Couple of implementation questions- Your Settings > Extra method didn't 'take' for my model, OK if I move that to get_settings? Can I pull the 'Experimental' warning after testing? Any problem if I append the model string to MEM_FORMAT for access by the browser tab? Shouldn't effect anything....?
Rick DeWitt AA0RD Sequim, Washington, USA 360-681-3494
On 3/8/2018 4:43 PM, Jim Unroe wrote:
Hi Rick,
Perfect! That's what I was hoping for.
Glad to hear it.
I am testing your lt725.py mods with my Zastone now. It treats the power settings exactly the same; only 1 bit for low/high in the map, but low/'mig'/high at the radio. I'm pretty sure that the individual channel power settings are ignored on upload, and just the bank power level is applied to all.
I do know the programming software (factory and CHIRP) reads and writes the power levels on a per-channel basis. Programming the memories via the keypad does too. But if you are in MR mode and change the power level, it seems to be global.
I will verify that. Might as well leave the individual settings 'settable', since the vendor s/w does that.
I agree. I just gave up on it too easy when I originally worked it up.
You want me to submit the patch to lt725uv when I'm done testing, or do you want to?
You do it. It's your project. My goal was to help you out... not to take over. ;-)
Jim KC9HI