# HG changeset patch # User Nicolas Pike nicolas.jon.pike@gmail.com # Date 1520895999 0 # Mon Mar 12 23:06:39 2018 +0000 # Node ID c0dd892751c37b7049d77fe400909c4ada3630c5 # Parent d8e76240546ea505b065854afb9c1da11f8b2070 [FT-70] Banks support fixes for New Model #5329 Some pep8 fixes to Sorry.
diff -r d8e76240546e -r c0dd892751c3 chirp/drivers/ft70.py --- a/chirp/drivers/ft70.py Sun Mar 11 14:34:13 2018 -0400 +++ b/chirp/drivers/ft70.py Mon Mar 12 23:06:39 2018 +0000 @@ -62,6 +62,8 @@ // MYCALL and Opening Message errors if not 10 characters // Values greater than one sometimes stored as whole bytes, these need to be refactored into bit fields // to prevent accidental overwriting of adjacent values +// Bank Name length not checked on gui input - but first 6 characters are saved correctly. +// Extended characters entered as bank names on radio are corrupted in Chirp
// Missing // 50 SCV.WTH Set the VFO scan frequency range. BAND / ALL - NOT FOUND @@ -127,7 +129,7 @@ u8 unknown2_1; u8 mic_gain; // 31 MCGAIN Adjust the microphone gain level u8 unknown2_3; - u8 dw_interval; // 21 DW INT Set the priority memory channel monitoring interval during Dual Receive. 0.1S - 5.0S - 10.0S + u8 dw_interval; // 21 DW INT Set the priority memory ch mon int during Dual RX 0.1S-5.0S-10.0S u8 ptt_delay; // 42 PTT.DLY Set the PTT delay time. OFF / 20 MS / 50 MS / 100 MS / 200 MS u8 rx_save; // 48 RX.SAVE Set the battery save time. OFF / 0.2 S - 60.0 S u8 scan_restart; // 53 SCN.STR Set the scanning restart time. 0.1 S - 2.0 S - 10.0 S @@ -136,7 +138,7 @@ u8 unknown4[5]; u8 tot; // 56 TOT Set the transmission timeout timer u8 unknown5[3]; // 26 - u8 vfo_mode:1, // 60 VFO.MOD Set the frequency setting range in the VFO mode by DIAL knob. ALL / BAND + u8 vfo_mode:1, // 60 VFO.MOD Set freq setting range in the VFO mode by DIAL knob. ALL / BAND unknown7:1, scan_lamp:1, // 51 SCN.LMP Set the scan lamp ON or OFF when scanning stops On/Off unknown8:1, @@ -160,7 +162,7 @@ password:1, // Placeholder location home_rev:1, // 26 HOME/REV Select the function of the [HOME/REV] key. moni:1; // 32 Mon/T-Call Select the function of the [MONI/T-CALL] switch. - u8 gm_interval:4, // 30 // 25 GM INT Set the transmission interval of digital GM information. OFF / NORMAL / LONG + u8 gm_interval:4, // 30 // 25 GM INT Set tx interval of digital GM information. OFF / NORMAL / LONG unknown10:4; u8 unknown11; u8 unknown12:1, @@ -170,7 +172,7 @@ home_vfo:1, // 27 HOME->VFO Turn transfer VFO to the Home channel ON or OFF. unknown12_6:1, unknown12_7:1, - dw_rt:1; // 32 // 23 DW RVT Turn the "Priority Channel Revert" feature ON or OFF during Dual Receive. + dw_rt:1; // 32 // 23 DW RVT Turn "Priority Channel Revert" feature ON or OFF during Dual Rx. u8 unknown33; u8 unknown34; u8 unknown35; @@ -220,51 +222,7 @@ u8 unknown[48]; u8 unknown1[16]; } vfo_backup_info_1; - - #seekto 0x064a; // Unknown (From FT1D) For reference only - struct { - u8 unknown0[4]; - u8 frequency_band; - u8 unknown1:6, - manual_or_mr:2; - u8 unknown2:7, - mr_banks:1; - u8 unknown3; - u16 mr_index; - u16 bank_index; - u16 bank_enable; - u8 unknown4[5]; - u8 unknown5:6, - power:2; // 3 - High, 2 - Mid, 1 - Low - u8 unknown6:4, - tune_step:4; - u8 unknown7:6, - duplex:2; - u8 unknown8:6, - tone_mode:2; - u8 unknown9:2, - tone:6; - u8 unknown10; - u8 unknown11:6, - mode:2; - bbcd freq0[4]; - bbcd offset_freq[4]; - u8 unknown12[2]; - char label[16]; - u8 unknown13[6]; - bbcd band_lower[4]; - bbcd band_upper[4]; - bbcd rx_freq[4]; - u8 unknown14[22]; - bbcd freq1[4]; - u8 unknown15[11]; - u8 unknown16:3, - volume:5; - u8 unknown17[18]; - u8 active_menu_item; - u8 checksum; - } vfo_info[6]; - + #seekto 0x047e; struct { u8 unknown1; @@ -273,7 +231,7 @@ struct { char padded_string[6]; // 36 OPN.MSG Select MSG then key vm to edit it } message; - } opening_message; // 36 OPN.MSG Select the Opening Message when the transceiver is ON. OFF / MSG / DC + } opening_message; // 36 OPN.MSG Select the Opening Message when transceiver is ON. OFF/MSG/DC
#seekto 0x094a; // DTMF Memories struct { @@ -318,7 +276,7 @@ standby_beep:1; // 07 BEP.STB Standby Beep in the digital C4FM mode. On/Off u8 unknown3; u8 unknown4:6, - gm_ring:2; // 24 GM RNG Select the beep option while receiving digital GM information. OFF / IN RNG /ALWAYS + gm_ring:2; // 24 GM RNG Select beep option while rx digital GM info. OFF/IN RNG/ALWAYS u8 unknown5; u8 rx_dg_id; // RX DG-ID Long Press Mode Key, Mode Key to select, Dial u8 tx_dg_id; // TX DG-ID Long Press Mode Key, Dial @@ -456,48 +414,6 @@ _members = self._radio._memobj.bank_members[bank.index] return set([int(ch) + 1 for ch in _members.channel if ch != 0xFFFF])
- def update_vfo(self): - chosen_bank = [None, None] - chosen_mr = [None, None] - - flags = self._radio._memobj.flag - - # Find a suitable bank and MR for VFO A and B. # From FT1D for ref only - for bank in self.get_mappings(): - for channel in self._channel_numbers_in_bank(bank): - chosen_bank[0] = bank.index - chosen_mr[0] = channel - if not flags[channel].nosubvfo: - chosen_bank[1] = bank.index - chosen_mr[1] = channel - break - if chosen_bank[1]: - break - - for vfo_index in (0, 1): # From FT1D for ref only - # 3 VFO info structs are stored as 3 pairs of (master, backup) - vfo = self._radio._memobj.vfo_info[vfo_index * 2] - vfo_bak = self._radio._memobj.vfo_info[(vfo_index * 2) + 1] - - if vfo.checksum != vfo_bak.checksum: - LOG.warn("VFO settings are inconsistent with backup") - else: - if ((chosen_bank[vfo_index] is None) and (vfo.bank_index != - 0xFFFF)): - LOG.info("Disabling banks for VFO %d" % vfo_index) - vfo.bank_index = 0xFFFF - vfo.mr_index = 0xFFFF - vfo.bank_enable = 0xFFFF - elif ((chosen_bank[vfo_index] is not None) and - (vfo.bank_index == 0xFFFF)): - LOG.info("Enabling banks for VFO %d" % vfo_index) - vfo.bank_index = chosen_bank[vfo_index] - vfo.mr_index = chosen_mr[vfo_index] - vfo.bank_enable = 0x0000 - vfo_bak.bank_index = vfo.bank_index - vfo_bak.mr_index = vfo.mr_index - vfo_bak.bank_enable = vfo.bank_enable - def _update_bank_with_channel_numbers(self, bank, channels_in_bank): _members = self._radio._memobj.bank_members[bank.index] if len(channels_in_bank) > len(_members.channel): @@ -518,8 +434,6 @@ _bank_used = self._radio._memobj.bank_used[bank.index] _bank_used.in_use = 0x06
- self.update_vfo() - def remove_memory_from_mapping(self, memory, bank): channels_in_bank = self._channel_numbers_in_bank(bank) try: @@ -533,8 +447,6 @@ _bank_used = self._radio._memobj.bank_used[bank.index] _bank_used.in_use = 0xFFFF
- self.update_vfo() - def get_mapping_memories(self, bank): memories = [] for channel in self._channel_numbers_in_bank(bank): @@ -704,16 +616,6 @@ mem.skip = flag.pskip and "P" or flag.skip and "S" or "" mem.name = self._decode_label(_mem)
- mem.extra = RadioSettingGroup("extra", "Extra Settings") - - rs = RadioSetting("display_tag", "Display Name/Frequency", - RadioSettingValueBoolean(_mem.display_tag)) - mem.extra.append(rs) - - rs = RadioSetting("ams", "AMS", - RadioSettingValueBoolean(_mem.ams)) - mem.extra.append(rs) - return mem
def _decode_label(self, mem): @@ -726,7 +628,7 @@ # We only speak english here in chirpville return [0x00, 0x00]
- def _decode_power_level(self, mem): # 3 High 2 Mid 1 Low + def _decode_power_level(self, mem): # 3 High 2 Mid 1 Low return POWER_LEVELS[3 - mem.power]
def _encode_power_level(self, mem): @@ -880,25 +782,6 @@ rs = RadioSetting("opening_message.flag", "Opening Msg Mode", val) menu.append(rs)
