On Sat, May 31, 2014 at 3:58 PM, Build System donotreply@danplanet.com wrote:
Tested changes:
[Jim Unroe rock.unroe@gmail.com] [UV-82] Add Additional Settings and Expand Frequency Range [uv5r.py]
update settings structure add new UV-82 basetype add check for new firmware version string add new settings
- VFO/MR Switching (UV-82C only)
- Single PTT (UV-82C only)
expand VHF frequency range to match the factory shipped frequency range
#1651
[Marco Filippi iz3gme.marco@gmail.com] [ic9x] Fix communication problems with Icom IC91/92
Icf file importer was registered in directory, that's useless and overwrites actual ic9x driver
Fix #1649
[Jim Unroe rock.unroe@gmail.com] [KT-980HP] Bug with High/Mid/Low TX Power Levels
Edit 'settings' structure 'lowpower' expanded to 2 bits to support 3 power levels
Edit 'vfoa' and 'vfob' structures Add 'txpower3' to support relocated parameters
Add 'UV5R_POWER_LEVELS'
Edit 'def get_memory(self, number):' Updated code for 'mem.power'
Edit 'def set_memory(self, number):' Updated code for '_mem.lowpower'
Edit "Work Mode Settings" menu Updated settings for VFO A and VFO B TX Power Level settings
Updated IntekKT980Radio class
#1627
[Dan Drogichen chirp.cordless@xoxy.net] [FT-60] Correct watt values for power levels - Fixes #1595
Change from 5.0/2.5/1.0 to 5.0/2.0/0.5 Watts, per the manual.
#1595
Results: TOTAL : 342 FAILED : 0 SKIPPED: 38 PASSED : 304 CRASHED: 0 Patch 'tip' is OK ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success
I don't see the expected daily build. Did I miss it?
Jim KC9HI