# HG changeset patch
# User Rick DeWitt <aa0rd@yahoo.com>
# Date 1529500236 25200
#      Wed Jun 20 06:10:36 2018 -0700
# Node ID e541c17589d345e52b239bac6e565f21e3cc1576
# Parent  b08fbd75a49999f7f8054a054d7ae6a8cc45c684
[ft450d] Add verbage for new Information prompt, issue #5891

diff -r b08fbd75a499 -r e541c17589d3 chirp/drivers/ft450d.py
--- a/chirp/drivers/ft450d.py	Wed Jun 13 06:14:11 2018 -0700
+++ b/chirp/drivers/ft450d.py	Wed Jun 20 06:10:36 2018 -0700
@@ -370,9 +370,20 @@
     @classmethod
     def get_prompts(cls):
         rp = chirp_common.RadioPrompts()
+        rp.info = _(dedent("""
+            The FT-450 radio driver loads the 'Special Channels' tab
+            with the PMS scanning range memories (group 11), 60meter
+            channels (group 12), the QMB (STO/RCL) memory, the HF and
+            50m HOME memories and all the A and B VFO memories.
+            There are VFO memories for the last frequency dialed in
+            each band. The last mem-tune config is also stored.
+            These Special Channels allow limited field editting.
+            This driver also populates the 'Other' tab in the channel
+            memory Properties window. This tab contains values for
+            those channel memory settings that don't fall under the
+            standard Chirp display columns.
+            """))
         rp.pre_download = _(dedent("""\
-            Note that this radio has 'Special Channels' and generates an
-            'Other' tab in the channel memory Properties window...
             1. Turn radio off.
             2. Connect cable to ACC jack.
             3. Press and hold in the [MODE &lt;] and [MODE &gt;] keys while