- val = RadioSettingValueString(0, 6, str(opening_message.message.padded_string).rstrip("\xFF")) - rs = RadioSetting("opening_message.message.padded_string", "Opening Message", val) - rs.set_apply_callback(self.apply_ff_padded_string, opening_message.message) - menu.append(rs) - - # Indicates the current temperature inside the transceiver. - # Displays the internal temperature sensor F or C. - # Press the [V/M] key to toggle the measurement units between F or C. - # In this setting, press and hold the [F] key to return to normal operation. - - # Only seems to change the radio display, back to C when radio powered off - - # first_settings = self._memobj.first_settings - # val = RadioSettingValueList( - # self._TEMP_CF, - # self._TEMP_CF[first_settings.temp_cf]) - # rs = RadioSetting("first_settings.temp_cf", "Temperature unit", val) - # menu.append(rs) - return menu
def _get_config_settings(self): @@ -955,16 +838,6 @@ rs = RadioSetting("scan_settings.busy_led", "Busy LED", val) menu.append(rs)
- # 40 Password Turn the password function ON or OFF. - - # val = RadioSettingValueList( - # self._OFF_ON, - # self._OFF_ON[scan_settings.password]) - # rs = RadioSetting("scan_settings.password", "Password", val) - # menu.append(rs) - - # 41 PSWDWT Input the password. - # 26 HOME/REV Select the function of the [HOME/REV] key.
val = RadioSettingValueList( @@ -1037,30 +910,6 @@ rs = RadioSetting("scan_settings.tot", "Transmit Timeout (TOT)", val) menu.append(rs)
- # P1 Set Mode Items to the Programmable Key - # 1-12 Maps directly to setting - # 14 setting 13 - # 15-17 setting 14 - 16 - # 24 setting 17 - # 26-31 setting 18 - 23 - # 33-40 setting 24 - 31 - - # Further checking required - - # val = RadioSettingValueList( - # self._SET_MODE, - # self._SET_MODE[scan_settings.prog_key1]) - # rs = RadioSetting("scan_settings.prog_key1", "P1 Key", val) - # menu.append(rs) - - # P2 Set Mode Items to the Programmable Key - - # val = RadioSettingValueList( - # self._SET_MODE, - # self._SET_MODE[scan_settings.prog_key2]) - # rs = RadioSetting("scan_settings.prog_key2", "P2 Key", val) - # menu.append(rs) - # 31 MCGAIN Adjust the microphone gain level
val = RadioSettingValueList( @@ -1087,28 +936,11 @@ rs = RadioSetting("squelch_settings.squelch", "Squelch", val) menu.append(rs)
- # Power Level F key, TX PO, Dial to adjust power level - - # scan_settings_2 = self._memobj.scan_settings_2 - # val = RadioSettingValueList( - # self._VOLUME, - # self._VOLUME[scan_settings_2.volume]) - # rs = RadioSetting("scan_settings_2.volume", "Volume", val) - # menu.append(rs) - return menu
def _get_digital_settings(self): menu = RadioSettingGroup("digital_settings", "Digital")
- # 63 MYCALL Set the call sign. - - my_call = self._memobj.my_call - val = RadioSettingValueString(0, 10, str(my_call.padded_string).rstrip("\xFF")) - rs = RadioSetting("my_call.padded_string", "My Call", val) - rs.set_apply_callback(self.apply_ff_padded_string, my_call) - menu.append(rs) - # Short Press AMS button AMS TX Mode
digital_settings = self._memobj.digital_settings @@ -1248,21 +1080,6 @@
# 50 SCV.WTH Set the VFO scan frequency range. BAND / ALL - NOT FOUND!
- # scan_settings_1 = self._memobj.scan_settings_1 - # val = RadioSettingValueList( - # self._VFO_SCAN_MODE, - # self._VFO_SCAN_MODE[scan_settings_1.vfo_scan_width]) - # rs = RadioSetting("scan_settings_1.vfo_scan_width", "VFO Scan Width", val) - # menu.append(rs) - - # 49 SCM.WTH Set the memory scan frequency range. ALL / BAND - NOT FOUND! - - # val = RadioSettingValueList( - # self._MEMORY_SCAN_MODE, - # self._MEMORY_SCAN_MODE[scan_settings_1.memory_scan_width]) - # rs = RadioSetting("scan_settings_1.memory_scan_width", "Memory Scan Width", val) - # menu.append(rs) - # Scan Resume Section
# 52 SCN.RSM Configure the scan stop mode settings. 2.0 S - 5.0 S - 10.0 S / BUSY / HOLD @@ -1356,4 +1173,3 @@ rawval = setting.value.get_value() val = 0 if cls._DIG_POP_UP.index(rawval) == 0 else cls._DIG_POP_UP.index(rawval) + 9 obj.digital_popup = val -