Tested changes:

Changes for Build #920 [Dan Smith dsmith@danplanet.com] Fix GA510 DTCS codes missing 654

This was causing an off-by-one error in the higher codes.

Fixes #9143

[Tom Hayward tom@tomh.us] [id880] Fix typo in charset definition. #281

[Tom Hayward tom@tomh.us] [thf6a] Support full charset (ASCII). Fixes #141

[Tom Hayward tom@tomh.us] [id880] Support full charset. Fixes #281

[Tom Hayward tom@tomh.us] [vx5] Support full charset (ASCII). Fixes #292

[Tom Hayward tom@tomh.us] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269

[Tom Hayward tom@tomh.us] Support PyGTK < 2.22 in bank edit. Fixes #231

[Tom Hayward tom@tomh.us] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212

[Dan Smith dsmith@danplanet.com] [vx7] Fix setting memory power levels on 220MHz band Fixes #214

[Dan Smith dsmith@danplanet.com] fips: Pennsylvania FIPS code was wrong. #117

[Marco Filippi iz3gme.marco@gmail.com] Consider lower bound frequency of each valid_band as valid Fix bug #181

[Tom Hayward tom@tomh.us] tmd700: allow 8-char names. Fixes #176

[Dan Smith dsmith@danplanet.com] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172

[David Griffith dave@661.org] Bug #155 fix: VX-7 1.25m power levels

[David Griffith dave@661.org] New INSTALL and README files Fixes #122

[Tom Hayward tom@tomh.us] thd72: only use hardware flow on OS X. Fixes #166

[Marco Filippi iz3gme.marco@gmail.com] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163

[Tom Hayward tom@tomh.us] Fix Mac .app so paths with spaces work. Fixes Bug #145

Full log:

[...truncated 841 lines...] test_copy_all (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R copy all ... ok test_detect (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R detect ... ok test_edges (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R edges ... ok test_settings (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R settings ... ok test_banks (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) brute force ... ok test_clone (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) clone ... ok test_copy_all (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) copy all ... ok test_detect (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) detect ... ok test_edges (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) edges ... ok test_settings (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) settings ... ok test_banks (tests.TestCase_IcomICW32A) Testing Icom IC-W32A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICW32A) Testing Icom IC-W32A brute force ... ok test_clone (tests.TestCase_IcomICW32A) Testing Icom IC-W32A clone ... ok test_copy_all (tests.TestCase_IcomICW32A) Testing Icom IC-W32A copy all ... ok test_detect (tests.TestCase_IcomICW32A) Testing Icom IC-W32A detect ... ok test_edges (tests.TestCase_IcomICW32A) Testing Icom IC-W32A edges ... ok test_settings (tests.TestCase_IcomICW32A) Testing Icom IC-W32A settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT7100M) Testing Yaesu FT-7100M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT7100M) Testing Yaesu FT-7100M brute force ... ok test_clone (tests.TestCase_YaesuFT7100M) Testing Yaesu FT-7100M clone ... ok test_copy_all (tests.TestCase_YaesuFT7100M) Testing Yaesu FT-7100M copy all ... ok test_detect (tests.TestCase_YaesuFT7100M) Testing Yaesu FT-7100M detect ... ok test_edges (tests.TestCase_YaesuFT7100M) Testing Yaesu FT-7100M edges ... ok test_settings (tests.TestCase_YaesuFT7100M) Testing Yaesu FT-7100M settings ... ok test_banks (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus brute force ... ok test_clone (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus clone ... ok test_copy_all (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus copy all ... ok test_detect (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus detect ... ok test_edges (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus edges ... ok test_settings (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus settings ... ok test_banks (tests.TestCase_QYTKT7900D) Testing QYT KT7900D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_QYTKT7900D) Testing QYT KT7900D brute force ... ok test_clone (tests.TestCase_QYTKT7900D) Testing QYT KT7900D clone ... ok test_copy_all (tests.TestCase_QYTKT7900D) Testing QYT KT7900D copy all ... ok test_detect (tests.TestCase_QYTKT7900D) Testing QYT KT7900D detect ... ok test_edges (tests.TestCase_QYTKT7900D) Testing QYT KT7900D edges ... ok test_settings (tests.TestCase_QYTKT7900D) Testing QYT KT7900D settings ... ok test_banks (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 banks ... ok test_brute_force (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 brute force ... ok test_clone (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 clone ... ok test_copy_all (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 copy all ... ok test_detect (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 detect ... ok test_edges (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 edges ... ok test_settings (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 settings ... ok test_banks (tests.TestCase_RetevisRT622) Testing Retevis RT622 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT622) Testing Retevis RT622 brute force ... ok test_clone (tests.TestCase_RetevisRT622) Testing Retevis RT622 clone ... ok test_copy_all (tests.TestCase_RetevisRT622) Testing Retevis RT622 copy all ... ok test_detect (tests.TestCase_RetevisRT622) Testing Retevis RT622 detect ... ok test_edges (tests.TestCase_RetevisRT622) Testing Retevis RT622 edges ... ok test_settings (tests.TestCase_RetevisRT622) Testing Retevis RT622 settings ... ok test_banks (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R brute force ... ok test_clone (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R clone ... ok test_copy_all (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R copy all ... ok test_detect (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R detect ... ok test_edges (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R edges ... ok test_settings (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R settings ... ok test_banks (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 brute force ... ok test_clone (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 clone ... ok test_copy_all (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 copy all ... ok test_detect (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 detect ... ok test_edges (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 settings ... ok test_banks (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 banks ... ok test_brute_force (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 brute force ... ok test_clone (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 clone ... ok test_copy_all (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 copy all ... ok test_detect (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 detect ... ok test_edges (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 edges ... ok test_settings (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 settings ... ok test_banks (tests.TestCase_IcomICW32E) Testing Icom IC-W32E banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICW32E) Testing Icom IC-W32E brute force ... ok test_clone (tests.TestCase_IcomICW32E) Testing Icom IC-W32E clone ... ok test_copy_all (tests.TestCase_IcomICW32E) Testing Icom IC-W32E copy all ... ok test_detect (tests.TestCase_IcomICW32E) Testing Icom IC-W32E detect ... ok test_edges (tests.TestCase_IcomICW32E) Testing Icom IC-W32E edges ... ok test_settings (tests.TestCase_IcomICW32E) Testing Icom IC-W32E settings ... skipped 'Settings not supported' test_banks (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G banks ... ok test_brute_force (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G brute force ... ok test_clone (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G clone ... ok test_copy_all (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G copy all ... ok test_detect (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G detect ... ok test_edges (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G edges ... ok test_settings (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G settings ... ok test_banks (tests.TestCase_RetevisRT76) Testing Retevis RT76 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT76) Testing Retevis RT76 brute force ... ok test_clone (tests.TestCase_RetevisRT76) Testing Retevis RT76 clone ... ok test_copy_all (tests.TestCase_RetevisRT76) Testing Retevis RT76 copy all ... ok test_detect (tests.TestCase_RetevisRT76) Testing Retevis RT76 detect ... ok test_edges (tests.TestCase_RetevisRT76) Testing Retevis RT76 edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_RetevisRT76) Testing Retevis RT76 settings ... ok test_banks (tests.TestCase_WouxunKGUV8E) Testing Wouxun KG-UV8E banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV8E) Testing Wouxun KG-UV8E brute force ... ok test_clone (tests.TestCase_WouxunKGUV8E) Testing Wouxun KG-UV8E clone ... ok test_copy_all (tests.TestCase_WouxunKGUV8E) Testing Wouxun KG-UV8E copy all ... ok test_detect (tests.TestCase_WouxunKGUV8E) Testing Wouxun KG-UV8E detect ... ok test_edges (tests.TestCase_WouxunKGUV8E) Testing Wouxun KG-UV8E edges ... ok test_settings (tests.TestCase_WouxunKGUV8E) Testing Wouxun KG-UV8E settings ... ok test_banks (tests.TestCase_QYTKT8900D) Testing QYT KT8900D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_QYTKT8900D) Testing QYT KT8900D brute force ... ok test_clone (tests.TestCase_QYTKT8900D) Testing QYT KT8900D clone ... ok test_copy_all (tests.TestCase_QYTKT8900D) Testing QYT KT8900D copy all ... ok test_detect (tests.TestCase_QYTKT8900D) Testing QYT KT8900D detect ... ok test_edges (tests.TestCase_QYTKT8900D) Testing QYT KT8900D edges ... ok test_settings (tests.TestCase_QYTKT8900D) Testing QYT KT8900D settings ... ok test_banks (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 banks ... ok test_brute_force (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 brute force ... ok test_clone (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 clone ... ok test_copy_all (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 copy all ... ok test_detect (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 detect ... ok test_edges (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 edges ... ok test_settings (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 settings ... ok test_banks (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 brute force ... ok test_clone (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 clone ... ok test_copy_all (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 copy all ... ok test_detect (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 detect ... ok test_edges (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 edges ... ok test_settings (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 settings ... ok test_banks (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 brute force ... ok test_clone (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 clone ... ok test_copy_all (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 copy all ... ok test_detect (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 detect ... ok test_edges (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 edges ... ok test_settings (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 settings ... ok test_banks (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 brute force ... ok test_clone (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 clone ... ok test_copy_all (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 copy all ... ok test_detect (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 detect ... ok test_edges (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 edges ... ok test_settings (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 settings ... ok test_banks (tests.TestCase_RetevisRT95) Testing Retevis RT95 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT95) Testing Retevis RT95 brute force ... ok test_clone (tests.TestCase_RetevisRT95) Testing Retevis RT95 clone ... ok test_copy_all (tests.TestCase_RetevisRT95) Testing Retevis RT95 copy all ... ok test_detect (tests.TestCase_RetevisRT95) Testing Retevis RT95 detect ... ok test_edges (tests.TestCase_RetevisRT95) Testing Retevis RT95 edges ... ok test_settings (tests.TestCase_RetevisRT95) Testing Retevis RT95 settings ... ok test_banks (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND brute force ... ok test_clone (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND clone ... ok test_copy_all (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND copy all ... ok test_detect (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND detect ... ok test_edges (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND edges ... ok test_settings (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND settings ... ok test_banks (tests.TestCase_KenwoodTK3180K2) Testing Kenwood TK-3180K2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTK3180K2) Testing Kenwood TK-3180K2 brute force ... ok test_clone (tests.TestCase_KenwoodTK3180K2) Testing Kenwood TK-3180K2 clone ... ok test_copy_all (tests.TestCase_KenwoodTK3180K2) Testing Kenwood TK-3180K2 copy all ... ok test_detect (tests.TestCase_KenwoodTK3180K2) Testing Kenwood TK-3180K2 detect ... ok test_edges (tests.TestCase_KenwoodTK3180K2) Testing Kenwood TK-3180K2 edges ... ok test_settings (tests.TestCase_KenwoodTK3180K2) Testing Kenwood TK-3180K2 settings ... ok test_banks (tests.TestCase_RadioddityGA510) Testing Radioddity GA-510 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RadioddityGA510) Testing Radioddity GA-510 brute force ... ok test_clone (tests.TestCase_RadioddityGA510) Testing Radioddity GA-510 clone ... ok test_copy_all (tests.TestCase_RadioddityGA510) Testing Radioddity GA-510 copy all ... ok test_detect (tests.TestCase_RadioddityGA510) Testing Radioddity GA-510 detect ... ok test_edges (tests.TestCase_RadioddityGA510) Testing Radioddity GA-510 edges ... ok test_settings (tests.TestCase_RadioddityGA510) Testing Radioddity GA-510 settings ... ok test_banks (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus brute force ... ok test_clone (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus clone ... ok test_copy_all (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus copy all ... ok test_detect (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus detect ... ok test_edges (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus edges ... ok test_settings (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus settings ... ok test_banks (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 banks ... ok test_brute_force (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 brute force ... ok test_clone (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 clone ... ok test_copy_all (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 copy all ... ok test_detect (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 detect ... ok test_edges (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 edges ... ok test_settings (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID31A) Testing Icom ID-31A banks ... ok test_brute_force (tests.TestCase_IcomID31A) Testing Icom ID-31A brute force ... ok test_clone (tests.TestCase_IcomID31A) Testing Icom ID-31A clone ... ok test_copy_all (tests.TestCase_IcomID31A) Testing Icom ID-31A copy all ... ok test_detect (tests.TestCase_IcomID31A) Testing Icom ID-31A detect ... ok test_edges (tests.TestCase_IcomID31A) Testing Icom ID-31A edges ... ok test_settings (tests.TestCase_IcomID31A) Testing Icom ID-31A settings ... ok test_banks (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 brute force ... ok test_clone (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 clone ... ok test_copy_all (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 copy all ... ok test_detect (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 detect ... ok test_edges (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 edges ... ok test_settings (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 brute force ... ok test_clone (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 clone ... ok test_copy_all (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 copy all ... ok test_detect (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 detect ... ok test_edges (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 edges ... ok test_settings (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 settings ... ok test_banks (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) brute force ... ok test_clone (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) clone ... ok test_copy_all (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) copy all ... ok test_detect (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) detect ... ok test_edges (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) edges ... ok test_settings (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) settings ... ok test_banks (tests.TestCase_RuggedRH5RV2) Testing Rugged RH5R-V2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RuggedRH5RV2) Testing Rugged RH5R-V2 brute force ... ok test_clone (tests.TestCase_RuggedRH5RV2) Testing Rugged RH5R-V2 clone ... ok test_copy_all (tests.TestCase_RuggedRH5RV2) Testing Rugged RH5R-V2 copy all ... ok test_detect (tests.TestCase_RuggedRH5RV2) Testing Rugged RH5R-V2 detect ... ok test_edges (tests.TestCase_RuggedRH5RV2) Testing Rugged RH5R-V2 edges ... ok test_settings (tests.TestCase_RuggedRH5RV2) Testing Rugged RH5R-V2 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_RadioddityR2) Testing Radioddity R2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RadioddityR2) Testing Radioddity R2 brute force ... ok test_clone (tests.TestCase_RadioddityR2) Testing Radioddity R2 clone ... ok test_copy_all (tests.TestCase_RadioddityR2) Testing Radioddity R2 copy all ... ok test_detect (tests.TestCase_RadioddityR2) Testing Radioddity R2 detect ... ok test_edges (tests.TestCase_RadioddityR2) Testing Radioddity R2 edges ... ok test_settings (tests.TestCase_RadioddityR2) Testing Radioddity R2 settings ... ok test_banks (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P brute force ... ok test_clone (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P clone ... ok test_copy_all (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P copy all ... ok test_detect (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P detect ... ok test_edges (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P edges ... ok test_settings (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P settings ... ok test_banks (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G banks ... ok test_brute_force (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G brute force ... ok test_clone (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G clone ... ok test_copy_all (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G copy all ... ok test_detect (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G detect ... ok test_edges (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G edges ... ok test_settings (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G settings ... ok test_banks (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus brute force ... ok test_clone (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus clone ... ok test_copy_all (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus copy all ... ok test_detect (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus detect ... ok test_edges (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus edges ... ok test_settings (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus settings ... ok test_banks (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 brute force ... ok test_clone (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 clone ... ok test_copy_all (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 copy all ... ok test_detect (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 detect ... ok test_edges (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 edges ... ok test_settings (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 settings ... ok test_banks (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 banks ... ok test_brute_force (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 brute force ... ok test_clone (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 clone ... ok test_copy_all (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 copy all ... ok test_detect (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 detect ... ok test_edges (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 edges ... ok test_settings (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 settings ... ok test_banks (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A brute force ... ok test_clone (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A clone ... ok test_copy_all (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A copy all ... ok test_detect (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A detect ... ok test_edges (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A edges ... ok test_settings (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A settings ... ok test_banks (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 brute force ... ok test_clone (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 clone ... ok test_copy_all (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 copy all ... ok test_detect (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 detect ... ok test_edges (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 edges ... ok test_settings (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 settings ... ok test_banks (tests.TestCase_RadtelT18) Testing Radtel T18 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RadtelT18) Testing Radtel T18 brute force ... ok test_clone (tests.TestCase_RadtelT18) Testing Radtel T18 clone ... ok test_copy_all (tests.TestCase_RadtelT18) Testing Radtel T18 copy all ... ok test_detect (tests.TestCase_RadtelT18) Testing Radtel T18 detect ... ok test_edges (tests.TestCase_RadtelT18) Testing Radtel T18 edges ... ok test_settings (tests.TestCase_RadtelT18) Testing Radtel T18 settings ... ok test_banks (tests.TestCase_YaesuFT1500M) Testing Yaesu FT-1500M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT1500M) Testing Yaesu FT-1500M brute force ... ok test_clone (tests.TestCase_YaesuFT1500M) Testing Yaesu FT-1500M clone ... ok test_copy_all (tests.TestCase_YaesuFT1500M) Testing Yaesu FT-1500M copy all ... ok test_detect (tests.TestCase_YaesuFT1500M) Testing Yaesu FT-1500M detect ... ok test_edges (tests.TestCase_YaesuFT1500M) Testing Yaesu FT-1500M edges ... ok test_settings (tests.TestCase_YaesuFT1500M) Testing Yaesu FT-1500M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 brute force ... ok test_clone (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 clone ... ok test_copy_all (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 copy all ... ok test_detect (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 detect ... ok test_edges (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 edges ... ok test_settings (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 settings ... ok test_banks (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 brute force ... ok test_clone (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 clone ... ok test_copy_all (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 copy all ... ok test_detect (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 detect ... ok test_edges (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 edges ... ok test_settings (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 settings ... ok test_banks (tests.TestCase_CRTMicronUV) Testing CRT Micron UV banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_CRTMicronUV) Testing CRT Micron UV brute force ... ok test_clone (tests.TestCase_CRTMicronUV) Testing CRT Micron UV clone ... ok test_copy_all (tests.TestCase_CRTMicronUV) Testing CRT Micron UV copy all ... ok test_detect (tests.TestCase_CRTMicronUV) Testing CRT Micron UV detect ... ok test_edges (tests.TestCase_CRTMicronUV) Testing CRT Micron UV edges ... ok test_settings (tests.TestCase_CRTMicronUV) Testing CRT Micron UV settings ... ok test_banks (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 banks ... ok test_brute_force (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 brute force ... ok test_clone (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 clone ... ok test_copy_all (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 copy all ... ok test_detect (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 detect ... ok test_edges (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 edges ... ok test_settings (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTH350) Testing TYT TH-350 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH350) Testing TYT TH-350 brute force ... ok test_clone (tests.TestCase_TYTTH350) Testing TYT TH-350 clone ... ok test_copy_all (tests.TestCase_TYTTH350) Testing TYT TH-350 copy all ... ok test_detect (tests.TestCase_TYTTH350) Testing TYT TH-350 detect ... ok test_edges (tests.TestCase_TYTTH350) Testing TYT TH-350 edges ... ok test_settings (tests.TestCase_TYTTH350) Testing TYT TH-350 settings ... ok test_banks (tests.TestCase_IcomID51) Testing Icom ID-51 banks ... ok test_brute_force (tests.TestCase_IcomID51) Testing Icom ID-51 brute force ... ok test_clone (tests.TestCase_IcomID51) Testing Icom ID-51 clone ... ok test_copy_all (tests.TestCase_IcomID51) Testing Icom ID-51 copy all ... ok test_detect (tests.TestCase_IcomID51) Testing Icom ID-51 detect ... ok test_edges (tests.TestCase_IcomID51) Testing Icom ID-51 edges ... ok test_settings (tests.TestCase_IcomID51) Testing Icom ID-51 settings ... ok test_banks (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 brute force ... ok test_clone (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 clone ... ok test_copy_all (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 copy all ... ok test_detect (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 detect ... ok test_edges (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 edges ... ok test_settings (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 settings ... ok test_banks (tests.TestCase_RetevisRB17A) Testing Retevis RB17A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRB17A) Testing Retevis RB17A brute force ... ok test_clone (tests.TestCase_RetevisRB17A) Testing Retevis RB17A clone ... ok test_copy_all (tests.TestCase_RetevisRB17A) Testing Retevis RB17A copy all ... ok test_detect (tests.TestCase_RetevisRB17A) Testing Retevis RB17A detect ... ok test_edges (tests.TestCase_RetevisRB17A) Testing Retevis RB17A edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_RetevisRB17A) Testing Retevis RB17A settings ... ok test_banks (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) brute force ... ok test_clone (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) clone ... ok test_copy_all (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) copy all ... ok test_detect (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) detect ... ok test_edges (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) edges ... ok test_settings (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) settings ... ok test_banks (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M brute force ... ok test_clone (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M clone ... ok test_copy_all (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M copy all ... ok test_detect (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M detect ... ok test_edges (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M edges ... ok test_settings (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A brute force ... ok test_clone (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A clone ... ok test_copy_all (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A copy all ... ok test_detect (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A detect ... ok test_edges (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A edges ... ok test_settings (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A settings ... ok test_banks (tests.TestCase_KenwoodTK8180) Testing Kenwood TK-8180 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTK8180) Testing Kenwood TK-8180 brute force ... ok test_clone (tests.TestCase_KenwoodTK8180) Testing Kenwood TK-8180 clone ... ok test_copy_all (tests.TestCase_KenwoodTK8180) Testing Kenwood TK-8180 copy all ... ok test_detect (tests.TestCase_KenwoodTK8180) Testing Kenwood TK-8180 detect ... ok test_edges (tests.TestCase_KenwoodTK8180) Testing Kenwood TK-8180 edges ... ok test_settings (tests.TestCase_KenwoodTK8180) Testing Kenwood TK-8180 settings ... ok test_banks (tests.TestCase_RetevisRB26) Testing Retevis RB26 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRB26) Testing Retevis RB26 brute force ... ok test_clone (tests.TestCase_RetevisRB26) Testing Retevis RB26 clone ... ok test_copy_all (tests.TestCase_RetevisRB26) Testing Retevis RB26 copy all ... ok test_detect (tests.TestCase_RetevisRB26) Testing Retevis RB26 detect ... ok test_edges (tests.TestCase_RetevisRB26) Testing Retevis RB26 edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_RetevisRB26) Testing Retevis RB26 settings ... ok test_banks (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 banks ... ok test_brute_force (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 brute force ... ok test_clone (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 clone ... ok test_copy_all (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 copy all ... ok test_detect (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 detect ... ok test_edges (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 edges ... ok test_settings (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 brute force ... ok test_clone (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 clone ... ok test_copy_all (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 copy all ... ok test_detect (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 detect ... ok test_edges (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 edges ... ok test_settings (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 settings ... ok test_banks (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR banks ... ok test_brute_force (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR brute force ... ok test_clone (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR clone ... ok test_copy_all (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR copy all ... ok test_detect (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR detect ... ok test_edges (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR edges ... ok test_settings (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR settings ... ok test_banks (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B brute force ... ok test_clone (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B clone ... ok test_copy_all (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B copy all ... ok test_detect (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B detect ... ok test_edges (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B edges ... ok test_settings (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B settings ... ok test_banks (tests.TestCase_TYTTH7800) Testing TYT TH-7800 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH7800) Testing TYT TH-7800 brute force ... ok test_clone (tests.TestCase_TYTTH7800) Testing TYT TH-7800 clone ... ok test_copy_all (tests.TestCase_TYTTH7800) Testing TYT TH-7800 copy all ... ok test_detect (tests.TestCase_TYTTH7800) Testing TYT TH-7800 detect ... ok test_edges (tests.TestCase_TYTTH7800) Testing TYT TH-7800 edges ... ok test_settings (tests.TestCase_TYTTH7800) Testing TYT TH-7800 settings ... ok test_banks (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus banks ... ok test_brute_force (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus brute force ... ok test_clone (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus clone ... ok test_copy_all (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus copy all ... ok test_detect (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus detect ... ok test_edges (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus edges ... ok test_settings (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus settings ... ok test_banks (tests.TestCase_RetevisRT1) Testing Retevis RT1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT1) Testing Retevis RT1 brute force ... ok test_clone (tests.TestCase_RetevisRT1) Testing Retevis RT1 clone ... ok test_copy_all (tests.TestCase_RetevisRT1) Testing Retevis RT1 copy all ... ok test_detect (tests.TestCase_RetevisRT1) Testing Retevis RT1 detect ... ok test_edges (tests.TestCase_RetevisRT1) Testing Retevis RT1 edges ... ok test_settings (tests.TestCase_RetevisRT1) Testing Retevis RT1 settings ... ok test_banks (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 brute force ... ok test_clone (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 clone ... ok test_copy_all (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 copy all ... ok test_detect (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 detect ... ok test_edges (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 edges ... ok test_settings (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_KenwoodTMD710GCloneMode) Testing Kenwood TM-D710G_CloneMode banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTMD710GCloneMode) Testing Kenwood TM-D710G_CloneMode brute force ... ok test_clone (tests.TestCase_KenwoodTMD710GCloneMode) Testing Kenwood TM-D710G_CloneMode clone ... ok test_copy_all (tests.TestCase_KenwoodTMD710GCloneMode) Testing Kenwood TM-D710G_CloneMode copy all ... ok test_detect (tests.TestCase_KenwoodTMD710GCloneMode) Testing Kenwood TM-D710G_CloneMode detect ... ok test_edges (tests.TestCase_KenwoodTMD710GCloneMode) Testing Kenwood TM-D710G_CloneMode edges ... ok test_settings (tests.TestCase_KenwoodTMD710GCloneMode) Testing Kenwood TM-D710G_CloneMode settings ... ok test_banks (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B brute force ... ok test_clone (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B clone ... ok test_copy_all (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B copy all ... ok test_detect (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B detect ... ok test_edges (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B edges ... ok test_settings (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B settings ... ok test_banks (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D banks ... ok test_brute_force (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D brute force ... ok test_clone (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D clone ... ok test_copy_all (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D copy all ... ok test_detect (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D detect ... ok test_edges (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D edges ... ok test_settings (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D settings ... ok test_banks (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 brute force ... ok test_clone (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 clone ... ok test_copy_all (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 copy all ... ok test_detect (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 detect ... ok test_edges (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 edges ... ok test_settings (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 settings ... ok test_banks (tests.TestCase_RetevisRT16) Testing Retevis RT16 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT16) Testing Retevis RT16 brute force ... ok test_clone (tests.TestCase_RetevisRT16) Testing Retevis RT16 clone ... ok test_copy_all (tests.TestCase_RetevisRT16) Testing Retevis RT16 copy all ... ok test_detect (tests.TestCase_RetevisRT16) Testing Retevis RT16 detect ... ok test_edges (tests.TestCase_RetevisRT16) Testing Retevis RT16 edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_RetevisRT16) Testing Retevis RT16 settings ... ok test_banks (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE banks ... ok test_brute_force (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE brute force ... ok test_clone (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE clone ... ok test_copy_all (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE copy all ... ok test_detect (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE detect ... ok test_edges (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE edges ... ok test_settings (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE settings ... ok test_banks (tests.TestCase_TYTTH9800) Testing TYT TH-9800 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH9800) Testing TYT TH-9800 brute force ... ok test_clone (tests.TestCase_TYTTH9800) Testing TYT TH-9800 clone ... ok test_copy_all (tests.TestCase_TYTTH9800) Testing TYT TH-9800 copy all ... ok test_detect (tests.TestCase_TYTTH9800) Testing TYT TH-9800 detect ... ok test_edges (tests.TestCase_TYTTH9800) Testing TYT TH-9800 edges ... ok test_settings (tests.TestCase_TYTTH9800) Testing TYT TH-9800 settings ... ok test_banks (tests.TestCase_IcomID800H) Testing Icom ID-800H banks ... ok test_brute_force (tests.TestCase_IcomID800H) Testing Icom ID-800H brute force ... ok test_clone (tests.TestCase_IcomID800H) Testing Icom ID-800H clone ... ok test_copy_all (tests.TestCase_IcomID800H) Testing Icom ID-800H copy all ... ok test_detect (tests.TestCase_IcomID800H) Testing Icom ID-800H detect ... ok test_edges (tests.TestCase_IcomID800H) Testing Icom ID-800H edges ... ok test_settings (tests.TestCase_IcomID800H) Testing Icom ID-800H settings ... ok test_banks (tests.TestCase_KenwoodTMD710CloneMode) Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTMD710CloneMode) Testing Kenwood TM-D710_CloneMode brute force ... ok test_clone (tests.TestCase_KenwoodTMD710CloneMode) Testing Kenwood TM-D710_CloneMode clone ... ok test_copy_all (tests.TestCase_KenwoodTMD710CloneMode) Testing Kenwood TM-D710_CloneMode copy all ... ok test_detect (tests.TestCase_KenwoodTMD710CloneMode) Testing Kenwood TM-D710_CloneMode detect ... ok test_edges (tests.TestCase_KenwoodTMD710CloneMode) Testing Kenwood TM-D710_CloneMode edges ... ok test_settings (tests.TestCase_KenwoodTMD710CloneMode) Testing Kenwood TM-D710_CloneMode settings ... ok test_banks (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D banks ... ok test_brute_force (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D brute force ... ok test_clone (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D clone ... ok test_copy_all (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D copy all ... ok test_detect (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D detect ... ok test_edges (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D edges ... ok test_settings (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D settings ... ok test_banks (tests.TestCase_IcomIC208H) Testing Icom IC-208H banks ... ok test_brute_force (tests.TestCase_IcomIC208H) Testing Icom IC-208H brute force ... ok test_clone (tests.TestCase_IcomIC208H) Testing Icom IC-208H clone ... ok test_copy_all (tests.TestCase_IcomIC208H) Testing Icom IC-208H copy all ... ok test_detect (tests.TestCase_IcomIC208H) Testing Icom IC-208H detect ... ok test_edges (tests.TestCase_IcomIC208H) Testing Icom IC-208H edges ... ok test_settings (tests.TestCase_IcomIC208H) Testing Icom IC-208H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 brute force ... ok test_clone (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 clone ... ok test_copy_all (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 copy all ... ok test_detect (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 detect ... ok test_edges (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 edges ... ok test_settings (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 settings ... ok test_banks (tests.TestCase_YaesuFT25R) Testing Yaesu FT-25R banks ... ok test_brute_force (tests.TestCase_YaesuFT25R) Testing Yaesu FT-25R brute force ... ok test_clone (tests.TestCase_YaesuFT25R) Testing Yaesu FT-25R clone ... ok test_copy_all (tests.TestCase_YaesuFT25R) Testing Yaesu FT-25R copy all ... ok test_detect (tests.TestCase_YaesuFT25R) Testing Yaesu FT-25R detect ... ok test_edges (tests.TestCase_YaesuFT25R) Testing Yaesu FT-25R edges ... ok test_settings (tests.TestCase_YaesuFT25R) Testing Yaesu FT-25R settings ... ok test_banks (tests.TestCase_RetevisRT21) Testing Retevis RT21 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT21) Testing Retevis RT21 brute force ... ok test_clone (tests.TestCase_RetevisRT21) Testing Retevis RT21 clone ... ok test_copy_all (tests.TestCase_RetevisRT21) Testing Retevis RT21 copy all ... ok test_detect (tests.TestCase_RetevisRT21) Testing Retevis RT21 detect ... ok test_edges (tests.TestCase_RetevisRT21) Testing Retevis RT21 edges ... ok test_settings (tests.TestCase_RetevisRT21) Testing Retevis RT21 settings ... ok test_banks (tests.TestCase_KenwoodTS480CloneMode) Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTS480CloneMode) Testing Kenwood TS-480_CloneMode brute force ... ok test_clone (tests.TestCase_KenwoodTS480CloneMode) Testing Kenwood TS-480_CloneMode clone ... ok test_copy_all (tests.TestCase_KenwoodTS480CloneMode) Testing Kenwood TS-480_CloneMode copy all ... ok test_detect (tests.TestCase_KenwoodTS480CloneMode) Testing Kenwood TS-480_CloneMode detect ... ok test_edges (tests.TestCase_KenwoodTS480CloneMode) Testing Kenwood TS-480_CloneMode edges ... ok test_settings (tests.TestCase_KenwoodTS480CloneMode) Testing Kenwood TS-480_CloneMode settings ... ok test_banks (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 brute force ... ok test_clone (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 clone ... ok test_copy_all (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 copy all ... ok test_detect (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 detect ... ok test_edges (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 edges ... ok test_settings (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG brute force ... ok test_clone (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG clone ... ok test_copy_all (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG copy all ... ok test_detect (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG detect ... ok test_edges (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG edges ... ok test_settings (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H brute force ... ok test_clone (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H clone ... ok test_copy_all (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H copy all ... ok test_detect (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H detect ... ok test_edges (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H edges ... ok test_settings (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R banks ... ok test_brute_force (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R brute force ... ok test_clone (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R clone ... ok test_copy_all (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R copy all ... ok test_detect (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R detect ... ok test_edges (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R edges ... ok test_settings (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R settings ... ok test_banks (tests.TestCase_IcomID880H) Testing Icom ID-880H banks ... ok test_brute_force (tests.TestCase_IcomID880H) Testing Icom ID-880H brute force ... ok test_clone (tests.TestCase_IcomID880H) Testing Icom ID-880H clone ... ok test_copy_all (tests.TestCase_IcomID880H) Testing Icom ID-880H copy all ... ok test_detect (tests.TestCase_IcomID880H) Testing Icom ID-880H detect ... ok test_edges (tests.TestCase_IcomID880H) Testing Icom ID-880H edges ... ok test_settings (tests.TestCase_IcomID880H) Testing Icom ID-880H settings ... ok test_banks (tests.TestCase_KenwoodTS590SGCloneMode) Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode) Testing Kenwood TS-590SG_CloneMode brute force ... ok test_clone (tests.TestCase_KenwoodTS590SGCloneMode) Testing Kenwood TS-590SG_CloneMode clone ... ok test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode) Testing Kenwood TS-590SG_CloneMode copy all ... ok test_detect (tests.TestCase_KenwoodTS590SGCloneMode) Testing Kenwood TS-590SG_CloneMode detect ... ok test_edges (tests.TestCase_KenwoodTS590SGCloneMode) Testing Kenwood TS-590SG_CloneMode edges ... ok test_settings (tests.TestCase_KenwoodTS590SGCloneMode) Testing Kenwood TS-590SG_CloneMode settings ... ok test_banks (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 brute force ... ok test_clone (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 clone ... ok test_copy_all (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 copy all ... ok test_detect (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 detect ... ok test_edges (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 edges ... ok test_settings (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 settings ... ok test_banks (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M brute force ... ok test_clone (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M clone ... ok test_copy_all (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M copy all ... ok test_detect (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M detect ... ok test_edges (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M edges ... ok test_settings (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_RetevisRT22) Testing Retevis RT22 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT22) Testing Retevis RT22 brute force ... ok test_clone (tests.TestCase_RetevisRT22) Testing Retevis RT22 clone ... ok test_copy_all (tests.TestCase_RetevisRT22) Testing Retevis RT22 copy all ... ok test_detect (tests.TestCase_RetevisRT22) Testing Retevis RT22 detect ... ok test_edges (tests.TestCase_RetevisRT22) Testing Retevis RT22 edges ... ok test_settings (tests.TestCase_RetevisRT22) Testing Retevis RT22 settings ... ok test_banks (tests.TestCase_YaesuFT3D) Testing Yaesu FT3D banks ... ok test_brute_force (tests.TestCase_YaesuFT3D) Testing Yaesu FT3D brute force ... ok test_clone (tests.TestCase_YaesuFT3D) Testing Yaesu FT3D clone ... ok test_copy_all (tests.TestCase_YaesuFT3D) Testing Yaesu FT3D copy all ... ok test_detect (tests.TestCase_YaesuFT3D) Testing Yaesu FT3D detect ... ok test_edges (tests.TestCase_YaesuFT3D) Testing Yaesu FT3D edges ... ok test_settings (tests.TestCase_YaesuFT3D) Testing Yaesu FT3D settings ... ok test_banks (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R brute force ... ok test_clone (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R clone ... ok test_copy_all (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R copy all ... ok test_detect (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R detect ... ok test_edges (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R edges ... ok test_settings (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H banks ... ok test_brute_force (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H brute force ... ok test_clone (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H clone ... ok test_copy_all (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H copy all ... ok test_detect (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H detect ... ok test_edges (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H edges ... ok test_settings (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H settings ... ok test_banks (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 brute force ... ok test_clone (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 clone ... ok test_copy_all (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 copy all ... ok test_detect (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 detect ... ok test_edges (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 edges ... ok test_settings (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV brute force ... ok test_clone (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV clone ... ok test_copy_all (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV copy all ... ok test_detect (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV detect ... ok test_edges (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV edges ... ok test_settings (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV settings ... ok test_banks (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M brute force ... ok test_clone (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M clone ... ok test_copy_all (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M copy all ... ok test_detect (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M detect ... ok test_edges (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M edges ... ok test_settings (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R banks ... ok test_brute_force (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R brute force ... ok test_clone (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R clone ... ok test_copy_all (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R copy all ... ok test_detect (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R detect ... ok test_edges (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R edges ... ok test_settings (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R settings ... ok test_banks (tests.TestCase_RetevisRT22FRS) Testing Retevis RT22FRS banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT22FRS) Testing Retevis RT22FRS brute force ... ok test_clone (tests.TestCase_RetevisRT22FRS) Testing Retevis RT22FRS clone ... ok test_copy_all (tests.TestCase_RetevisRT22FRS) Testing Retevis RT22FRS copy all ... ok test_detect (tests.TestCase_RetevisRT22FRS) Testing Retevis RT22FRS detect ... ok test_edges (tests.TestCase_RetevisRT22FRS) Testing Retevis RT22FRS edges ... ok test_settings (tests.TestCase_RetevisRT22FRS) Testing Retevis RT22FRS settings ... ok test_banks (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H banks ... ok test_brute_force (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H brute force ... ok test_clone (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H clone ... ok test_copy_all (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H copy all ... ok test_detect (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H detect ... ok test_edges (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H edges ... ok test_settings (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H settings ... ok test_banks (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M brute force ... ok test_clone (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M clone ... ok test_copy_all (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M copy all ... ok test_detect (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M detect ... ok test_edges (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M edges ... ok test_settings (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M settings ... ok test_banks (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D brute force ... ok test_clone (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D clone ... ok test_copy_all (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D copy all ... ok test_detect (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D