# HG changeset patch # User Jim Unroe rock.unroe@gmail.com # Date 1482101562 18000 # Node ID 7f4f84adc8b918844ee42953955501b253db1ea4 # Parent d676300e640f1b86d655ddf143fcd4797f38f22c PEP8 cleanup for Alinco driver
This patch resolves the issues that are causing the Alinco driver to be flagged as needing a bit of PEP8 cleanup.
#4315
diff -r d676300e640f -r 7f4f84adc8b9 chirp/drivers/alinco.py --- a/chirp/drivers/alinco.py Sun Dec 18 16:41:02 2016 -0500 +++ b/chirp/drivers/alinco.py Sun Dec 18 17:52:42 2016 -0500 @@ -592,6 +592,7 @@ } memory[1000]; """
+ @directory.register class AlincoDJG7EG(AlincoStyleRadio): """Alinco DJ-G7EG""" @@ -600,12 +601,14 @@ BAUD_RATE = 57600
# Those are different from the other Alinco radios. - STEPS = [5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0, 100.0, 125.0, 150.0, 200.0, 500.0, 1000.0] + STEPS = [5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0, + 100.0, 125.0, 150.0, 200.0, 500.0, 1000.0] DUPLEX = ["", "+", "-"] MODES = ["NFM", "FM", "AM", "WFM"] TMODES = ["", "??1", "Tone", "TSQL", "TSQL-R", "DTCS"]
- _model = "AL~DJ-G7EG" # This is a bit of a hack to avoid overwriting _identify() + # This is a bit of a hack to avoid overwriting _identify() + _model = "AL~DJ-G7EG" _memsize = 0x1a7c0 _range = [(500000, 1300000000)]
@@ -613,7 +616,7 @@ rf = chirp_common.RadioFeatures() rf.has_dtcs_polarity = False rf.has_bank = False - rf.has_settings = False + rf.has_settings = False
rf.valid_modes = self.MODES rf.valid_tmodes = ["", "Tone", "TSQL", "Cross", "TSQL-R", "DTCS"] @@ -715,7 +718,8 @@ mem.tuning_step = self.STEPS[_mem.step] mem.offset = int(_mem.offset) mem.duplex = self.DUPLEX[_mem.duplex] - if self.TMODES[_mem.squelch_type] == "TSQL" and _mem.tx_tone != _mem.rx_tone: + if self.TMODES[_mem.squelch_type] == "TSQL" and \ + _mem.tx_tone != _mem.rx_tone: mem.tmode = "Cross" mem.cross_mode = "Tone->Tone" else: @@ -733,7 +737,7 @@ # Get a low-level memory object mapped to the image _mem = self._memobj.memory[mem.number] if mem.empty: - _mem.unknown = 0x00 # Maybe 0 is empty, 2 is used? + _mem.unknown = 0x00 # Maybe 0 is empty, 2 is used? else: _mem.unknown = 0x02 _mem.freq = mem.freq @@ -746,34 +750,35 @@ try: _mem.tx_tone = ALINCO_TONES.index(mem.rtone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.rtone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.rtone) try: _mem.rx_tone = ALINCO_TONES.index(mem.ctone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.ctone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.ctone) elif mem.tmode == "TSQL": _mem.squelch_type = self.TMODES.index("TSQL") - # Note how the same TSQL tone is copied to both memory locaations + # Note how the same TSQL tone is copied to both memory + # locaations try: _mem.tx_tone = ALINCO_TONES.index(mem.ctone)+1 _mem.rx_tone = ALINCO_TONES.index(mem.ctone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.ctone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.ctone) else: _mem.squelch_type = self.TMODES.index(mem.tmode) try: _mem.tx_tone = ALINCO_TONES.index(mem.rtone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.rtone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.rtone) try: _mem.rx_tone = ALINCO_TONES.index(mem.ctone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.ctone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.ctone) _mem.dcs = DCS_CODES[self.VENDOR].index(mem.dtcs) _mem.skip = (mem.skip == "S") - _mem.name = "\x00".join(mem.name).ljust(32,"\x00") + _mem.name = "\x00".join(mem.name).ljust(32, "\x00")