I've decided to try my hand at this port.

I found the run_tests.py file in the tests folder, and am going through everything in there to ensure it doesn't crash or fail. I have the latest pull from Mercury, and am running all the tests there, too, to ensure they don't fail (or crash) in that version - I bet they don't.

Right now, I've gotten to the Wouxun radios, and am having an issue with the mode_password and reset_password settings. I've gotten around the problem, but I think there might be a better way to do it. The way I've currently done it is in set_settings, where it calls setattr(obj, setting, element.value) I've tested element.value to see if it is a dict_values instance, and if it is, I create a list out of element.value before calling setattr.

I'm wondering, however, if it wouldn't be better to make the mode_password and reset_password lists right off the bat, however?

Joe
KI5LST


On 12/20/2020 9:57 PM, Matthew Poletiek via chirp_devel wrote:
Hi All,

I've made a lot of progress on getting the latest py3 branch working across multiple platforms. I'm maintaining all my working changes here for now: https://github.com/mpoletiek/py3-CHIRP

I've even made a list of supported devices and am marking the ones I've personally tested: https://github.com/mpoletiek/py3-CHIRP/blob/main/RADIOS.md

Currently I only own a BF-F8HP so I've marked all the Radios that use that driver `TESTED`.

I've been playing around with Tox and testing the other drivers that way too. With a few changes I was able to get it working and run every test against every driver. A lot of them passed every test just fine, but a lot of them are failing here and there.

As expected the debug.log is quite long and I figured I'd go through the drivers one by one that way, but the recommended syntax for doing that doesn't seem to work as expected.

https://chirp.danplanet.com/projects/chirp/wiki/DevelopersProcess

`tox -e driver -- -d Icom_IC-2820H`

Running this command gives me the following in a Python3.7 environment:

`ERROR: MISSING test execution (tx) nodes: please specify --tx`


When I add '-n 2' or `--tx popen//python=python3.7` to the pytest command it exits with `code: 5 (no tests run)`


Anyone familiar enough with tox to help me out with this?


There's also a py3driver env setup in the tox.ini file, but that doesn't work either. 


Thanks,
-------------------------------------------
Matthew Poletiek
303.810.9082



_______________________________________________
chirp_devel mailing list
chirp_devel@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
-- 
Joe Pizzi