The FT1900R was in CLONE mode (same as 1802, i.e., on+A/N LOW), but failed to read. Where is the debug.log? I got this message on the console:
User selected Yaesu FT-1900R on port /dev/ttyUSB0 Clone thread started
-- Exception: -- Traceback (most recent call last): File "/home/ran/Downloads/chirp-0.3.0/chirpui/clone.py", line 225, in run self.__radio.sync_in() File "/home/ran/Downloads/chirp-0.3.0/chirp/yaesu_clone.py", line 199, in sync_in self._mmap = _clone_in(self) File "/home/ran/Downloads/chirp-0.3.0/chirp/yaesu_clone.py", line 84, in _clone_in raise errors.RadioError("Failed to communicate with the radio: %s" % e) RadioError: Failed to communicate with the radio: No response from radio ------ Clone failed: Failed to communicate with the radio: No response from radio Clone thread ended --- Exception Dialog: Failed to communicate with the radio: No response from radio --- None ----------------------------