Re: [chirp_devel] [PATCH 0 of 2 ] Add cross dtcs support - second try

I also noticed:

Wouxun KG-UVD1P BruteForce FAILED: Field `tmode' is `DTCS',

expected `Cross'

This seams to be introduced by my patch to the UI ... I will check ...

I'm sure I had run test_all before to send the patches, I probably need a better pair of glasses ;)

I will send a third try

73 de IZ3GME Marco

On 25/05/2012 02:40, Dan Smith wrote:

With the patches applied:

...

 Yaesu FT-857/897    CopyAll     FAILED:<25>: Field `dtcs' is `23', expected `32'
 Yaesu FT-857/897    BruteForce  FAILED: Field `dtcs' is `23', expected `25'
 Yaesu FT-857/897    Edges       PASSED: All tests
 Yaesu FT-857/897    Banks      SKIPPED: Banks not supported
 Yaesu FT-857/897 (U Detect      PASSED: All tests
 Yaesu FT-857/897 (U CopyAll     FAILED:<25>: Field `dtcs' is `23', expected `32'
 Yaesu FT-857/897 (U BruteForce  FAILED: Field `dtcs' is `23', expected `25'

---

chirp_devel mailing list chirp_devel@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_devel