I had this issue recently and it was a file permissions issue on /dev/ttyUSB0. Make sure you have write permission.
-Nathan
On Tue, May 10, 2016 at 12:53 PM, Tom Masterson via chirp_devel < chirp_devel@intrepid.danplanet.com> wrote:
I am working with several radios some of which I expect not to work so no problem. However if I hook up a Baofeng UV-6 and ask chirp to do a download via ttyUSB0 under Ubuntu 14.04 I get "Radio did not respond" error. Nothing else shows in the log even if I use debug level and verbose settings.
Radio connected with it's proper cable and volume on full (though I have tested it at various volume settings). I get the expected errors if the cable is not plugged into the computer so I assume it is reading the port correctly.
Any suggestions on what I may be doing wrong?
Thanks Tom _______________________________________________ chirp_devel mailing list chirp_devel@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_devel Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers