Baojie BJ-318 CHIRP Radio Images (*.img) file attached.

Jim KC9HI

---------- Forwarded message --------- From: Jim Unroe kc9hi@comcast.net Date: Mon, Apr 12, 2021 at 12:29 PM Subject: [PATCH 3 of 3] [BJ-318] Add support for the Baojie BJ-318 To: Rock.Unroe@gmail.com

# HG changeset patch # User Jim Unroe rock.unroe@gmail.com # Date 1618244518 14400 # Mon Apr 12 12:21:58 2021 -0400 # Node ID d1f3307170d3c5fc1ab329cf5e20d24df8a04960 # Parent 60b475e41306144198481bc84d428ef0ca6adb5b [BJ-318] Add support for the Baojie BJ-318

This patch adds support for the Bajoie BJ-318 mobile radio.

Research and main coding by Mark Hartong Assistance, pep8 compliance and submission by Jim Unroe

related to #6235

diff -r 60b475e41306 -r d1f3307170d3 chirp/drivers/lt725uv.py --- a/chirp/drivers/lt725uv.py Sun Apr 11 21:12:34 2021 -0400 +++ b/chirp/drivers/lt725uv.py Mon Apr 12 12:21:58 2021 -0400 @@ -1,6 +1,10 @@ # Copyright 2016-2021: # * Jim Unroe KC9HI, rock.unroe@gmail.com -# Modified for Baojie BJ-218: 2018 by Rick DeWitt (RJD), aa0rd@yahoo.com# +# Modified for Baojie BJ-218: 2018 +# Rick DeWitt (RJD), aa0rd@yahoo.com +# Modified for Baojie BJ-318: April 2021 +# Mark Hartong, AJ4YI mark.hartong@verizon.net +# # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 2 of the License, or @@ -32,12 +36,12 @@ MEM_FORMAT = """ #seekto 0x0200; struct { - u8 init_bank; - u8 volume; - u16 fm_freq; - u8 wtled; - u8 rxled; - u8 txled; + u8 init_bank; // determines which VFO is primary A or B + u8 volume; // not used BJ-318, band volume is controlled vfo u8 bvol + u16 fm_freq; // not used BJ-318, freq is controlled hello_lims u16 fm_318 + u8 wtled; // not used BJ-318 + u8 rxled; // not used BJ-318 + u8 txled; // not used BJ-318 u8 ledsw; u8 beep; u8 ring; @@ -45,7 +49,7 @@ u8 tot; u16 sig_freq; u16 dtmf_txms; - u8 init_sql; + u8 init_sql; // not used BJ-318, band squelch is controlled vfo u8 sql u8 rptr_mode; } settings;

@@ -92,15 +96,25 @@

#seekto 0x02d0; struct { - u8 hello1_cnt; - char hello1[7]; - u8 hello2_cnt; - char hello2[7]; + u8 hello1_cnt; // not used in BJ-318, is set in memory map + char hello1[7]; // not used in BJ-318, is set in memory map + u8 hello2_cnt; // not used in BJ-318, is set in memory map + char hello2[7]; // not used in BJ-318, is set in memory map u32 vhf_low; u32 vhf_high; u32 uhf_low; u32 uhf_high; - u8 lims_on; + u8 lims_on; // first byte @ at address 0x02f0; + u8 unknown_1; // use in BJ-318 unknown + u8 lang; // BJ-318 Display language + // 02 = English 00 and 01 are Asian + u8 up_scr_color; // BJ-318 upper screen character color + u8 dn_scr_color; // BJ-318 lower screen character color + // purple=00, red=01, emerald=02, blue=03, + // sky_blue=04, black=05, required hex values for color + // Note sky_blue and black look the same on the + // BJ-318 screen + u16 fm_318; // FM stored Frequency in BJ-318 } hello_lims;

struct vfo { @@ -117,14 +131,18 @@ tx_tone:14; u8 launch_sig; u8 tx_end_sig; - u8 bpower; + u8 bpower; // sets power Hi=02h, Medium=01h, Low=00 + // sets power for entire vfo band u8 fm_bw; u8 cmp_nder; u8 scrm_blr; u8 shift; u32 offset; u16 step; - u8 sql; + u8 sql; // squelch for entire vfo band + // integer values 0 (low) to 9 (high) + u8 bvol; // sets volume for vfo band + // integer values 0 (low) TO 10 (high) };

