Implementing get_bank(), set_bank(), and clear_bank() in the radio class adheres to the separation-of-concerns principle by adding a level of abstraction. The radio class "owns" the memory structure, so it's in charge of the details of how it associates a memory with a bank. The BankModel class is there for the UI. The UI only cares about the fact that a memory is associated with a bank, but couldn't care less how the association is recorded in the radio's memory.
BTW, did you really mean 0 through 21? Or, 0 through 20, or 1 through 21?
On 5/29/2023 12:38 PM, Joseph Scanlan wrote:
Why did you choose to implement get_bank(), set_bank(), and clear_bank() in the radio class instead of the bank model class?
I could add this to my description instead:
For example, with 4 banks, if we have bank capacity’s of [21, 4, 0, 3] then memories 0 through 21 belong to Bank 1, memories 22 through 25 belong to Bank 2, memories 26 through 28 belong to Bank 4, and the remaining memories don’t belong to any bank.With land mobile radios, the radio user can’t change much. The radio tech programs the radios. The typical ham will fill both roles.
When a tech uses the Icom software, they see a page for each bank and can add, delete, move, and edit frequencies in the bank. This gives the tech the ability to place channels in any order. They don’t see the entire list of memories at once.
On May 28, 2023, at 20:21, Craig Jones via chirp_devel chirp_devel@intrepid.danplanet.com wrote:
Do I understand correctly that you could add this to the description?
For example, if the banks[16] array contains [2,3,5,7,0,0,0,0,0,...] then that means that memory[0:2] belong to Bank A, memory[2:5] belong to Bank B, memory[5:10] to C, memory[10:17] to D, and memory[17:] aren't in any bank.If so, that's wild, with wacky implications:
- I don't see a logical location number in the mem struct, so that means the "Location Number" of every channel is constantly changing when you add/remove a channel to a bank?
- It also means the user can't control the order of the memory locations?
- At first, I was thinking that you would keep a cross-indexing array in your bank model which gets populated on the way in (download or file load) and interpreted on the way out (upload or save), but I guess you'll actually have to rearrange memory with every bank change if the UI is going to be able to keep up in real time.
- BTW, if my example is correct, the "capacity" is misleading. I'd change it to "current_count" or current_size
On 5/28/2023 2:55 PM, Joseph Scanlan wrote:
Here is my class description. Does it make at least a little sense to someone who hasn’t spent time with the driver?
""" The Icom land mobile bank model.
The radio stores bank capacity in an array of 16 bit, unsigned integers. There is no other mapping. This implies - memories in a bank are contiguous, - memories in a bank are in the order that they apear in the "memory" array, - each memory can only be in one bank, - all memories not in a bank are at the end of the "memory" array. Here, "memory" array refers to the struct in "MEM_FORMAT". “”"
Do all models look the same in the banks tab? This is what I see:
<Banks tab.png>
Thanks for the spelling correction.
On May 24, 2023, at 15:00, Craig Jones via chirp_devel chirp_devel@intrepid.danplanet.com wrote:
I was wondering what "capacity" meant. So, if that's just the count, where is the actual linkage between the bank and the memories? Anyway, the Anytone model I'm working on right now is the same (each mem is limited to one bank, or none):
classAnytoneBankModel(chirp_common.BankModel): """ The Anytone bank model, for the radios that support it, is that a memory channel can only belong to one bank at a time. There are 10 banks (A-J with no alternate names). The mapping is done in a block of bytes that correspond to the 750 memories (one byte per memory). The possible values are 0-9 (A-J) or 15 (x0F) for "off". """ def__init__(self, radio, name="Banks", num_banks=10, num_memories=750): super(AnytoneBankModel,self).__init__(radio,name) self._bank_bounds =range(num_banks) self._mem_bounds =range(1,num_memories +1) self._banks =[ chirp_common.Bank(self,i,string.ascii_uppercase[i]) fori inself._bank_bounds ] defget_num_mappings(self): returnlen(self._banks) defget_mappings(self): returnself._banks defadd_memory_to_mapping(self, memory, bank): self._radio.set_bank(memory.number,bank.get_index()) defremove_memory_from_mapping(self, memory, mapping): self._radio.clr_bank(memory.number) defget_mapping_memories(self, bank): """Returns a list of all memories assigned to the given bank""" memories =[] fori inself._mem_bounds: bank_index =self._radio.get_bank(i) ifbank_index isnotNoneandbank_index ==bank.get_index(): memories.append(self._radio.get_memory(i)) returnmemories defget_memory_mappings(self, memory): bank_index =self._radio.get_bank(memory.number) return[]ifbank_index isNoneelse[self._banks[bank_index]]
BTW, "scrabmler_code" is misspelled.
On 5/24/2023 1:52 PM, Joseph Scanlan wrote:
A memory can not be in more than one bank simultaneously.
A memory need not be in a bank.
Memories are stored sequentially starting from [0]. Each number in banks holds the count of memories in that bank. The count can be 0. So to find the start index of the first memory in a bank we have to sum the sizes of all previous banks.
On May 23, 2023, at 14:06, Craig Jones via chirp_develchirp_devel@intrepid.danplanet.com wrote:
I just went through that myself. The first two questions: 1. Can one memory belong to multiple banks simultaneously? 2. Does every memory have to belong to at least one bank? The answers determine which base class you use for the bank model.
You need to implement a bank model so that Chirp can inquire, for example, which memories are in bank C?
You also need to implement get_bank(), set_bank(), clear_bank() for a memory (in the radio class), which will be called by the bank model.
Hopefully, that's enough to get you started.
On 5/23/2023 1:47 PM, Joseph Scanlan via chirp_devel wrote: > Does anyone have an example that will help me understand MemoryMapping, MappingModel, Bank, and BankModel classes? I’m working on a driver for the Icom IC-F520 land mobile radio. > > The F520 has 256 channels and 16 banks. This is how they look in MEM_FORMAT: > > struct { > u16 capacity; > } banks[16]; > > > struct { > char name[10]; > u32 inhibit:1, > freq_rx:31; > u32 inhibit_tx:1, > freq_tx:31; > u8 rx_tone_off:1, > rx_tone_digital:1, > unk01:6; > u8 rx_tone; > u8 tx_tone_off:1, > tx_tone_digital:1, > unk02:6; > u8 tx_tone; > u8 unk03:3, > tot_on:1, > lockout_repeater:1, > lockout_busy:1, > power_rf:2; > u8 log_in:2, > log_out:2, > unk04:1, > text_on:1, > unk05:1, > two_tone_unk1:1; > u8 unk06:4, > two_tone_unk2:2 > auto_reset_a:1, > unk07:1; > u8 narrow:1, > scrambler_on:1, > scrambler_inhibit:1, > compander_on:1, > unk08:4; > u8 unk09; > u8 scrabmler_code; > u16 unk10; > u16 unk11; > u8 unk12:6, > two_tone_index:2; > } memory[256]; > _______________________________________________ > chirp_devel mailing list > chirp_devel@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
> Developer docs:http://chirp.danplanet.com/projects/chirp/wiki/Developers
This email has been checked for viruses by AVG antivirus software. www.avg.com _______________________________________________ chirp_devel mailing list chirp_devel@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_devel Developer docs:http://chirp.danplanet.com/projects/chirp/wiki/Developers
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient Virus-free.www.avg.com http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient
x-msg://1/#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2 _______________________________________________ chirp_devel mailing list chirp_devel@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_devel Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
chirp_devel mailing list chirp_devel@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_devel Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers