April 2016 - Developers - lists.chirpmyradio.com

Re: [chirp_devel] [PATCH][BTECH] Bug fix about radios resetting on the download, fixes #3015
by M.Sc. Pavel Milanes Costa 09 Apr '16

09 Apr '16

El 06/04/16 a las 10:27, Jim Unroe escribió: >> Pavel: No, I have confirmation by the first ID that this radio is the model I know >> it's; but the OEM reads the second ID of the radio and we are copying this >> behavior... and now I realize that maybe we don't need to do that, as we >> know for sure that this is the radio it's. >> >> Jim, we will test in that way this night. >> > Sure. > > [.....] > > I don't think we have to exactly follow the OEM software in this > regard either. It just adds a complication that seems to me as not > being necessary. > > Jim > After a few test this path is a no go. When you ignore the read of the high mem zone that contains the second ID, the radio answer to the first block read with a block without the starting ACK (neither good or bad, just not ACK at all!) and add a 0xf0 at the end of the block, then stop responding. So maybe the radio expects the read of this high mem block to move on and we have to follow the OEM software on this. Checking the timing on the serial logs (portmon in crono mode) for the affected radios, the patch for a smaller serial timeout makes sense, we are doing things now (with the lower serial timeout) just like the OEM does, and it works. The other mentioned way of a short read and then a serial flush is a more complicated version of the one in the actual patch, so I think you will reject it also. Dan, sorry for my insistence with this patch. I'm a amateur in python programming with less than a year of experience (I have a kind of experience on other languages), this is my first big python project and I will like to test the way you mention about a buffer, but I have not a reference for doing it. I was testing a kind of buffer on other context and after a few tests and deep thinking it's a no go here for a few reasons, can you please take a time and guide me or elaborate more on the buffer version concept for me to understand it? Cheers Pavel.

3 2

[chirp_devel] [PATCH][BTECH] Bug fix about radios resetting on the download, fixes #3015
by M.Sc. Pavel Milanes Costa 09 Apr '16

09 Apr '16

Hi to all, busy weekend and week ahead here, so patching will be slow on this side. Patch comments: The radios with the second ID can run into a conditions in which the timeouts concatenates and get the radios resets after ident and before download. Affected models QYT KT 8900 (& the clone JT-6188) & BTECH 2501+220 so far. Setting a temporal lower timeout in the second ID part has proved to fix this issue. 73 Pavel.

4 10

[chirp_devel] [PATCH][BTECH] Bug fix about radios resetting on the download, fixes #3015
by M.Sc. Pavel Milanes Costa 05 Apr '16

05 Apr '16

The radios with the second ID can run into a conditions in which the timeouts concatenates and get the radios resets after ident and before download. Affected models QYT KT 8900 & BTECH 2501+220 so far. Setting a temporal lower timeout in the second ID part has proved to fix this issue.

1 0

[chirp_devel] [PATCH] [FT2900] Add support for settings. Fix #2867
by Richard Cochran 02 Apr '16

02 Apr '16

# HG changeset patch # User Richard Cochran <ag6qr(a)sonic.net> # Date 1456721059 28800 # Sun Feb 28 20:44:19 2016 -0800 # Node ID 432300d60fae4c517c8f98f3d52aef115c9a96e8 # Parent 1c398653986fb3e0a50bfbbc58f1a2f5c9ab2b95 [FT2900] Add support for settings. Fix #2867 This submission adds support for settings to the ft-2900/ft-1900 driver. Special thanks to Chris Fosnight for getting a start at the settings code. He gave his code to me (Rich Cochran), and I finished implementing more settings, and tested both reading and writing of all the settings. Settings are grouped into categories according to the manual, pp 72-73. Issue #2867 diff -r 1c398653986f -r 432300d60fae chirp/drivers/ft2900.py --- a/chirp/drivers/ft2900.py Sat Feb 27 17:33:04 2016 -0800 +++ b/chirp/drivers/ft2900.py Sun Feb 28 20:44:19 2016 -0800 @@ -1,6 +1,7 @@ # Copyright 2011 Dan Smith <dsmith(a)danplanet.com> # # FT-2900-specific modifications by Richard Cochran, <ag6qr(a)sonic.net> +# Initial work on settings by Chris Fosnight, <chris.fosnight(a)gmail.com> # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -21,6 +22,8 @@ from chirp import util, memmap, chirp_common, bitwise, directory, errors from chirp.drivers.yaesu_clone import YaesuCloneModeRadio +from chirp.settings import RadioSetting, RadioSettingGroup, \ + RadioSettingValueList, RadioSettingValueString, RadioSettings from textwrap import dedent @@ -164,6 +167,87 @@ _send(radio.pipe, chr(cs & 0xFF)) MEM_FORMAT = """ +#seekto 0x0080; +struct { + u8 apo; + u8 arts_beep; + u8 bell; + u8 dimmer; + u8 cw_id_string[16]; + u8 cw_trng; + u8 x95; + u8 x96; + u8 x97; + u8 int_cd; + u8 int_set; + u8 x9A; + u8 x9B; + u8 lock; + u8 x9D; + u8 mic_gain; + u8 open_msg; + u8 openMsg_Text[6]; + u8 rf_sql; + u8 unk:6, + pag_abk:1, + unk:1; + u8 pag_cdr_1; + u8 pag_cdr_2; + u8 pag_cdt_1; + u8 pag_cdt_2; + u8 prog_p1; + u8 xAD; + u8 prog_p2; + u8 xAF; + u8 prog_p3; + u8 xB1; + u8 prog_p4; + u8 xB3; + u8 resume; + u8 tot; + u8 unk:1, + cw_id:1, + unk:1, + ts_speed:1, + ars:1, + unk:2, + dtmf_mode:1; + u8 unk:1, + ts_mut:1 + wires_auto:1, + busy_lockout:1, + edge_beep:1, + unk:3; + u8 unk:2, + s_search:1, + unk:2, + cw_trng_units:1, + unk:2; + u8 dtmf_speed:1, + unk:2, + arts_interval:1, + unk:1, + inverted_dcs:1, + unk:1, + mw_mode:1; + u8 unk:2, + wires_mode:1, + wx_alert:1, + unk:1, + wx_vol_max:1, + revert:1, + unk:1; + u8 vfo_scan; + u8 scan_mode; + u8 dtmf_delay; + u8 beep; + u8 xBF; +} settings; + +#seekto 0x00d0; + u8 passwd[4]; + u8 mbs; + #seekto 0x00c0; struct { u16 in_use; @@ -175,6 +259,11 @@ #seekto 0x00f0; u8 curChannelMem[20]; +#seekto 0x1e0; +struct { + u8 dtmf_string[16]; +} dtmf_strings[10]; + #seekto 0x0127; u8 curChannelNum; @@ -424,6 +513,7 @@ rf.has_dtcs_polarity = False rf.has_bank = True rf.has_bank_names = True + rf.has_settings = True rf.valid_tuning_steps = STEPS rf.valid_modes = MODES @@ -620,6 +710,496 @@ LOG.debug("encoded mem\n%s\n" % (util.hexprint(_mem.get_raw()[0:20]))) + def get_settings(self): + _settings = self._memobj.settings + _dtmf_strings = self._memobj.dtmf_strings + _passwd = self._memobj.passwd + + repeater = RadioSettingGroup("repeater", "Repeater Settings") + ctcss = RadioSettingGroup("ctcss", "CTCSS/DCS/EPCS Settings") + arts = RadioSettingGroup("arts", "ARTS Settings") + mbls = RadioSettingGroup("banks", "Memory Settings") + scan = RadioSettingGroup("scan", "Scan Settings") + dtmf = RadioSettingGroup("dtmf", "DTMF Settings") + wires = RadioSettingGroup("wires", "WiRES(tm) Settings") + switch = RadioSettingGroup("switch", "Switch/Knob Settings") + disp = RadioSettingGroup("disp", "Display Settings") + misc = RadioSettingGroup("misc", "Miscellaneous Settings") + + setmode = RadioSettings(repeater, ctcss, arts, mbls, scan, + dtmf, wires, switch, disp, misc) + + # numbers and names of settings refer to the way they're + # presented in the set menu, as well as the list starting on + # page 74 of the manual + + # 1 APO + opts = ["Off", "30 Min", "1 Hour", "3 Hour", "5 Hour", "8 Hour"] + misc.append( + RadioSetting( + "apo", "Automatic Power Off", + RadioSettingValueList(opts, opts[_settings.apo]))) + + # 2 AR.BEP + opts = ["Off", "In Range", "Always"] + arts.append( + RadioSetting( + "arts_beep", "ARTS Beep", + RadioSettingValueList(opts, opts[_settings.arts_beep]))) + + # 3 AR.INT + opts = ["15 Sec", "25 Sec"] + arts.append( + RadioSetting( + "arts_interval", "ARTS Polling Interval", + RadioSettingValueList(opts, opts[_settings.arts_interval]))) + + # 4 ARS + opts = ["Off", "On"] + repeater.append( + RadioSetting( + "ars", "Automatic Repeater Shift", + RadioSettingValueList(opts, opts[_settings.ars]))) + + # 5 BCLO + opts = ["Off", "On"] + misc.append(RadioSetting( + "busy_lockout", "Busy Channel Lock-Out", + RadioSettingValueList(opts, opts[_settings.busy_lockout]))) + + # 6 BEEP + opts = ["Off", "Key+Scan", "Key"] + switch.append(RadioSetting( + "beep", "Enable the Beeper", + RadioSettingValueList(opts, opts[_settings.beep]))) + + # 7 BELL + opts = ["Off", "1", "3", "5", "8", "Continuous"] + ctcss.append(RadioSetting("bell", "Bell Repetitions", + RadioSettingValueList(opts, opts[_settings.bell]))) + + # 8 BNK.LNK + for i in range(0, 8): + opts = ["Off", "On"] + mbs = (self._memobj.mbs >> i) & 1 + rs = RadioSetting("mbs%i" % i, "Bank %s Scan" % (i + 1), + RadioSettingValueList(opts, opts[mbs])) + + def apply_mbs(s, index): + if int(s.value): + self._memobj.mbs |= (1 << index) + else: + self._memobj.mbs &= ~(1 << index) + rs.set_apply_callback(apply_mbs, i) + mbls.append(rs) + + # 9 BNK.NM - A per-bank attribute, nothing to do here. + + # 10 CLK.SFT - A per-channel attribute, nothing to do here. + + # 11 CW.ID + opts = ["Off", "On"] + arts.append(RadioSetting("cw_id", "CW ID Enable", + RadioSettingValueList(opts, opts[_settings.cw_id]))) + + cw_id_text = "" + for i in _settings.cw_id_string: + try: + cw_id_text += CHARSET[i & 0x7F] + except IndexError: + if i != 0xff: + LOG.debug("unknown char index in cw id: %x " % (i)) + + val = RadioSettingValueString(0, 16, cw_id_text, True) + val.set_charset(CHARSET + "abcdefghijklmnopqrstuvwxyz") + rs = RadioSetting("cw_id_string", "CW Identifier Text", val) + + def apply_cw_id(s): + str = s.value.get_value().upper().rstrip() + mval = "" + mval = [chr(CHARSET.index(x)) for x in str] + for x in range(len(mval), 16): + mval.append(chr(0xff)) + for x in range(0, 16): + _settings.cw_id_string[x] = ord(mval[x]) + rs.set_apply_callback(apply_cw_id) + arts.append(rs) + + # 12 CWTRNG + opts = ["Off", "4WPM", "5WPM", "6WPM", "7WPM", "8WPM", "9WPM", + "10WPM", "11WPM", "12WPM", "13WPM", "15WPM", "17WPM", + "20WPM", "24WPM", "30WPM", "40WPM"] + misc.append(RadioSetting("cw_trng", "CW Training", + RadioSettingValueList(opts, opts[_settings.cw_trng]))) + + # todo: make the setting of the units here affect the display + # of the speed. Not critical, but would be slick. + opts = ["CPM", "WPM"] + misc.append(RadioSetting("cw_trng_units", "CW Training Units", + RadioSettingValueList(opts, + opts[_settings.cw_trng_units]))) + + # 13 DC VLT - a read-only status, so nothing to do here + + # 14 DCS CD - A per-channel attribute, nothing to do here + + # 15 DCS.RV + opts = ["Disabled", "Enabled"] + ctcss.append(RadioSetting( + "inverted_dcs", + "\"Inverted\" DCS Code Decoding", + RadioSettingValueList(opts, + opts[_settings.inverted_dcs]))) + + # 16 DIMMER + opts = ["Off"] + ["Level %d" % (x) for x in range(1, 11)] + disp.append(RadioSetting("dimmer", "Dimmer", + RadioSettingValueList(opts, + opts[_settings + .dimmer]))) + + # 17 DT.A/M + opts = ["Manual", "Auto"] + dtmf.append(RadioSetting("dtmf_mode", "DTMF Autodialer", + RadioSettingValueList(opts, + opts[_settings + .dtmf_mode]))) + + # 18 DT.DLY + opts = ["50 ms", "250 ms", "450 ms", "750 ms", "1000 ms"] + dtmf.append(RadioSetting("dtmf_delay", "DTMF Autodialer Delay Time", + RadioSettingValueList(opts, + opts[_settings + .dtmf_delay]))) + + # 19 DT.SET + for memslot in range(0, 10): + dtmf_memory = "" + for i in _dtmf_strings[memslot].dtmf_string: + if i != 0xFF: + try: + dtmf_memory += CHARSET[i] + except IndexError: + LOG.debug("unknown char index in dtmf: %x " % (i)) + + val = RadioSettingValueString(0, 16, dtmf_memory, True) + val.set_charset(CHARSET + "abcdef") + rs = RadioSetting("dtmf_string_%d" % memslot, + "DTMF Memory %d" % memslot, val) + + def apply_dtmf(s, i): + LOG.debug("applying dtmf for %x\n" % i) + str = s.value.get_value().upper().rstrip() + LOG.debug("str is %s\n" % str) + mval = "" + mval = [chr(CHARSET.index(x)) for x in str] + for x in range(len(mval), 16): + mval.append(chr(0xff)) + for x in range(0, 16): + _dtmf_strings[i].dtmf_string[x] = ord(mval[x]) + rs.set_apply_callback(apply_dtmf, memslot) + dtmf.append(rs) + + # 20 DT.SPD + opts = ["50 ms", "100 ms"] + dtmf.append(RadioSetting("dtmf_speed", + "DTMF Autodialer Sending Speed", + RadioSettingValueList(opts, + opts[_settings. + dtmf_speed]))) + + # 21 EDG.BEP + opts = ["Off", "On"] + mbls.append(RadioSetting("edge_beep", "Band Edge Beeper", + RadioSettingValueList(opts, + opts[_settings. + edge_beep]))) + + # 22 INT.CD + opts = ["DTMF %X" % (x) for x in range(0, 16)] + wires.append(RadioSetting("int_cd", "Access Number for WiRES(TM)", + RadioSettingValueList(opts, opts[_settings.int_cd]))) + + # 23 ING MD + opts = ["Sister Radio Group", "Friends Radio Group"] + wires.append(RadioSetting("wires_mode", + "Internet Link Connection Mode", + RadioSettingValueList(opts, + opts[_settings. + wires_mode]))) + + # 24 INT.A/M + opts = ["Manual", "Auto"] + wires.append(RadioSetting("wires_auto", "Internet Link Autodialer", + RadioSettingValueList(opts, + opts[_settings + .wires_auto]))) + # 25 INT.SET + opts = ["F%d" % (x) for x in range(0, 10)] + + wires.append(RadioSetting("int_set", "Memory Register for " + "non-WiRES Internet", + RadioSettingValueList(opts, + opts[_settings + .int_set]))) + + # 26 LOCK + opts = ["Key", "Dial", "Key + Dial", "PTT", + "Key + PTT", "Dial + PTT", "All"] + switch.append(RadioSetting("lock", "Control Locking", + RadioSettingValueList(opts, + opts[_settings + .lock]))) + + # 27 MCGAIN + opts = ["Level %d" % (x) for x in range(1, 10)] + misc.append(RadioSetting("mic_gain", "Microphone Gain", + RadioSettingValueList(opts, + opts[_settings + .mic_gain]))) + + # 28 MEM.SCN + opts = ["Tag 1", "Tag 2", "All Channels"] + rs = RadioSetting("scan_mode", "Memory Scan Mode", + RadioSettingValueList(opts, + opts[_settings + .scan_mode - 1])) + # this setting is unusual in that it starts at 1 instead of 0. + # that is, index 1 corresponds to "Tag 1", and index 0 is invalid. + # so we create a custom callback to handle this. + + def apply_scan_mode(s): + myopts = ["Tag 1", "Tag 2", "All Channels"] + _settings.scan_mode = myopts.index(s.value.get_value()) + 1 + rs.set_apply_callback(apply_scan_mode) + mbls.append(rs) + + # 29 MW MD + opts = ["Lower", "Next"] + mbls.append(RadioSetting("mw_mode", "Memory Write Mode", + RadioSettingValueList(opts, + opts[_settings + .mw_mode]))) + + # 30 NM SET - This is per channel, so nothing to do here + + # 31 OPN.MSG + opts = ["Off", "DC Supply Voltage", "Text Message"] + disp.append(RadioSetting("open_msg", "Opening Message Type", + RadioSettingValueList(opts, + opts[_settings. + open_msg]))) + + openmsg = "" + for i in _settings.openMsg_Text: + try: + openmsg += CHARSET[i & 0x7F] + except IndexError: + if i != 0xff: + LOG.debug("unknown char index in openmsg: %x " % (i)) + + val = RadioSettingValueString(0, 6, openmsg, True) + val.set_charset(CHARSET + "abcdefghijklmnopqrstuvwxyz") + rs = RadioSetting("openMsg_Text", "Opening Message Text", val) + + def apply_openmsg(s): + str = s.value.get_value().upper().rstrip() + mval = "" + mval = [chr(CHARSET.index(x)) for x in str] + for x in range(len(mval), 6): + mval.append(chr(0xff)) + for x in range(0, 6): + _settings.openMsg_Text[x] = ord(mval[x]) + rs.set_apply_callback(apply_openmsg) + disp.append(rs) + + # 32 PAGER - a per-channel attribute + + # 33 PAG.ABK + opts = ["Off", "On"] + ctcss.append(RadioSetting("pag_abk", "Paging Answer Back", + RadioSettingValueList(opts, + opts[_settings + .pag_abk]))) + + # 34 PAG.CDR + opts = ["%2.2d" % (x) for x in range(1, 50)] + ctcss.append(RadioSetting("pag_cdr_1", "Receive Page Code 1", + RadioSettingValueList(opts, + opts[_settings + .pag_cdr_1]))) + + ctcss.append(RadioSetting("pag_cdr_2", "Receive Page Code 2", + RadioSettingValueList(opts, + opts[_settings + .pag_cdr_2]))) + + # 35 PAG.CDT + opts = ["%2.2d" % (x) for x in range(1, 50)] + ctcss.append(RadioSetting("pag_cdt_1", "Transmit Page Code 1", + RadioSettingValueList(opts, + opts[_settings + .pag_cdt_1]))) + + ctcss.append(RadioSetting("pag_cdt_2", "Transmit Page Code 2", + RadioSettingValueList(opts, + opts[_settings + .pag_cdt_2]))) + + # Common Button Options + button_opts = ["Squelch Off", "Weather", "Smart Search", + "Tone Scan", "Scan", "T Call", "ARTS"] + + # 36 PRG P1 + opts = button_opts + ["DC Volts"] + switch.append(RadioSetting( + "prog_p1", "P1 Button", + RadioSettingValueList(opts, opts[_settings.prog_p1]))) + + # 37 PRG P2 + opts = button_opts + ["Dimmer"] + switch.append(RadioSetting( + "prog_p2", "P2 Button", + RadioSettingValueList(opts, opts[_settings.prog_p2]))) + + # 38 PRG P3 + opts = button_opts + ["Mic Gain"] + switch.append(RadioSetting( + "prog_p3", "P3 Button", + RadioSettingValueList(opts, opts[_settings.prog_p3]))) + + # 39 PRG P4 + opts = button_opts + ["Skip"] + switch.append(RadioSetting( + "prog_p4", "P4 Button", + RadioSettingValueList(opts, opts[_settings.prog_p4]))) + + # 40 PSWD + password = "" + for i in _passwd: + if i != 0xFF: + try: + password += CHARSET[i] + except