Hi Pavel,
Thanks much for reaching out to me. I don't believe any of these radios have the trunking board. I have quite a few of them and have downloaded from them quite a few times from a Windows box. I didn't even think about it until working with a Linux machine recently.
It is certainly easy to reproduce as it fails every time with every TK-272G I've tried so far on Linux/Chirp.
I've started digging into the driver a bit, but haven't made much progress yet. If there is something you'd recommend trying, I'd love to hear it.
Thanks again!
73 Travis KE0SAC
On Fri, Mar 1, 2019 at 10:51 PM Pavel Milanes Costa via chirp_devel < chirp_devel@intrepid.danplanet.com> wrote:
Hi Travis!
I'm de developer of the Kenwood Family 60 & 60G Chirp's driver, this bug was worked out but not solved, my last findings was about some odd behavior with radios that has a trunking boards... if I don't recall bad...
Aka: radios with no trunking borads work flawlessly, but again this is not written in stone.
I will be happy to work this issue with you, but sadly I don't has any of that radios anymore...
73 Pavel CO7WT. El 1/3/19 a las 14:39, Travis Veldkamp via chirp_devel escribió:
Greetings! I'm working with a batch of TK-272G radios and have come across bug 5149. Specifically, I see this when using my Ubuntu laptop, but NOT with Windows. I'm using the same cable, version, etc. I'm happy to debug this, but wondering if these symptoms ring a bell for someone more familiar with this driver/radio?
This is the end of the log, showing the block of data:
[2019-02-28 18:20:17,727] chirp.drivers.tk760g - DEBUG: Starting the download from radio [2019-02-28 18:20:17,778] chirp.drivers.tk760g - DEBUG: <== (28) bytes:
000: 57 03 00 04 00 10 00 10 W....... 008: 00 20 00 2f 00 ff ff 01 .../.... 016: 13 1e 00 00 00 00 00 00 ........ 024: 00 ff ff ff 00 00 00 00 ........
At this point, I'm still enough of a newbie that that block of data is pretty meaningless to me. :) When I get back to the windows machine, I'll try to get a similar dump and compare, but thought maybe I could make some progress in the meantime.
Perhaps it is also interesting to note that I'm able to write a saved image to the radio. I just can't read a new one.
I was really intending to add some features to this driver that exist in KPG56D, as well as debug an issue where the "Settings" tab sometimes comes up empty after reading from a radio, but it looks like I've been side-tracked. :-)
Thanks for any insight!
-Travis
chirp_devel mailing listchirp_devel@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_devel Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
chirp_devel mailing list chirp_devel@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_devel Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers