 vfomrd; + u8 mrcha; + u8 mrchb; + u8 mrchc; + u8 mrchd; +} settings2; + +struct settings_vfo { + u8 freq[8]; + u8 offset[6]; + u8 unknown2[2]; + ul16 rxtone; + ul16 txtone; + u8 scode; + u8 spmute; + u8 optsig; + u8 scramble; + u8 wide; + u8 power; + u8 shiftd; + u8 step; + u8 unknown3[4]; +}; + +#seekto 0x0F00; +struct { + struct settings_vfo a; + struct settings_vfo b; + struct settings_vfo c; + struct settings_vfo d; +} vfo; + +#seekto 0x0F80; +struct { + char line1[8]; + char line2[8]; + char line3[8]; + char line4[8]; + char line5[8]; + char line6[8]; + char line7[8]; + char line8[8]; +} poweron_msg; + +#seekto 0x1000; +struct { + char name[8]; + u8 unknown1[8]; +} names[200]; + +#seekto 0x2400; +struct { + u8 period; // one out of LIST_5TONE_STANDARD_PERIODS + u8 group_tone; + u8 repeat_tone; + u8 unused[13]; +} _5tone_std_settings[15]; + +#seekto 0x2500; +struct { + u8 frame1[5]; + u8 frame2[5]; + u8 frame3[5]; + u8 standard; // one out of LIST_5TONE_STANDARDS +} _5tone_codes[15]; + +#seekto 0x25F0; +struct { + u8 _5tone_delay1; // * 10ms + u8 _5tone_delay2; // * 10ms + u8 _5tone_delay3; // * 10ms + u8 _5tone_first_digit_ext_length; + u8 unknown1; + u8 unknown2; + u8 unknown3; + u8 unknown4; + u8 decode_standard; + u8 unknown5:5, + _5tone_decode_call_frame3:1, + _5tone_decode_call_frame2:1, + _5tone_decode_call_frame1:1; + u8 unknown6:5, + _5tone_decode_disp_frame3:1, + _5tone_decode_disp_frame2:1, + _5tone_decode_disp_frame1:1; + u8 decode_reset_time; // * 100 + 100ms +} _5tone_settings; + +#seekto 0x2900; +struct { + u8 code[16]; // 0=x0A, A=0x0D, B=0x0E, C=0x0F, D=0x00, #=0x0C *=0x0B +} dtmf_codes[15]; + +#seekto 0x29F0; +struct { + u8 dtmfspeed_on; //list with 50..2000ms in steps of 10 + u8 dtmfspeed_off; //list with 50..2000ms in steps of 10 + u8 unknown0[14]; + u8 inspection[16]; + u8 monitor[16]; + u8 alarmcode[16]; + u8 stun[16]; + u8 kill[16]; + u8 revive[16]; + u8 unknown1[16]; + u8 unknown2[16]; + u8 unknown3[16]; + u8 unknown4[16]; + u8 unknown5[16]; + u8 unknown6[16]; + u8 unknown7[16]; + u8 masterid[16]; + u8 viceid[16]; + u8 unused01:7, + mastervice:1; + u8 unused02:3, + mrevive:1, + mkill:1, + mstun:1, + mmonitor:1, + minspection:1; + u8 unused03:3, + vrevive:1, + vkill:1, + vstun:1, + vmonitor:1, + vinspection:1; + u8 unused04:6, + txdisable:1, + rxdisable:1; + u8 groupcode; + u8 spacecode; + u8 delayproctime; // * 100 + 100ms + u8 resettime; // * 100 + 100ms +} dtmf_settings; + +#seekto 0x2D00; +struct { + struct { + ul16 freq1; + u8 unused01[6]; + ul16 freq2; + u8 unused02[6]; + } _2tone_encode[15]; + u8 duration_1st_tone; // *10ms + u8 duration_2nd_tone; // *10ms + u8 duration_gap; // *10ms + u8 unused03[13]; + struct { + struct { + u8 dec; // one out of LIST_2TONE_DEC + u8 response; // one out of LIST_2TONE_RESPONSE + u8 alert; // 1-16 + } decs[4]; + u8 unused04[4]; + } _2tone_decode[15]; + u8 unused05[16]; + + struct { + ul16 freqA; + ul16 freqB; + ul16 freqC; + ul16 freqD; + // unknown what those values mean, but they are + // derived from configured frequencies + ul16 derived_from_freqA; // 2304000/freqA + ul16 derived_from_freqB; // 2304000/freqB + ul16 derived_from_freqC; // 2304000/freqC + ul16 derived_from_freqD; // 2304000/freqD + }freqs[15]; + u8 reset_time; // * 100 + 100ms - 100-8000ms +} _2tone; + +#seekto 0x3D80; +struct { + u8 vhf_low[3]; + u8 vhf_high[3]; + u8 unknown1[4]; + u8 unknown2[6]; + u8 vhf2_low[3]; + u8 vhf2_high[3]; + u8 unknown3[4]; + u8 unknown4[6]; + u8 uhf_low[3]; + u8 uhf_high[3]; + u8 unknown5[4]; + u8 unknown6[6]; + u8 uhf2_low[3]; + u8 uhf2_high[3]; +} ranges; + +#seekto 0x3F70; +struct { + char fp[6]; +} fingerprint; + +""" + + +class BTechColor(BTechMobileCommon): + """BTECH's Color LCD Mobile and alike radios""" + COLOR_LCD = True + NAME_LENGTH = 8 + + def process_mmap(self): + """Process the mem map into the mem object""" + + # Get it + self._memobj = bitwise.parse(COLOR_MEM_FORMAT, self._mmap) + + # load specific parameters from the radio image + self.set_options() + + def set_options(self): + """This is to read the options from the image and set it in the + environment, for now just the limits of the freqs in the VHF/UHF + ranges""" + + # setting the correct ranges for each radio type + ranges = self._memobj.ranges + + # the normal dual bands + vhf = _decode_ranges(ranges.vhf_low, ranges.vhf_high) + uhf = _decode_ranges(ranges.uhf_low, ranges.uhf_high) + + # DEBUG + LOG.info("Radio ranges: VHF %d to %d" % vhf) + LOG.info("Radio ranges: UHF %d to %d" % uhf) + + # the additional bands + if self.MODEL in ["KT8900D", ]: + # 200Mhz band + vhf2 = _decode_ranges(ranges.vhf2_low, ranges.vhf2_high) + LOG.info("Radio ranges: VHF(220) %d to %d" % vhf2) + self._220_range = vhf2 + + # 350Mhz band + uhf2 = _decode_ranges(ranges.uhf2_low, ranges.uhf2_high) + LOG.info("Radio ranges: UHF(350) %d to %d" % uhf2) + self._350_range = uhf2 + + # set the class with the real data + self._vhf_range = vhf + self._uhf_range = uhf + + +@directory.register +class KT7900D(BTechColor): + """QYT KT7900D""" + VENDOR = "QYT" + MODEL = "KT7900D" + BANDS = 4 + _vhf_range = (136000000, 175000000) + _220_range = (200000000, 271000000) + _uhf_range = (400000000, 481000000) + _350_range = (350000000, 371000000) + _magic = MSTRING_KT8900D + _fileid = [KT7900D_fp, ] + + +@directory.register +class KT8900D(BTechColor): + """QYT KT8900D""" + VENDOR = "QYT" + MODEL = "KT8900D" + BANDS = 2 + _vhf_range = (136000000, 175000000) + _uhf_range = (400000000, 481000000) + _magic = MSTRING_KT8900D + _fileid = [KT8900D_fp, ]