IndexError: + LOG.debug("unknown char index in password: %x " % (i)) + + val = RadioSettingValueString(0, 4, password, True) + val.set_charset(CHARSET[0:15] + "abcdef ") + rs = RadioSetting("passwd", "Password", val) + + def apply_password(s): + str = s.value.get_value().upper().rstrip() + mval = "" + mval = [chr(CHARSET.index(x)) for x in str] + for x in range(len(mval), 4): + mval.append(chr(0xff)) + for x in range(0, 4): + _passwd[x] = ord(mval[x]) + rs.set_apply_callback(apply_password) + misc.append(rs) + + # 41 RESUME + opts = ["3 Sec", "5 Sec", "10 Sec", "Busy", "Hold"] + scan.append(RadioSetting("resume", "Scan Resume Mode", + RadioSettingValueList(opts, opts[_settings.resume]))) + + # 42 RF.SQL + opts = ["Off"] + ["S-%d" % (x) for x in range(1, 10)] + misc.append(RadioSetting("rf_sql", "RF Squelch Threshold", + RadioSettingValueList(opts, opts[_settings.rf_sql]))) + + # 43 RPT - per channel attribute, nothing to do here + + # 44 RVRT + opts = ["Off", "On"] + misc.append(RadioSetting("revert", "Priority Revert", + RadioSettingValueList(opts, opts[_settings.revert]))) + + # 45 S.SRCH + opts = ["Single", "Continuous"] + misc.append(RadioSetting("s_search", "Smart Search Sweep Mode", + RadioSettingValueList(opts, opts[_settings.s_search]))) + + # 46 SHIFT - per channel setting, nothing to do here + + # 47 SKIP = per channel setting, nothing to do here + + # 48 SPLIT - per channel attribute, nothing to do here + + # 49 SQL.TYP - per channel attribute, nothing to do here + + # 50 STEP - per channel attribute, nothing to do here + + # 51 TEMP - read-only status, nothing to do here + + # 52 TN FRQ - per channel attribute, nothing to do here + + # 53 TOT + opts = ["Off", "1 Min", "3 Min", "5 Min", "10 Min"] + misc.append(RadioSetting("tot", "Timeout Timer", + RadioSettingValueList(opts, + opts[_settings.tot]))) + + # 54 TS MUT + opts = ["Off", "On"] + ctcss.append(RadioSetting("ts_mut", "Tone Search Mute", + RadioSettingValueList(opts, + opts[_settings + .ts_mut]))) + + # 55 TS SPEED + opts = ["Fast", "Slow"] + ctcss.append(RadioSetting("ts_speed", "Tone Search Scanner Speed", + RadioSettingValueList(opts, + opts[_settings + .ts_speed]))) + + # 56 VFO.SCN + opts = ["+/- 1MHz", "+/- 2MHz", "+/-5MHz", "All"] + scan.append(RadioSetting("vfo_scan", "VFO Scanner Width", + RadioSettingValueList(opts, + opts[_settings + .vfo_scan]))) + + # 57 WX.ALT + opts = ["Off", "On"] + misc.append(RadioSetting("wx_alert", "Weather Alert Scan", + RadioSettingValueList(opts, opts[_settings.wx_alert]))) + + # 58 WX.VOL + opts = ["Normal", "Maximum"] + misc.append(RadioSetting("wx_vol_max", "Weather Alert Volume", + RadioSettingValueList(opts, opts[_settings.wx_vol_max]))) + + # 59 W/N DV - this is a per-channel attribute, nothing to do here + + return setmode + + def set_settings(self, uisettings): + _settings = self._memobj.settings + for element in uisettings: + if not isinstance(element, RadioSetting): + self.set_settings(element) + continue + if not element.changed(): + continue + + try: + name = element.get_name() + value = element.value + + if element.has_apply_callback(): + LOG.debug("Using apply callback") + element.run_apply_callback() + else: + obj = getattr(_settings, name) + setattr(_settings, name, value) + + LOG.debug("Setting %s: %s" % (name, value)) + except Exception, e: + LOG.debug(element.get_name()) + raise + def get_bank_model(self): return FT2900BankModel(self)

