Michael,
Could you please add your models in line 1728 (for DTMF) and 1991 (for 5-Tone) of the attached module, load it in chirp, test whether chirp displays the DTMF and 5-Tone-Settings as configured in the OEM-software - and report the result?
First is it very annoying that the CHIRP window automatically gets very tall (taller than the screen is and there are no scroll bars.
I believe all of these radios have the DTMF, 2-tone and 5-tone settings. I confirmed this by loading the OEM software for the radios that I have.
BTech UV-2501, UV-2501+220, UV-5001 Luiton LT-588UV WACCOM Mini-8900 Plus
Here is the problem. All of these radios are shipped from the factory with no values in most of these settings. So when you load an image that was initially created from a radio with factory settings, there will be no values for these settings. The DTMF settings will be OK, but the 2-tone and 5-tone settings panels will have to fields to enter values.
You can't download from the radio using the OEM software and try to edit settings either. This is because entering the 5-tone settings panel will crash the OEM software if there are no values in the settings. The work around is to launch the OEM software. The OEM software will then have default values in all of the DTMF, 2-tone and 5-ton menus. At this point you can upload these default setting to the radio. Then after downloading with CHIRP the 2-tone and 5-tone settings will be editable. You can then import you channels into this tab and all should be good.
What appears to need to happen is to have CHIRP still show settings boxes when the settings don't have (valid) values. Otherwise there is no way to edit values using CHIRP. The OEM software wound need to be used as I described above.
Jim KC9HI