#seekto 0x0300; @@ -149,7 +167,11 @@ txtone:14; u8 botsignal; u8 eotsignal; - u8 power:1, + u8 power:1, // binary value for + // indiviudal channel power + // set to "High" or "Low" + // BJ-318 band power overrides any + // individual channel power setting wide:1, compandor:1 scrambler:1 @@ -173,14 +195,18 @@ MEM_SIZE = 0x1C00 BLOCK_SIZE = 0x40 STIMEOUT = 2 - LIST_RECVMODE = ["QT/DQT", "QT/DQT + Signaling"] LIST_SIGNAL = ["Off"] + ["DTMF%s" % x for x in range(1, 9)] + \ ["DTMF%s + Identity" % x for x in range(1, 9)] + \ ["Identity code"] # Band Power settings, can be different than channel power LIST_BPOWER = ["Low", "Mid", "High"] # Tri-power models + +# Screen Color Settings +# BJ-218 Colors LIST_COLOR = ["Off", "Orange", "Blue", "Purple"] +# BJ-318 Colors +LIST_COLOR318 = ["Purple", "Red", "Emerald", "Blue", "Sky_Blue", "Black"] LIST_LEDSW = ["Auto", "On"] LIST_RING = ["Off"] + ["%s" % x for x in range(1, 10)] LIST_TDR_DEF = ["A-Upper", "B-Lower"] @@ -206,9 +232,9 @@ SETTING_LISTS = { "init_bank": LIST_TDR_DEF, "tot": LIST_TIMEOUT, - "wtled": LIST_COLOR, - "rxled": LIST_COLOR, - "txled": LIST_COLOR, + "wtled": LIST_COLOR, # not used in BJ-318, other radios use + "rxled": LIST_COLOR, # not used in BJ-318, other radios use + "txled": LIST_COLOR, # not used in BJ-318, other radios use "sig_freq": LIST_SSF, "dtmf_txms": LIST_DTMFTX, "ledsw": LIST_LEDSW, @@ -223,7 +249,9 @@ "shift": LIST_SHIFT, "step": LIST_STEPS, "ring": LIST_RING, - "state_now": LIST_STATE + "state_now": LIST_STATE, + "up_scr_color": LIST_COLOR318, # unique to BJ-318 + "dn_scr_color": LIST_COLOR318, # unique to BJ-318 }

@@ -425,7 +453,14 @@ NAME_LENGTH = 7 DTMF_CHARS = list("0123456789ABCD*#")

- # Channel power: 2 levels + # Channel Power: 2 levels + # BJ-318 uses 3 power levels for each VFO "Band" + # Low = 5W, Med = 10W, High = 25W + # The band power selection in a VFO applies to the VFO and overrides + # the stored channel power selection + # The firmware chanel memory structure provides only 1 bit for + # individual chanel power settings, limiting potential channel + # power selection options to 2 levels: Low or High. POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=5.00), chirp_common.PowerLevel("High", watts=30.00)]

@@ -439,20 +474,39 @@ @classmethod def get_prompts(cls): rp = chirp_common.RadioPrompts() - rp.info = \ - ('Some notes about POWER settings:\n' - '- The individual channel power settings are ignored' - ' by the radio.\n' - ' They are allowed to be set (and downloaded) in hopes of' - ' a future firmware update.\n' - '- Power settings done 'Live' in the radio apply to the' - ' entire upper or lower band.\n' - '- Tri-power radio models will set and download the three' - ' band-power' - ' levels, but they are converted to just Low and High at' - ' upload.' - ' The Mid setting reverts to Low.' - ) + if cls.MODEL == "BJ-318": + msg = \ + (' BJ-318 EXPERIMENTAL\n' + ' PLEASE REPORT ANY ISSUES \n' + '\n' + 'The individual channel power settings are ignored by \n' + 'the radio. They are allowed to be set in hopes of a \n' + 'future firmware change. Changing a stored channel power \n' + 'setting must be done manually using the front panel menu \n' + 'control (or the microphone control controls while in VFO \n' + 'mode) to change the VFO power. The CHIRP driver will \n' + 'allow setting the individual VFO power to High (25W), \n' + 'Med (10W) or Low (5W) and setting the unused individual \n' + 'channel power setting to High (25W) or Low (5W)' + ) + + else: + msg = \ + ('Some notes about POWER settings:\n' + '- The individual channel power settings are ignored' + ' by the radio.\n' + ' They are allowed to be set (and downloaded) in hopes of' + ' a future firmware update.\n' + '- Power settings done 'Live' in the radio apply to the' + ' entire upper or lower band.\n' + '- Tri-power radio models will set and download the three' + ' band-power' + ' levels, but they are converted to just Low and High at' + ' upload.' + ' The Mid setting reverts to Low.' + ) + + rp.info = msg

rp.pre_download = _(dedent("""\ Follow this instructions to download your info: @@ -776,19 +830,25 @@ _sets.init_bank])) basic.append(bnd_mode)

- volume = RadioSetting("settings.volume", "Volume", - RadioSettingValueInteger(0, 20, _sets.volume)) - basic.append(volume) + # BJ-318 set by vfo, skip + if self.MODEL != "BJ-318": + rs = RadioSettingValueInteger(0, 20, _sets.volume) + volume = RadioSetting("settings.volume", "Volume", rs) + basic.append(volume)

- val = _vfoa.bpower # 2bits values 0,1,2= Low, Mid, High - rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[val]) - powera = RadioSetting("upper.vfoa.bpower", "Power (Upper)", rx) - basic.append(powera) + # BJ-318 set by vfo, skip + if self.MODEL != "BJ-318": + vala = _vfoa.bpower # 2bits values 0,1,2= Low, Mid, High + rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[vala]) + powera = RadioSetting("upper.vfoa.bpower", "Power (Upper)", rx) + basic.append(powera)

- val = _vfob.bpower - rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[val]) - powerb = RadioSetting("lower.vfob.bpower", "Power (Lower)", rx) - basic.append(powerb) + # BJ-318 set by vfo, skip + if self.MODEL != "BJ-318": + valb = _vfob.bpower + rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[valb]) + powerb = RadioSetting("lower.vfob.bpower", "Power (Lower)", rx) + basic.append(powerb)

def my_word2raw(setting, obj, atrb, mlt=10): """Callback function to convert UI floating value to u16 int""" @@ -874,28 +934,48 @@ setattr(obj, tone_atr, tonx) return

- val = _sets.fm_freq / 10.0 - if val == 0: - val = 88.9 # 0 is not valid - rx = RadioSettingValueFloat(65, 108.0, val, 0.1, 1) - rs = RadioSetting("settings.fm_freq", "FM Broadcast Freq (MHz)", rx) - rs.set_apply_callback(my_word2raw, _sets, "fm_freq") - basic.append(rs) + # not used by BJ-318 skip + if self.MODEL != "BJ-318": + val = _sets.fm_freq / 10.0 + if val == 0: + val = 88.9 # 0 is not valid + rx = RadioSettingValueFloat(65, 108.0, val, 0.1, 1) + rs = RadioSetting("settings.fm_freq", + "FM Broadcast Freq (MHz)", rx) + rs.set_apply_callback(my_word2raw, _sets, "fm_freq") + basic.append(rs)

- wtled = RadioSetting("settings.wtled", "Standby LED Color", - RadioSettingValueList(LIST_COLOR, LIST_COLOR[ - _sets.wtled])) - basic.append(wtled) + # BJ-318 fm frequency + if self.MODEL == "BJ-318": + val = _lims.fm_318 / 10.0 + if val == 0: + val = 88.9 # 0 is not valid + rx = RadioSettingValueFloat(65, 108.0, val, 0.1, 1) + rs = RadioSetting("hello_lims.fm_318", + "FM Broadcast Freq (MHz)", rx) + rs.set_apply_callback(my_word2raw, _lims, "fm_318") + basic.append(rs)

