March 2016 - Developers - lists.chirpmyradio.com

[chirp_devel] [PATCH][BTECH] New serial flush and better debug messages, fixes #3015
by M.Sc. Pavel Milanes Costa 29 Mar '16

29 Mar '16

Introducing a new suggested serial flush procedure with a hard timeout about 5 times bigger than the default rx block to protect the driver against a infinite serial data stream. Better handling of the debugging messages in the IO procedures.

2 2

[chirp_devel] BTECH IO comments about the patches.
by M.Sc. Pavel Milanes Costa 29 Mar '16

29 Mar '16

Hi Dan and Jim, This are all the patches related to the driver IO so far. Dan this are safe to apply but not to release until Jim confirmed with all the radios he has that it works as expected, as this radios are tricky on the serial line. Jim as you may noticed I have changed thing a lot with the Dan advice, please test the driver and let's use this emails in the devel list to coordinate the job and needed changes (I hope to be none or minimal). Now there is a SERIAL_TIMEOUT var to tweak for speed and safeness of work for all radios. So far the most slow was the QYT KT-UV890 so try to reach Robin to test it once you have tuned this param for the BTECHS & WACCOM Mini. (you must have Robin's email in one of mines, if not ask me privately) I set it to 0.6 seconds to start, my math from the former values and the excel spreadsheet shows that this value is big enough with some room to improvement (lower it, my math says that about 0.45 is the sweet spot). I will try to connect from the park again at noon and evening to check the progress. 73 from the park with the WiFi ;-)

3 10

[chirp_devel] [PATCH][BTECH] Improved _recv() procedure to be less intensive, fixes #3015
by M.Sc. Pavel Milanes Costa 29 Mar '16

29 Mar '16

The _recv() procedure has been rewote to read big chunks of data to lower the system load as requested.

2 2

[chirp_devel] [PATCH][BTECH] Improved and renamed the start of clone mode, fixes #3015
by M.Sc. Pavel Milanes Costa 29 Mar '16

29 Mar '16

The _do_magic() procedure has been renamed and simplified, because the reference for the troublesome alpha radio was removed (and hence support for it), and we no longer need more than one magic per radio. Also as this is a btech driver the common magic for the btechs is set as the default value for the main class.

2 2

[chirp_devel] [PATCH] [New Model] Support for the BTECH Mobile Radios, update 1 for #3015
by Jim Unroe 27 Mar '16

27 Mar '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1459036642 14400 # Node ID be962502a6c19e3a09de92ff7bdcded96e2c90a2 # Parent 1dea27fb59f7adefe00398d8e5648120cddc8e12 [New Model] Support for the BTECH Mobile Radios, update 1 for #3015 This patch includes the following changes: Changes related to developer mailing list discussions - Less intensive strategy to get big chunks of data instead the former more fine grained but resource intensive one - Removed our software serial timeout in favor of the system serial timeout - Removed the reference of the second magic for the alpha radio - Renamed the _do_magic() def - Restructured the "super nested" code to a less nested one - Removed the "not needed" time.sleep() before the read of just one ACK, in favor of a serial system timeout - Removed/changed some of the LOG.xxx() - Removed the exception that goes to the UI about maxtime - Renamed the base class as BTech (from btech) Bug fixes - Fixed the bug found by minuteman1120 about the duplex not working in some cases - New "split" algorithm for the duplex bug above - Fixed a bug with the scode about 0x*F reseted to 0x*0 New - Added support for the QYT KT-UV980 Radio also related to #2673 diff -r 1dea27fb59f7 -r be962502a6c1 chirp/drivers/btech.py --- a/chirp/drivers/btech.py Tue Mar 22 18:50:50 2016 -0700 +++ b/chirp/drivers/btech.py Sat Mar 26 19:57:22 2016 -0400 @@ -18,6 +18,7 @@ import time import struct import logging +import sys LOG = logging.getLogger(__name__) @@ -160,6 +161,9 @@ MINI8900_fp = "M28854" +# QYT KT UV-890 +KTUV890_fp = "H28854" + #### MAGICS # for the Waccom Mini-8900 MSTRING_MINI8900 = "\x55\xA5\xB5\x45\x55\x45\x4d\x02" @@ -169,37 +173,41 @@ MSTRING = "\x55\x20\x15\x09\x20\x45\x4d\x02" +def _clean_buffer(radio): + """Cleaning the read serial buffer""" + radio.pipe.setTimeout(0.1) + + try: + dump = radio.pipe.read(100) + + except Exception: + raise errors.RadioError("Unknown error cleaning the serial buffer") + + def _rawrecv(radio, amount): - """Raw read from the radio device, new approach, this time a byte at - a time as the original driver, the receive data has to be atomic""" + """Raw read from the radio device, less intensive way""" + data = "" try: - tdiff = 0 - start = time.time() - maxtime = amount * 0.020 - - while len(data) < amount and tdiff < maxtime: - d = radio.pipe.read(1) - if len(d) == 1: - data += d - - # Delta time - tdiff = time.time() - start - - # DEBUG - if debug is True: - LOG.debug("time diff %.04f maxtime %.04f, data: %d" % - (tdiff, maxtime, len(data))) + # Getting the data with a dynamic timeout in the serial deppending on + # the amount of data we need + timeout = amount * 0.06 + radio.pipe.setTimeout(timeout) + data = radio.pipe.read(amount) # DEBUG if debug is True: LOG.debug("<== (%d) bytes:\n\n%s" % (len(data), util.hexprint(data))) + # fail if no data is received + if len(data) == 0: + raise errors.RadioError("No data received from radio") + if len(data) < amount: - LOG.error("Short reading %d bytes from the %d requested." % - (len(data), amount)) + LOG.warn("Short reading %d bytes from the %d requested." % + (len(data), amount)) except: raise errors.RadioError("Error reading data from radio") @@ -212,7 +220,6 @@ try: for byte in data: radio.pipe.write(byte) - time.sleep(0.003) # DEBUG if debug is True: @@ -242,123 +249,102 @@ def _recv(radio, addr): - """Get data from the radio """ + """Get data from the radio all at once to lower syscalls load""" + # Get the full 69 bytes at a time to reduce load + # # 1 byte ACK + # 4 bytes header + - # data of length of data (as I see always 0x40 = 64 bytes) + # 64 bytes of data (BLOCK_SIZE) - # catching ack - ack = _rawrecv(radio, 1) + # get the whole block + block = _rawrecv(radio, BLOCK_SIZE + 5) - # checking for a response - if len(ack) != 1: - msg = "No response in the read of the block #0x%04x" % addr - LOG.error(msg) - raise errors.RadioError(msg) + # basic check + if len(block) < (BLOCK_SIZE + 5): + raise errors.RadioError("Short read of the block 0x%04x" % addr) - # valid data + # checking for the ack + ack = block[0] if ack != ACK_CMD: - msg = "Bad ack received from radio in block 0x%04x" % addr - LOG.error(msg) - LOG.debug("Bad ACK was 0x%02x" % ord(ack)) - raise errors.RadioError(msg) + raise errors.RadioError("Bad ack from radio in block 0x%04x" % addr) - # Get the header + basic sanitize - hdr = _rawrecv(radio, 4) - if len(hdr) != 4: - msg = "Short header for block: 0x%04x" % addr - LOG.error(msg) - raise errors.RadioError(msg) - - # receive and validate the header + # header validation + hdr = block[1:5] c, a, l = struct.unpack(">BHB", hdr) if a != addr or l != BLOCK_SIZE or c != ord("X"): - msg = "Invalid answer for block 0x%04x:" % addr - LOG.error(msg) + LOG.debug("Invalid header for block 0x%04x" % addr) LOG.debug("CMD: %s ADDR: %04x SIZE: %02x" % (c, a, l)) - raise errors.RadioError(msg) + raise errors.RadioError("Invalid header for block 0x%04x:" % addr) # Get the data - data = _rawrecv(radio, l) - - # basic validation - if len(data) != l: - msg = "Short block of data in block #0x%04x" % addr - LOG.error(msg) - raise errors.RadioError(msg) - + data = block[5:] return data -def _do_magic(radio, status): - """Try to put the radio in program mode and get the ident string - it will make multiple tries""" +def _start_clone_mode(radio, status): + """Put the radio in clone mode and get the ident string + using multiple tries""" # how many tries - tries = 5 + tries = 3 # prep the data to show in the UI status.cur = 0 status.msg = "Identifying the radio..." - status.max = len(radio._magic) * tries + status.max = tries * len(radio._magic) radio.status_fn(status) mc = 0 + radio.pipe.setTimeout(0.6) + + def send_magic_word(m, magic): + """Send the magic word to the radio, catching the answer""" + + # cleaning the buffer and set timeout + _clean_buffer(radio) + + for a in range(tries): + # Update the UI + status.cur = m * a + a + radio.status_fn(status) + + # send the magic word + _send(radio, magic) + + # Now you get a x06 of ACK if all goes well + ack = radio.pipe.read(1) + + if ack == "\x06": + # DEBUG + LOG.info("Magic ACK received") + status.msg = "Positive Ident!" + status.cur = status.max + radio.status_fn(status) + + return True + + # if the magic word don't open the gate we must inform it + status.cur = status.max + radio.status_fn(status) + return False try: - # do the magic + # try to put the radio in clone mode for magic in radio._magic: - # we try a few times - for a in range(0, tries): - # Update the UI - status.cur = (mc * tries) + a - radio.status_fn(status) - - # cleaning the serial buffer, try wrapped - try: - radio.pipe.flushInput() - except: - msg = "Error with a serial rx buffer flush at _do_magic" - LOG.error(msg) - raise errors.RadioError(msg) - - # send the magic a byte at a time - for byte in magic: - ack = _rawrecv(radio, 1) - _send(radio, byte) - - # A explicit time delay, with a longer one for the UV-5001 - if "5001" in radio.MODEL: - time.sleep(0.5) - else: - time.sleep(0.1) - - # Now you get a x06 of ACK if all goes well - ack = _rawrecv(radio, 1) - - if ack == "\x06": - # DEBUG - LOG.info("Magic ACK received") - status.msg = "Positive Ident!" - status.cur = status.max - radio.status_fn(status) - - return True + # send the magic word and check for a valid answer + r = send_magic_word(mc, magic) + if r is True: + return True # increment the count of magics to send, this is for the UI status mc += 1 - # wait between tries for different MAGICs to allow the radio to - # timeout, this is an experimental fature for the 5001 alpha that - # has the same ident as the MINI8900, raise it if it don't work - time.sleep(5) + # if you get here if that it don't worked + return False except errors.RadioError: raise except Exception, e: - msg = "Unknown error sending Magic to radio:\n%s" % e - raise errors.RadioError(msg) - - return False + raise errors.RadioError("Error sending Magic to radio:\n%s" % e) def _do_ident(radio, status): @@ -366,28 +352,21 @@ # set the serial discipline radio.pipe.setBaudrate(9600) radio.pipe.setParity("N") - radio.pipe.setTimeout(0.005) - # cleaning the serial buffer, try wrapped - try: - radio.pipe.flushInput() - except: - msg = "Error with a serial rx buffer flush at _do_ident" - LOG.error(msg) - raise errors.RadioError(msg) + + # cleaning the buffers + _clean_buffer(radio) # do the magic trick - if _do_magic(radio, status) is False: + if _start_clone_mode(radio, status) is False: msg = "Radio did not respond to magic string, check your cable." - LOG.error(msg) raise errors.RadioError(msg) # Ok, get the ident string ident = _rawrecv(radio, 49) # basic check for the ident - if len(ident) != 49: - msg = "Radio send a sort ident block, you need to increase maxtime." - LOG.error(msg) + if len(ident) < 49: + msg = "Radio sent a sort ident block, aborting" raise errors.RadioError(msg) # check if ident is OK @@ -402,7 +381,9 @@ msg = "Incorrect model ID, got this:\n\n" msg += util.hexprint(ident) LOG.debug(msg) - raise errors.RadioError("Radio identification failed.") + error = "Radio identification failed, this is not the correct model, " + error += "or it's a not supported variant yet." + raise errors.RadioError() # DEBUG LOG.info("Positive ident, this is a %s" % radio.MODEL) @@ -424,11 +405,9 @@ # we just care about the first 16, our magic string is in there if len(id2) < 16: msg = "The extra UV-2501+220 ID is short, aborting." - # DEBUG - LOG.error(msg) raise errors.RadioError(msg) - # ok, check for it, any of the correct ID must be in the received data + # ok, check for it, any of the correct IDs must be in the received data itis = False for eid in radio._id2: if eid in id2: @@ -442,7 +421,6 @@ if itis is False: msg = "The extra UV-2501+220 ID is wrong, aborting." # DEBUG - LOG.error(msg) LOG.debug("Full extra ID on the 2501+220 is: \n%s" % util.hexprint(id2)) raise errors.RadioError(msg) @@ -476,16 +454,11 @@ status.cur = 0 radio.status_fn(status) + # clean serial buffers + _clean_buffer(radio) + data = "" for addr in range(0, MEM_SIZE, BLOCK_SIZE): - # flush input, as per the original driver behavior, try wrapped - try: - radio.pipe.flushInput() - except: - msg = "Error with a serial rx buffer flush at _download" - LOG.error(msg) - raise errors.RadioError(msg) - # sending the read request _send(radio, _make_frame("S", addr, BLOCK_SIZE), 0.1) @@ -525,19 +498,22 @@ status.msg = "Cloning to radio..." radio.status_fn(status) + # clean buffers + _clean_buffer(radio) + + # set a delay based on the OS + if sys.platform in ["win32", "cygwin"]: + # we are in windows + delay = 0.015 + else: + # we are in linux/mac + delay = 0.033 + # the fun start here for addr in range(0, MEM_SIZE, TX_BLOCK_SIZE): - # flush input, as per the original driver behavior, try wrapped - try: - radio.pipe.flushInput() - except: - msg = "Error with a serial rx buffer flush at _upload" - LOG.error(msg) - raise errors.RadioError(msg) - # sending the data d = data[addr:addr + TX_BLOCK_SIZE] - _send(radio, _make_frame("X", addr, TX_BLOCK_SIZE, d), 0.015) + _send(radio, _make_frame("X", addr, TX_BLOCK_SIZE, d), delay) # receiving the response ack = _rawrecv(radio, 1) @@ -580,7 +556,22 @@ return (ilow, ihigh) -class btech(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio): +def _split(rf, f1, f2): + """Returns False if the two freqs are in the same band (no split) + or True otherwise""" + + # determine if the two freqs are in the same band + for low, high in rf.valid_bands: + if f1 >= low and f1 <= high and \ + f2 >= low and f2 <= high: + # if the two freqs are on the same Band this is not a split + return False + + # if you get here is because the freq pairs are split + return False + + +class BTech(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio): """BTECH's UV-5001 and alike radios""" VENDOR = "BTECH" MODEL = "" @@ -697,7 +688,7 @@ ranges""" # setting the correct ranges for each radio type - if self.MODEL == "UV-2501+220": + if "+220" in self.MODEL: # the model 2501+220 has a segment in 220 # and a different position in the memmap ranges = self._memobj.ranges220 @@ -713,7 +704,7 @@ LOG.info("Radio ranges: UHF %d to %d" % uhf) # 220Mhz case - if self.MODEL == "UV-2501+220": + if "+220" in self.MODEL: vhf2 = _decode_ranges(ranges.vhf2_low, ranges.vhf2_high) LOG.info("Radio ranges: VHF(220) %d to %d" % vhf2) self._220_range = vhf2 @@ -805,7 +796,7 @@ # TX freq set offset = (int(_mem.txfreq) * 10) - mem.freq if offset != 0: - if offset > 70000000: # 70 Mhz + if _split(self.get_features(), mem.freq, int(_mem.txfreq) * 10): mem.duplex = "split" mem.offset = int(_mem.txfreq) * 10 elif offset < 0: @@ -855,10 +846,12 @@ PTTID_LIST[_mem.pttid])) mem.extra.append(pttid) + # validating scode + scode = _mem.scode if _mem.scode != 15 else 0 pttidcode = RadioSetting("scode", "PTT ID signal code", RadioSettingValueList( PTTIDCODE_LIST, - PTTIDCODE_LIST[_mem.scode])) + PTTIDCODE_LIST[scode])) mem.extra.append(pttidcode) optsig = RadioSetting("optsig", "Optional signaling", @@ -963,16 +956,18 @@ return False -# Note: -# the order in the lists in the _magic, IDENT and _fileid is important -# we put the most common units first, the policy is as follows: - -# - First latest (newer) units, as they will be the most common -# - Second the former latest version, and recursively... -# - At the end the pre-production units (pp) as this will be unique +# =========================================================================== +# The order in the _magic list, is important if it's not bigger than two. +# If we found a situation where the count of magics for a single model is +# more than two we need to make a new radio model definition as "Gen 2 v2" +# or something like that. +# +# This has a time impact on the _start_clone_mode() with 5 secs of pause for +# each magic to sent, so if this list get bigger than two the user has to wait +# for at least 15 seconds to the start of the real clone mode. @directory.register -class UV2501(btech): +class UV2501(BTech): """Baofeng Tech UV2501""" MODEL = "UV-2501" _magic = [MSTRING, ] @@ -980,7 +975,7 @@ @directory.register -class UV2501_220(btech): +class UV2501_220(BTech): """Baofeng Tech UV2501+220""" MODEL = "UV-2501+220" _magic = [MSTRING_220, ] @@ -989,17 +984,28 @@ @directory.register -class UV5001(btech): +class UV5001(BTech): """Baofeng Tech UV5001""" MODEL = "UV-5001" - _magic = [MSTRING, MSTRING_MINI8900] + _magic = [MSTRING, ] _fileid = [UV5001G22_fp, UV5001G2_fp, UV5001alpha_fp, UV5001pp_fp] @directory.register -class MINI8900(btech): +class MINI8900(BTech): """WACCOM MINI-8900""" VENDOR = "WACCOM" MODEL = "MINI-8900" _magic = [MSTRING_MINI8900, ] _fileid = [MINI8900_fp, ] + + +(a)directory.register +class KTUV980(BTech): + """QYT KT-UV980""" + VENDOR = "QYT" + MODEL = "KT-UV980" + _vhf_range = (136000000, 175000000) + _uhf_range = (400000000, 481000000) + _magic = [MSTRING_MINI8900, ] + _fileid = [KTUV890_fp, ]