detect ... ok test_edges (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D edges ... ok test_settings (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D settings ... ok test_banks (tests.TestCase_TYTTHUV8000) Testing TYT TH-UV8000 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV8000) Testing TYT TH-UV8000 brute force ... ok test_clone (tests.TestCase_TYTTHUV8000) Testing TYT TH-UV8000 clone ... ok test_copy_all (tests.TestCase_TYTTHUV8000) Testing TYT TH-UV8000 copy all ... ok test_detect (tests.TestCase_TYTTHUV8000) Testing TYT TH-UV8000 detect ... ok test_edges (tests.TestCase_TYTTHUV8000) Testing TYT TH-UV8000 edges ... ok test_settings (tests.TestCase_TYTTHUV8000) Testing TYT TH-UV8000 settings ... ok test_banks (tests.TestCase_LeixenVV898) Testing Leixen VV-898 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LeixenVV898) Testing Leixen VV-898 brute force ... ok test_clone (tests.TestCase_LeixenVV898) Testing Leixen VV-898 clone ... ok test_copy_all (tests.TestCase_LeixenVV898) Testing Leixen VV-898 copy all ... ok test_detect (tests.TestCase_LeixenVV898) Testing Leixen VV-898 detect ... ok test_edges (tests.TestCase_LeixenVV898) Testing Leixen VV-898 edges ... ok test_settings (tests.TestCase_LeixenVV898) Testing Leixen VV-898 settings ... ok test_banks (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D brute force ... ok test_clone (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D clone ... ok test_copy_all (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D copy all ... ok test_detect (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D detect ... ok test_edges (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D edges ... ok test_settings (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported' test_banks (tests.TestCase_RetevisRT22S) Testing Retevis RT22S banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT22S) Testing Retevis RT22S brute force ... ok test_clone (tests.TestCase_RetevisRT22S) Testing Retevis RT22S clone ... ok test_copy_all (tests.TestCase_RetevisRT22S) Testing Retevis RT22S copy all ... ok test_detect (tests.TestCase_RetevisRT22S) Testing Retevis RT22S detect ... ok test_edges (tests.TestCase_RetevisRT22S) Testing Retevis RT22S edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_RetevisRT22S) Testing Retevis RT22S settings ... ok test_banks (tests.TestCase_YaesuFT4VR) Testing Yaesu FT-4VR banks ... ok test_brute_force (tests.TestCase_YaesuFT4VR) Testing Yaesu FT-4VR brute force ... ok test_clone (tests.TestCase_YaesuFT4VR) Testing Yaesu FT-4VR clone ... ok test_copy_all (tests.TestCase_YaesuFT4VR) Testing Yaesu FT-4VR copy all ... ok test_detect (tests.TestCase_YaesuFT4VR) Testing Yaesu FT-4VR detect ... ok test_edges (tests.TestCase_YaesuFT4VR) Testing Yaesu FT-4VR edges ... ok test_settings (tests.TestCase_YaesuFT4VR) Testing Yaesu FT-4VR settings ... ok test_banks (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S brute force ... ok test_clone (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S clone ... ok test_copy_all (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S copy all ... ok test_detect (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S detect ... ok test_edges (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S edges ... ok test_settings (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S settings ... ok test_banks (tests.TestCase_TYTTHUV88) Testing TYT TH-UV88 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV88) Testing TYT TH-UV88 brute force ... ok test_clone (tests.TestCase_TYTTHUV88) Testing TYT TH-UV88 clone ... ok test_copy_all (tests.TestCase_TYTTHUV88) Testing TYT TH-UV88 copy all ... ok test_detect (tests.TestCase_TYTTHUV88) Testing TYT TH-UV88 detect ... ok test_edges (tests.TestCase_TYTTHUV88) Testing TYT TH-UV88 edges ... ok test_settings (tests.TestCase_TYTTHUV88) Testing TYT TH-UV88 settings ... ok test_banks (tests.TestCase_YaesuFT4XE) Testing Yaesu FT-4XE banks ... ok test_brute_force (tests.TestCase_YaesuFT4XE) Testing Yaesu FT-4XE brute force ... ok test_clone (tests.TestCase_YaesuFT4XE) Testing Yaesu FT-4XE clone ... ok test_copy_all (tests.TestCase_YaesuFT4XE) Testing Yaesu FT-4XE copy all ... ok test_detect (tests.TestCase_YaesuFT4XE) Testing Yaesu FT-4XE detect ... ok test_edges (tests.TestCase_YaesuFT4XE) Testing Yaesu FT-4XE edges ... ok test_settings (tests.TestCase_YaesuFT4XE) Testing Yaesu FT-4XE settings ... ok test_banks (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 brute force ... ok test_clone (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 clone ... ok test_copy_all (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 copy all ... ok test_detect (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 detect ... ok test_edges (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 edges ... ok test_settings (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 settings ... ok test_banks (tests.TestCase_YaesuFT4XR) Testing Yaesu FT-4XR banks ... ok test_brute_force (tests.TestCase_YaesuFT4XR) Testing Yaesu FT-4XR brute force ... ok test_clone (tests.TestCase_YaesuFT4XR) Testing Yaesu FT-4XR clone ... ok test_copy_all (tests.TestCase_YaesuFT4XR) Testing Yaesu FT-4XR copy all ... ok test_detect (tests.TestCase_YaesuFT4XR) Testing Yaesu FT-4XR detect ... ok test_edges (tests.TestCase_YaesuFT4XR) Testing Yaesu FT-4XR edges ... ok test_settings (tests.TestCase_YaesuFT4XR) Testing Yaesu FT-4XR settings ... ok test_banks (tests.TestCase_MidlandDBR2500) Testing Midland DBR2500 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_MidlandDBR2500) Testing Midland DBR2500 brute force ... ok test_clone (tests.TestCase_MidlandDBR2500) Testing Midland DBR2500 clone ... ok test_copy_all (tests.TestCase_MidlandDBR2500) Testing Midland DBR2500 copy all ... ok test_detect (tests.TestCase_MidlandDBR2500) Testing Midland DBR2500 detect ... ok test_edges (tests.TestCase_MidlandDBR2500) Testing Midland DBR2500 edges ... ok test_settings (tests.TestCase_MidlandDBR2500) Testing Midland DBR2500 settings ... ok test_banks (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 brute force ... ok test_clone (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 clone ... ok test_copy_all (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 copy all ... ok test_detect (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 detect ... ok test_edges (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 edges ... ok test_settings (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 settings ... ok test_banks (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 brute force ... ok test_clone (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 clone ... ok test_copy_all (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 copy all ... ok test_detect (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 detect ... ok test_edges (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 edges ... ok test_settings (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 brute force ... ok test_clone (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 clone ... ok test_copy_all (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 copy all ... ok test_detect (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 detect ... ok test_edges (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 edges ... ok test_settings (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 settings ... ok

---------------------------------------------------------------------- Ran 1085 tests in 479.779s

OK (skipped=153)

struct memory { bbcd rx_freq[4]; bbcd tx_freq[4]; lbcd rx_tone[2]; lbcd tx_tone[2];

u8 unknown10:5, highpower:1, unknown11:2; u8 unknown20:4, narrow:1, unknown21:3; u8 unknown31:1, scanadd:1, unknown32:6; u8 unknown4; };

struct name { char name[7]; };

#seekto 0x0010; struct memory channels[128];

#seekto 0x08C0; struct name names[128];

#seekto 0x2020; struct memory vfo1; struct memory vfo2;

style create: /chirp/.tox/style style installdeps: pep8==1.6.2, future style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2 style run-test-pre: PYTHONHASHSEED='3755718451' style run-test: commands[0] | python ./tools/cpep8.py ___________________________________ summary ____________________________________ unit: commands succeeded driver: commands succeeded style: commands succeeded congratulations :) Email was triggered for: Success Sending email for trigger: Success