Tested changes:
Changes for Build #848 [Andrew Jorgensen andrew@jorgensenfamily.us] [frs/gmrs] 2017 rule changes Fixes #5753
This adds the additional FRS channels (15-22) and expands GMRS channels include all frequencies add in the 2017 rule changes.
It also adds the GMRS repeater channels with the prescribed +5.0MHz offset (though you'll have to find the correct tones for your local GMRS repeaters).
After some feedback on the mailing list, I've chosen to number the channels according to the FRS numbering, rather than try to preserve the obsolete numbering, and I've chosen to name the GMRS repeater channels with both the "550" style numbering that's common in repeater naming and the "15R" name that makes it clear that it's receiving on channel 15.
[Jim Unroe rock.unroe@gmail.com] Fix Kenwood TK-370 tuning steps
Also TK-260, TK-270, TK-272, TK-278, TK-360, TK-372 and TK-378
fixes #7199
[Jim Unroe rock.unroe@gmail.com] Fix Puxing PX-888K tuning steps
fixes #6887
[Jim Unroe rock.unroe@gmail.com] Fix Yaesu FT-4 valid steps
Should also fix FT-25, FT-35 and FT-65.
fixes #6807
[Jim Unroe rock.unroe@gmail.com] Fix Radioddity R2 tuning steps
fixes #6743
[Jim Unroe rock.unroe@gmail.com] Fix Yaesu FTM-350 tuning steps
fixes #6639
[Tom Hayward tom@tomh.us] [id880] Fix typo in charset definition. #281
[Tom Hayward tom@tomh.us] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward tom@tomh.us] [id880] Support full charset. Fixes #281
[Tom Hayward tom@tomh.us] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward tom@tomh.us] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward tom@tomh.us] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward tom@tomh.us] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith dsmith@danplanet.com] [vx7] Fix setting memory power levels on 220MHz band Fixes #214
[Dan Smith dsmith@danplanet.com] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi iz3gme.marco@gmail.com] Consider lower bound frequency of each valid_band as valid Fix bug #181
[Tom Hayward tom@tomh.us] tmd700: allow 8-char names. Fixes #176
[Dan Smith dsmith@danplanet.com] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172
[David Griffith dave@661.org] Bug #155 fix: VX-7 1.25m power levels
[David Griffith dave@661.org] New INSTALL and README files Fixes #122
[Tom Hayward tom@tomh.us] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi iz3gme.marco@gmail.com] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163
[Tom Hayward tom@tomh.us] Fix Mac .app so paths with spaces work. Fixes Bug #145
Changes for Build #849 [Dan Smith dsmith@danplanet.com] [ftm350] Fix trailing whitespace style issue
Fallout from #6639
[Dan Smith dsmith@danplanet.com] [ts590] De-register the TS590 clone mode driver
...which seems to be breaking File->New. This is a band-aid until that can be investigated and resolved.
#7409
[Tom Hayward tom@tomh.us] [id880] Fix typo in charset definition. #281
[Tom Hayward tom@tomh.us] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward tom@tomh.us] [id880] Support full charset. Fixes #281
[Tom Hayward tom@tomh.us] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward tom@tomh.us] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward tom@tomh.us] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward tom@tomh.us] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith dsmith@danplanet.com] [vx7] Fix setting memory power levels on 220MHz band Fixes #214
[Dan Smith dsmith@danplanet.com] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi iz3gme.marco@gmail.com] Consider lower bound frequency of each valid_band as valid Fix bug #181
[Tom Hayward tom@tomh.us] tmd700: allow 8-char names. Fixes #176
[Dan Smith dsmith@danplanet.com] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172
[David Griffith dave@661.org] Bug #155 fix: VX-7 1.25m power levels
[David Griffith dave@661.org] New INSTALL and README files Fixes #122
[Tom Hayward tom@tomh.us] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi iz3gme.marco@gmail.com] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163
[Tom Hayward tom@tomh.us] Fix Mac .app so paths with spaces work. Fixes Bug #145
Changes for Build #850 [Josh Small VK2HFF chirp@vk2hff.ampr.org] Issue #3 - New(!) Model, Yaesu FT-1500M
[Jim Unroe rock.unroe@gmail.com] Fix Wouxun KG-UV6D/X tuning steps
This patch adds the missing 2.5 KHz tuning step for the Wouxun KG-UV6D and KG-UV6X.
fixes #7191
[Tom Hayward tom@tomh.us] [id880] Fix typo in charset definition. #281
[Tom Hayward tom@tomh.us] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward tom@tomh.us] [id880] Support full charset. Fixes #281
[Tom Hayward tom@tomh.us] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward tom@tomh.us] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward tom@tomh.us] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward tom@tomh.us] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith dsmith@danplanet.com] [vx7] Fix setting memory power levels on 220MHz band Fixes #214
[Dan Smith dsmith@danplanet.com] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi iz3gme.marco@gmail.com] Consider lower bound frequency of each valid_band as valid Fix bug #181
[Tom Hayward tom@tomh.us] tmd700: allow 8-char names. Fixes #176
[Dan Smith dsmith@danplanet.com] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172
[David Griffith dave@661.org] Bug #155 fix: VX-7 1.25m power levels
[David Griffith dave@661.org] New INSTALL and README files Fixes #122
[Tom Hayward tom@tomh.us] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi iz3gme.marco@gmail.com] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163
[Tom Hayward tom@tomh.us] Fix Mac .app so paths with spaces work. Fixes Bug #145
Full log:
Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev 5b19a2a78d9c4971fc85aa3f7cdfdbaaac26c7df [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 5b19a2a78d9c4971fc85aa3f7cdfdbaaac26c7df No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson5396667473941682861.sh + hg id + cut -d -f 1 + docker run --rm --env REPO=http://d-rats.com/hg/chirp.hg --env REV=b5589aa94c1e chirp tox + repo=http://d-rats.com/hg/chirp.hg + rev=b5589aa94c1e + cd / + '[' '!' -d chirp ']' + hg clone http://d-rats.com/hg/chirp.hg chirp requesting all changes adding changesets adding manifests adding file changes added 3281 changesets with 5255 changes to 592 files (+4 heads) updating to branch default 396 files updated, 0 files merged, 0 files removed, 0 files unresolved + cd chirp + '[' b5589aa94c1e ']' + hg pull http://d-rats.com/hg/chirp.hg pulling from http://d-rats.com/hg/chirp.hg searching for changes no changes found + hg checkout b5589aa94c1e 0 files updated, 0 files merged, 0 files removed, 0 files unresolved + tox GLOB sdist-make: /chirp/setup.py unit create: /chirp/.tox/unit unit installdeps: nose, mox, mock, future unit inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip unit installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,funcsigs==1.0.2,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,mock==3.0.5,mox==0.5.3,nose==1.3.7,packaging==19.0,pathlib2==2.3.4,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2 unit run-test-pre: PYTHONHASHSEED='3838380421' unit run-test: commands[0] | nosetests -v tests/unit test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_load_mmap_bad_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok test_load_mmap_no_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok test_load_mmap_saves_metadata_on_radio (tests.unit.test_chirp_common.TestImageMetadata) ... ok test_make_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok test_save_mmap_includes_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok test_save_mmap_no_metadata_not_img_file (tests.unit.test_chirp_common.TestImageMetadata) ... ok test_strip_metadata (tests.unit.test_chirp_common.TestImageMetadata) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_compare_version_to_current (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_compare_version_to_current_dev (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_detect_with_metadata_alias_class (tests.unit.test_directory.TestDirectory) ... ok test_detect_with_metadata_base_class (tests.unit.test_directory.TestDirectory) ... ok test_detect_with_no_metadata (tests.unit.test_directory.TestDirectory) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok
---------------------------------------------------------------------- Ran 163 tests in 0.094s
OK unit run-test: commands[1] | python ./share/make_supported.py /dev/null driver create: /chirp/.tox/driver driver installdeps: future driver inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip driver installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2 driver run-test-pre: PYTHONHASHSEED='3838380421' driver run-test: commands[0] | python -munittest -vb tests tests (unittest.loader.LoadTestsFailure) ... ERROR
====================================================================== ERROR: tests (unittest.loader.LoadTestsFailure) ---------------------------------------------------------------------- Exception: Unknown radio type `Kenwood_TS-590SG_CloneMode'
---------------------------------------------------------------------- Ran 1 test in 0.000s
FAILED (errors=1)
#seekto 0x0100; struct { char sw_name[7]; char sw_ver[5]; u8 unknown1[4]; char sw_key[12]; u8 unknown2[4]; char model[5]; u8 unknown3[11]; } header;
#seekto 0x0140; struct { // 0x0140 u8 unknown1; u8 sublcd; u8 unknown2[30];
// 0x0160 char pon_msgtext[12]; u8 min_volume; u8 max_volume; u8 lo_volume; u8 hi_volume;
// 0x0170 u8 tone_volume_offset; u8 poweron_tone; u8 control_tone; u8 warning_tone; u8 alert_tone; u8 sidetone; u8 locator_tone; u8 unknown3[2]; u8 ignition_mode; u8 ignition_time; // In tens of minutes (6 = 1h) u8 micsense; ul16 modereset; u8 min_vol_preset; u8 unknown4;
// 0x0180 u8 unknown5[16];
// 0x0190 u8 unknown6[3]; u8 pon_msgtype; u8 unknown7[8]; u8 unknown8_1:2, ssi:1, busy_led:1, power_switch_memory:1, scrambler_memory:1, unknown8_2:1, off_hook_decode:1; u8 unknown9_1:5, clockfmt:1, datefmt:1, ignition_sense:1; u8 unknownA[2];
// 0x01A0 u8 unknownB[8]; u8 ptt_timer; u8 unknownB2[3]; u8 ptt_proceed:1, unknownC_1:3, tone_off:1, ost_memory:1, unknownC_2:1, ptt_release:1; u8 unknownD[3]; } settings;
#seekto 0x01E0; struct { char name[12]; ul16 rxtone; ul16 txtone; } ost_tones[40];
#seekto 0x0A00; ul16 zone_starts[128];
struct zoneinfo { u8 number; u8 zonetype; u8 unknown1[2]; u8 count; char name[12]; u8 unknown2[2]; ul16 timeout; // 15-1200 ul16 tot_alert; // 10 ul16 tot_rekey; // 60 ul16 tot_reset; // 15 u8 unknown3[3]; u8 unknown21:2, bcl_override:1, unknown22:5; u8 unknown5; };
struct memory { u8 number; lbcd rx_freq[4]; lbcd tx_freq[4]; u8 unknown1[2]; ul16 rx_tone; ul16 tx_tone; char name[12]; u8 unknown2[19]; u8 unknown3_1:4, highpower:1, unknown3_2:1, wide:1, unknown3_3:1; u8 unknown4; };
#seekto 0xC570; // Fixme u8 skipflags[64];
#seekto 0xb00; struct { struct zoneinfo zoneinfo; struct memory memories[2]; } zone0;
ERROR: InvocationError for command /chirp/.tox/driver/bin/python -munittest -vb tests (exited with code 1) style create: /chirp/.tox/style style installdeps: pep8==1.6.2, future style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2 style run-test-pre: PYTHONHASHSEED='3838380421' style run-test: commands[0] | python ./tools/cpep8.py ___________________________________ summary ____________________________________ unit: commands succeeded ERROR: driver: commands failed style: commands succeeded Build step 'Execute shell' marked build as failure Email was triggered for: Failure Sending email for trigger: Failure