3 17

[chirp_devel] [PATCH] [New Model] Add support for QYT KT-UV980
by Jim Unroe 27 Mar '16

27 Mar '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1459130501 14400 # Node ID 0bdf9a3e732ee90cbbe88f860009098f09e2deb1 # Parent f72dc17eee0a32e1d6b6b5ad523c17eda2b6b094 [New Model] Add support for QYT KT-UV980 New - Added support for the QYT KT-UV980 Radio to btech driver related to #2673 diff -r f72dc17eee0a -r 0bdf9a3e732e chirp/drivers/btech.py --- a/chirp/drivers/btech.py Sun Mar 27 21:54:31 2016 -0400 +++ b/chirp/drivers/btech.py Sun Mar 27 22:01:41 2016 -0400 @@ -160,6 +160,9 @@ MINI8900_fp = "M28854" +# QYT KT UV-890 +KTUV890_fp = "H28854" + #### MAGICS # for the Waccom Mini-8900 MSTRING_MINI8900 = "\x55\xA5\xB5\x45\x55\x45\x4d\x02" @@ -1020,3 +1023,14 @@ MODEL = "MINI-8900" _magic = [MSTRING_MINI8900, ] _fileid = [MINI8900_fp, ] + + +(a)directory.register +class KTUV980(BTech): + """QYT KT-UV980""" + VENDOR = "QYT" + MODEL = "KT-UV980" + _vhf_range = (136000000, 175000000) + _uhf_range = (400000000, 481000000) + _magic = [MSTRING_MINI8900, ] + _fileid = [KTUV890_fp, ]

1 0

[chirp_devel] [PATCH] [BTECH] change set_options to be less model specific for 220 band radio #3015
by Jim Unroe 27 Mar '16

27 Mar '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1459130071 14400 # Node ID f72dc17eee0a32e1d6b6b5ad523c17eda2b6b094 # Parent 7d6ddfaba49a4e490cb25c831a87197bf55d9966 [BTECH] change set_options to be less model specific for 220 band radio #3015 This patch includes the following changes: Bug fixes - update branching method for models with 220 band diff -r 7d6ddfaba49a -r f72dc17eee0a chirp/drivers/btech.py --- a/chirp/drivers/btech.py Sun Mar 27 21:27:43 2016 -0400 +++ b/chirp/drivers/btech.py Sun Mar 27 21:54:31 2016 -0400 @@ -712,7 +712,7 @@ ranges""" # setting the correct ranges for each radio type - if self.MODEL == "UV-2501+220": + if "+220" in self.MODEL: # the model 2501+220 has a segment in 220 # and a different position in the memmap ranges = self._memobj.ranges220 @@ -728,7 +728,7 @@ LOG.info("Radio ranges: UHF %d to %d" % uhf) # 220Mhz case - if self.MODEL == "UV-2501+220": + if "+220" in self.MODEL: vhf2 = _decode_ranges(ranges.vhf2_low, ranges.vhf2_high) LOG.info("Radio ranges: VHF(220) %d to %d" % vhf2) self._220_range = vhf2