3 4

[chirp_devel] About the Btech patches
by M.Sc. Pavel Milanes Costa 01 Apr '16

01 Apr '16

Hi Dan, This are all the btech patches with improvements and some corrections. This are 11 patches from n1 to nB to apply in this particular order. 73 CO7WT.

2 3

[chirp_devel] [PATCH][BTECH] n2: New serial flush function, fixes #3015
by M.Sc. Pavel Milanes Costa 01 Apr '16

01 Apr '16

New serial flush function, it has the capability of survive a infinite serial data stream and warn the user about

2 3

[chirp_devel] [PATCH][BTECH] nB: Extra step on the upload updated, fixes #3015
by M.Sc. Pavel Milanes Costa 01 Apr '16

01 Apr '16

As we begin to find clones and they use the extra id and the extra step on the upload I updated the code to just check the common place on this step: last byte being an ACK. Comments on the definition updates for the radio clones found.

1 0

[chirp_devel] [PATCH][BTECH] nA: Support for the QYT KT8900, fixes #3015
by M.Sc. Pavel Milanes Costa 01 Apr '16

01 Apr '16

Added support for the radio QYT KT8900. Updated the extra ID code portion, as this radio uses it. Corrected a comment with the correct name for the radio KT-UV980 Related also to the issue #2673

1 0

[chirp_devel] [PATCH][BTECH] n9: Var name correction and debug/error fix, fixes #3015
by M.Sc. Pavel Milanes Costa 01 Apr '16

01 Apr '16

Corrected the var name for the QYT KT-UV980. Applied some rationalization with the debug and error messages.

1 0

[chirp_devel] [PATCH][BTECH] n8: Fixed a bug on the upload (BTECH UV2501+220), fixes #3015
by M.Sc. Pavel Milanes Costa 01 Apr '16

01 Apr '16

The BTECH UV2501+220 has a trick on the upload, it must push an ACK and get two bytes, ending with an ACK; this just before the data upload. Also the first block of data to upload must no start with an ACK.

1 0