Hi Jim and all, see below

El 28/03/16 a las 20:48, Jim Unroe escribió:
Pavel,

I tested with all 5 of the radios in my possession. After increasing
the SERIAL_TIMEOUT to 0.68, here are the failures.

UV-2501+220 will not upload under Linux or Windows. Changing the
timeout value makes not difference that I can see.

I think I found the bug, reviewing the serial logs I found that the 2501+220 does a extra step before the upload of the first block and just after the second ID, I will work on that direction.

Funny, it's just on the upload process.

Mini-8900 will not download under Linux. Changing the timeout value
makes no difference that I can see.

This is the same problem I found earlier, the radio does not give the bad ack on the dummy block, and this is inserted after the valid one in the first valid block read.

000: 06 05 58 00 00 40 00 25   ..X..@.%

What keep me puzzled is that this only happen on Linux...

Jim, can you make two portmon serial log of a download in windows, first with the OEM and then with Chirp ?

Also activate the "debug = True" and send to me the debug.log that correspond to that Chirp download.

All this for the WACCOM Mini of course.

73 Pavel.