I am getting the following error from BruteForce testing- Failed to validate Memory 0: 2.400000/0.600000 LSB () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 USB () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 CW () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 FM () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 AM () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 FSK () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 CW-R () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 FSK-R () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 Data+LSB () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 Data+USB () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range'] Failed to validate Memory 0: 2.400000/0.600000 Data+FM () r88.5 c88.5 d023 NN [5.00]: ['Frequency 2.400000 is out of supported range']
Where is that 2.4 MHz value coming from? The Valid Bands declaration excludes it, so yes, it will fail. My test img file has 3.985 MHz in memory channel 0. This is also causing the Edges test to fail with: "No mutable memory locations found"