- rxled = RadioSetting("settings.rxled", "RX LED Color", - RadioSettingValueList(LIST_COLOR, LIST_COLOR[ - _sets.rxled])) - basic.append(rxled) + # not used in BJ-318, skip + if self.MODEL != "BJ-318": + rs = RadioSettingValueList(LIST_COLOR, + LIST_COLOR[_sets.wtled]) + wtled = RadioSetting("settings.wtled", "Standby LED Color", rs) + basic.append(wtled)

- txled = RadioSetting("settings.txled", "TX LED Color", - RadioSettingValueList(LIST_COLOR, LIST_COLOR[ - _sets.txled])) - basic.append(txled) + # not used in BJ-318, skip + if self.MODEL != "BJ-318": + rs = RadioSettingValueList(LIST_COLOR, + LIST_COLOR[_sets.rxled]) + rxled = RadioSetting("settings.rxled", "RX LED Color", rs) + basic.append(rxled) + + # not used in BJ-318, skip + if self.MODEL != "BJ-318": + rs = RadioSettingValueList(LIST_COLOR, + LIST_COLOR[_sets.txled]) + txled = RadioSetting("settings.txled", "TX LED Color", rs) + basic.append(txled)

ledsw = RadioSetting("settings.ledsw", "Back light mode", RadioSettingValueList(LIST_LEDSW, LIST_LEDSW[ @@ -915,21 +995,24 @@ RadioSettingValueBoolean(bool(_sets.bcl))) basic.append(bcl)

- if _vfoa.sql == 0xFF: - val = 0x04 - else: - val = _vfoa.sql - sqla = RadioSetting("upper.vfoa.sql", "Squelch (Upper)", - RadioSettingValueInteger(0, 9, val)) - basic.append(sqla) + # squelch for non-BJ-318 models + # BJ-318 squelch set by VFO basis + if self.MODEL != "BJ-318": + if _vfoa.sql == 0xFF: + val = 0x04 + else: + val = _vfoa.sql + sqla = RadioSetting("upper.vfoa.sql", "Squelch (Upper)", + RadioSettingValueInteger(0, 9, val)) + basic.append(sqla)

- if _vfob.sql == 0xFF: - val = 0x04 - else: - val = _vfob.sql - sqlb = RadioSetting("lower.vfob.sql", "Squelch (Lower)", - RadioSettingValueInteger(0, 9, val)) - basic.append(sqlb) + if _vfob.sql == 0xFF: + val = 0x04 + else: + val = _vfob.sql + sqlb = RadioSetting("lower.vfob.sql", "Squelch (Lower)", + RadioSettingValueInteger(0, 9, val)) + basic.append(sqlb)

tmp = str(int(_sets.tot) * 30) # 30 sec step counter rs = RadioSetting("settings.tot", "Transmit Timeout (Secs)", @@ -1034,6 +1117,38 @@ rs.set_apply_callback(my_word2raw, _vfoa, "step", 100) a_band.append(rs)

+ # BJ-318 upper band squelch + if self.MODEL == "BJ-318": + if _vfoa.sql == 0xFF: + valq = 0x04 # setting default squelch to 04 + else: + valq = _vfoa.sql + sqla = RadioSetting("upper.vfoa.sql", "Squelch", + RadioSettingValueInteger(0, 9, valq)) + a_band.append(sqla) + + # BJ-318 upper band volume + if self.MODEL == "BJ-318": + bvolume_u = RadioSetting("upper.vfoa.bvol", + "Volume", RadioSettingValueInteger( + 0, 10, _vfoa.bvol)) + a_band.append(bvolume_u) + + # BJ-318 Upper Screen Color + if self.MODEL == "BJ-318": + rs_u = RadioSettingValueList(LIST_COLOR318, + LIST_COLOR318[_lims.up_scr_color]) + up_scr_color = RadioSetting("hello_lims.up_scr_color", + "Screen Color", rs_u) + a_band.append(up_scr_color) + + # BJ-318 Upper band power + if self.MODEL == "BJ-318": + val_b = _vfoa.bpower # 2bits values 0,1,2= Low, Mid, High + rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[val_b]) + power_u = RadioSetting("upper.vfoa.bpower", "Power", rx) + a_band.append(power_u) + # LOWER BAND SETTINGS

val = _vfob.frq_chn_mode / 2 @@ -1110,8 +1225,39 @@ rs.set_apply_callback(my_word2raw, _vfob, "step", 100) b_band.append(rs)

