Yes, you are correct. I'll submit a fix today. too much eggnog i guess lol interestingly it seems there is provision in the memory to support 128 channels. in fact i extended the memory and names arrays, then populated a few >100 channels and set the new mem ch A/B to one of these and it works just fine it will also increment downwards -- its not until you increment upwards or roll over the normal memory bounds of 1 - 99 where it locks you within this boundary. There is no other way of selecting >100. So its not really useable... Perhaps it was due to only having 2 digits on the channel indicator? the could have always gone hexidecimal on the leading digit to go into hundreds, but for whatever reason they decided to throwaway 20% of the memory capacity -- what a shame! Sent from Yahoo Mail for iPad

---

From: Jim Unroe <rock.unroe@gmail.com>;
To: Jens J. <kd4tjx@yahoo.com>;
Subject: Re: [chirp_devel] [uv-b5] additional settings #1315
Sent: Thu, Dec 26, 2013 11:13:46 AM

Jens, When Mem Chan (A)/(B) is set to 0 is the display will be in VFO mode regardless of the Radio Work Mode(A)/(B) setting. The user will be unable to switch the display to Channel mode. Jim On Thu, Dec 26, 2013 at 5:34 AM, Jim Unroe <rock.unroe@gmail.com> wrote: Jens, Shouldn't the ranges for these work channel numbers be from 1 to 99? The UV-B5 has no channel 0. Jim On Wed, Dec 25, 2013 at 1:04 PM, Jens J. <kd4tjx@yahoo.com> wrote: Merry Christmas! patch attached _______________________________________________ chirp_devel mailing list chirp_devel@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_devel Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers