Re: [chirp_devel] [PATCH] [VV-898] Updates to Prepare for Adding User Settings #2119

Attached is a fully populated factory image from Leixen VV-898 to replace the one in the repository.

Jim KC9HI

On Tue, Dec 23, 2014 at 9:10 PM, Jim Unroe rock.unroe@gmail.com wrote:

# HG changeset patch # User Jim Unroe rock.unroe@gmail.com # Date 1419386659 18000 # Node ID 5009f449891c5e217244eca3e2a6298183fadb3f # Parent 1d3eb2711f911153c1a786889aba4cbb59985c21 [VV-898] Updates to Prepare for Adding User Settings #2119

Adjust the amount of memory read/written during cloning to expose settings.

Improve detection of Leixen and Jetstream data file images.

diff -r 1d3eb2711f91 -r 5009f449891c chirp/leixen.py --- a/chirp/leixen.py Sat Dec 20 07:47:43 2014 -0800 +++ b/chirp/leixen.py Tue Dec 23 21:04:19 2014 -0500 @@ -120,20 +120,19 @@ do_ident(radio)

 data = ""

• for start, end in radio._ranges:

•    data += "\xFF" * (start - len(data))
  

•    for addr in range(start, end, 0x10):
  

•        send(radio, make_frame("R", addr, chr(0x10)))
  

•        _addr, _data = recv(radio)
  

•        if _addr != addr:
  

•            raise errors.RadioError("Radio sent unexpected address")
  

•        data += _data
  

• data += "\xFF" * (0 - len(data))
• for addr in range(0, radio._memsize, 0x10):

•    send(radio, make_frame("R", addr, chr(0x10)))
  

•    _addr, _data = recv(radio)
  

•    if _addr != addr:
  

•        raise errors.RadioError("Radio sent unexpected address")
  

•    data += _data
  
  

•        status = chirp_common.Status()
  

•        status.cur = addr
  

•        status.max = radio._memsize
  

•        status.msg = "Cloning from radio"
  

•        radio.status_fn(status)
  

•    status = chirp_common.Status()
  

•    status.cur = addr
  

•    status.max = radio._memsize
  

•    status.msg = "Cloning from radio"
  

•    radio.status_fn(status)
  
  

  finish(radio)

@@ -142,20 +141,21 @@ def do_upload(radio): do_ident(radio)

• for addr in range(0x0d00, 0x2000, 0x10):

•    frame = make_frame("W", addr, radio._mmap[addr:addr + 0x10])
  

•    send(radio, frame)
  

•    # print "     P<R: %s" % util.hexprint(frame).replace("\n", "\n          ")
  

•    radio.pipe.write("\x06\x00\x06")
  

•    ack = radio.pipe.read(3)
  

•    if ack != "\x06\x00\x06":
  

•        raise errors.RadioError("Radio refused block at %04x" % addr)
  

• for start, end in radio._ranges:

•    for addr in range(start, end, 0x10):
  

•        frame = make_frame("W", addr, radio._mmap[addr:addr + 0x10])
  

•        send(radio, frame)
  

•        # print "     P<R: %s" % util.hexprint(frame).replace("\n", "\n          ")
  

•        radio.pipe.write("\x06\x00\x06")
  

•        ack = radio.pipe.read(3)
  

•        if ack != "\x06\x00\x06":
  

•            raise errors.RadioError("Radio refused block at %04x" % addr)
  
  

•    status = chirp_common.Status()
  

•    status.cur = addr
  

•    status.max = radio._memsize
  

•    status.msg = "Cloning to radio"
  

•    radio.status_fn(status)
  

•        status = chirp_common.Status()
  

•        status.cur = addr
  

•        status.max = radio._memsize
  

•        status.msg = "Cloning to radio"
  

•        radio.status_fn(status)
  
  

  finish(radio)

@@ -171,9 +171,15 @@ MODEL = "VV-898" BAUD_RATE = 9600

• _file_ident = "LX-\x89\x85\x63" _memsize = 0x2000 _ranges = [

•    (0x0900, 0x0910),
  

•    (0x0000, 0x013f),
  

•    (0x0148, 0x016f),
  

•    (0x0184, 0x018f),
  

•    (0x0190, 0x01cf),
  

•    (0x0900, 0x090f),
  

•    (0x0920, 0x0927),
     (0x0d00, 0x2000),
  

  ]

@@ -324,8 +330,7 @@

 @classmethod
 def match_model(cls, filedata, filename):

•    model = filedata[0x900:0x906]
  

•    return model == cls.MODEL
  

•    return filedata[0x170:0x176] == cls._file_ident
  
  
  

@directory.register @@ -333,3 +338,5 @@ """Jetstream JT270M""" VENDOR = "Jetstream" MODEL = "JT270M"

• _file_ident = "LX-\x89\x85\x53"