+ # BJ-318 lower band squelch + if self.MODEL == "BJ-318": + if _vfob.sql == 0xFF: + val_l = 0x04 # setting default squelch to 04 + else: + val_l = _vfob.sql + sql_b = RadioSetting("lower.vfob.sql", "Squelch", + RadioSettingValueInteger(0, 9, val_l)) + b_band.append(sql_b) + + # BJ-318 lower band volume + if self.MODEL == "BJ-318": + bvolume_l = RadioSetting("lower.vfob.bvol", + "Volume", RadioSettingValueInteger( + 0, 10, _vfob.bvol)) + b_band.append(bvolume_l) + + # BJ-318 Lower Screen Color + if self.MODEL == "BJ-318": + rs_l = RadioSettingValueList(LIST_COLOR318, + LIST_COLOR318[_lims.dn_scr_color]) + dn_scr_color = RadioSetting("hello_lims.dn_scr_color", + "Screen Color", rs_l) + b_band.append(dn_scr_color) + + # BJ-318 lower band power + if self.MODEL == "BJ-318": + val_l = _vfoa.bpower # 2bits values 0,1,2= Low, Mid, High + rx = RadioSettingValueList(LIST_BPOWER, LIST_BPOWER[val_l]) + powera = RadioSetting("lower.vfob.bpower", "Power", rx) + b_band.append(powera) + # PowerOn & Freq Limits Settings - def chars2str(cary, knt): """Convert raw memory char array to a string: NOT a callback.""" stx = "" @@ -1137,17 +1283,21 @@ setattr(obj, atrbc, knt) return

- tmp = chars2str(_lims.hello1, _lims.hello1_cnt) - rs = RadioSetting("hello_lims.hello1", "Power-On Message 1", - RadioSettingValueString(0, 7, tmp)) - rs.set_apply_callback(my_str2ary, _lims, "hello1", "hello1_cnt") - lims.append(rs) + # not used in BJ-318 startup screen + if self.MODEL != "BJ-318": + tmp = chars2str(_lims.hello1, _lims.hello1_cnt) + rs = RadioSetting("hello_lims.hello1", "Power-On Message 1", + RadioSettingValueString(0, 7, tmp)) + rs.set_apply_callback(my_str2ary, _lims, "hello1", "hello1_cnt") + lims.append(rs)

- tmp = chars2str(_lims.hello2, _lims.hello2_cnt) - rs = RadioSetting("hello_lims.hello2", "Power-On Message 2", - RadioSettingValueString(0, 7, tmp)) - rs.set_apply_callback(my_str2ary, _lims, "hello2", "hello2_cnt") - lims.append(rs) + # not used in BJ-318 startup screen + if self.MODEL != "BJ-318": + tmp = chars2str(_lims.hello2, _lims.hello2_cnt) + rs = RadioSetting("hello_lims.hello2", "Power-On Message 2", + RadioSettingValueString(0, 7, tmp)) + rs.set_apply_callback(my_str2ary, _lims, "hello2", "hello2_cnt") + lims.append(rs)

# VALID_BANDS = [(136000000, 176000000),400000000, 480000000)]

@@ -1460,3 +1610,23 @@

def get_sub_devices(self): return [Baojie218Upper(self._mmap), Baojie218Lower(self._mmap)] + + +class Baojie318Upper(LT725UVUpper): + VENDOR = "Baojie" + MODEL = "BJ-318" + + +class Baojie318Lower(LT725UVLower): + VENDOR = "Baojie" + MODEL = "BJ-318" + + +@directory.register +class Baojie318(LT725UV): + """Baojie BJ-318""" + VENDOR = "Baojie" + MODEL = "BJ-318" + + def get_sub_devices(self): + return [Baojie318Upper(self._mmap), Baojie318Lower(self._mmap)]