1 0

[chirp_devel] [PATCH] [BTECH] rename base class for BTECH #3015
by Jim Unroe 27 Mar '16

27 Mar '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1459128463 14400 # Node ID 7d6ddfaba49a4e490cb25c831a87197bf55d9966 # Parent 1171fff35e0c4f98716b22de83fd763edca89349 [BTECH] rename base class for BTECH #3015 This patch includes the following changes: Bug fixes Renamed the base class as BTech (from btech) diff -r 1171fff35e0c -r 7d6ddfaba49a chirp/drivers/btech.py --- a/chirp/drivers/btech.py Sun Mar 27 21:16:54 2016 -0400 +++ b/chirp/drivers/btech.py Sun Mar 27 21:27:43 2016 -0400 @@ -595,7 +595,7 @@ return False -class btech(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio): +class BTech(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio): """BTECH's UV-5001 and alike radios""" VENDOR = "BTECH" MODEL = "" @@ -989,7 +989,7 @@ # - At the end the pre-production units (pp) as this will be unique @directory.register -class UV2501(btech): +class UV2501(BTech): """Baofeng Tech UV2501""" MODEL = "UV-2501" _magic = [MSTRING, ] @@ -997,7 +997,7 @@ @directory.register -class UV2501_220(btech): +class UV2501_220(BTech): """Baofeng Tech UV2501+220""" MODEL = "UV-2501+220" _magic = [MSTRING_220, ] @@ -1006,7 +1006,7 @@ @directory.register -class UV5001(btech): +class UV5001(BTech): """Baofeng Tech UV5001""" MODEL = "UV-5001" _magic = [MSTRING, MSTRING_MINI8900] @@ -1014,7 +1014,7 @@ @directory.register -class MINI8900(btech): +class MINI8900(BTech): """WACCOM MINI-8900""" VENDOR = "WACCOM" MODEL = "MINI-8900"

1 0

[chirp_devel] Build test results: Successful
by Build System 27 Mar '16

27 Mar '16

Tested changes: [Jim Unroe <rock.unroe(a)gmail.com>] [BTECH] sigcode bug fix for out-of-range value #3015 This patch includes the following changes: Bug fixes - Address when OEM software put an out-of-range vale for sigcode (0x*F is reset to 0x*0) [Jim Unroe <rock.unroe(a)gmail.com>] [New Model] Support for the BTECH Mobile Radios, update 1 for #3015 This patch includes the following changes: Bug fixes - Fixed the bug found by minuteman1120 about the duplex not working in some cases - New "split" algorithm for the duplex bug above Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev 1dea27fb59f7adefe00398d8e5648120cddc8e12 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 1dea27fb59f7adefe00398d8e5648120cddc8e12 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson6311256316578758460.sh [workspace] $ /bin/sh -xe /tmp/hudson7206186958759586836.sh + PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.051s OK Patch 'tip' is OK Checking for PEP8 regressions... ./chirp/drivers/ft60.py:521:45: W291 trailing whitespace ./chirp/drivers/ft60.py:522:25: E128 continuation line under-indented for visual indent ./chirp/drivers/ft60.py:523:13: E301 expected 1 blank line, found 0 ./chirp/drivers/ft817.py:587:41: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:681:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:685:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:688:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:689:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:692:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:693:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:696:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:699:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:702:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:705:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:708:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:711:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:714:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:717:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:718:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:721:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:722:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:725:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:728:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:729:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:732:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:733:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:736:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:737:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:740:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:741:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:744:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:747:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:750:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:751:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:754:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:755:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:758:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:761:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:764:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:765:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:768:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:769:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:772:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:773:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:776:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:779:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:780:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:783:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:786:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:787:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:790:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:791:29: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:807:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:808:31: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:811:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:814:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:818:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:824:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:829:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:833:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:837:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:841:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:845:25: E128 continuation line under-indented for visual indent ./chirp/drivers/kguv8d.py:890:25: E128 continuation line under-indented for visual indent ./chirp/drivers/thd72.py:188:1: E302 expected 2 blank lines, found 1 ./chirp/drivers/thd72.py:203:23: E201 whitespace after '[' ./chirp/drivers/thd72.py:203:80: E501 line too long (171 > 79 characters) ./chirp/drivers/thd72.py:203:170: E202 whitespace before ']' ./chirp/drivers/thd72.py:204:13: E201 whitespace after '[' ./chirp/drivers/thd72.py:204:61: E202 whitespace before ']' ./chirp/drivers/thd72.py:205:23: E201 whitespace after '[' ./chirp/drivers/thd72.py:205:74: E202 whitespace before ']' ./chirp/drivers/thd72.py:206:18: E201 whitespace after '[' ./chirp/drivers/thd72.py:206:65: E202 whitespace before ']' ./chirp/drivers/thd72.py:591:1: W293 blank line contains whitespace ./chirp/drivers/thd72.py:599:1: W293 blank line contains whitespace ./chirp/ui/mainapp.py:637:13: E128 continuation line under-indented for visual indent ./chirp/ui/mainapp.py:651:5: E303 too many blank lines (2) ./chirp/ui/mainapp.py:1355:80: E501 line too long (81 > 79 characters) ./chirp/ui/mainapp.py:1637:80: E501 line too long (85 > 79 characters) real 0m7.542s user 0m7.426s sys 0m0.044s ================================================ Tests OK + cat /var/lib/jenkins/.chirp/debug.log [2016-03-27 18:27:27,890] chirp.logger - DEBUG: CHIRP 0.3.0dev on Linux - Ubuntu 14.04.3 LTS (Python 2.7.6) [2016-03-27 18:27:27,900] chirp.directory - INFO: Registered Kenwood_TH-D7 = THD7Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TH-D7G = THD7GRadio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TM-D700 = TMD700Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TM-V7 = TMV7Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TM-G707 = TMG707Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TH-G71 = THG71Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TH-F6 = THF6ARadio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TH-F7 = THF7ERadio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TM-D710 = TMD710Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TH-D72_live_mode = THD72Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TM-V71 = TMV71Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TM-D710G = TMD710GRadio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TH-K2 = THK2Radio [2016-03-27 18:27:27,901] chirp.directory - INFO: Registered Kenwood_TM-271 = TM271Radio [2016-03-27 18:27:27,902] chirp.directory - INFO: Registered Kenwood_TM-281 = TM281Radio [2016-03-27 18:27:27,902] chirp.directory - INFO: Registered Kenwood_TM-471 = TM471Radio [2016-03-27 18:27:27,902] chirp.directory - INFO: Registered Icom_7200 = Icom7200Radio [2016-03-27 18:27:27,902] chirp.directory - INFO: Registered Icom_IC-7000 = Icom7000Radio [2016-03-27 18:27:27,902] chirp.directory - INFO: Registered Icom_746 = Icom746Radio [2016-03-27 18:27:27,903] chirp.directory - INFO: Registered Alinco_DR03T = DR03Radio [2016-03-27 18:27:27,903] chirp.directory - INFO: Registered Alinco_DR06T = DR06Radio [2016-03-27 18:27:27,903] chirp.directory - INFO: Registered Alinco_DR135T = DR135Radio [2016-03-27 18:27:27,903] chirp.directory - INFO: Registered Alinco_DR235T = DR235Radio [2016-03-27 18:27:27,903] chirp.directory - INFO: Registered Alinco_DR435T = DR435Radio [2016-03-27 18:27:27,903] chirp.directory - INFO: Registered Alinco_DJ596 = DJ596Radio [2016-03-27 18:27:27,903] chirp.directory - INFO: Registered Jetstream_JT220M = JT220MRadio [2016-03-27 18:27:27,903] chirp.directory - INFO: Registered Alinco_DJ175 = DJ175Radio [2016-03-27 18:27:27,904] chirp.directory - INFO: Registered AnyTone_5888UV = AnyTone5888UVRadio [2016-03-27 18:27:27,904] chirp.directory - INFO: Registered Intek_HR-2040 = IntekHR2040Radio [2016-03-27 18:27:27,904] chirp.directory - INFO: Registered Polmar_DB-50M = PolmarDB50MRadio [2016-03-27 18:27:27,904] chirp.directory - INFO: Registered Powerwerx_DB-750X = PowerwerxDB750XRadio [2016-03-27 18:27:27,904] chirp.directory - INFO: Registered AnyTone_TERMN-8R = AnyToneTERMN8RRadio [2016-03-27 18:27:27,904] chirp.directory - INFO: Registered AnyTone_OBLTR-8R = AnyToneOBLTR8RRadio [2016-03-27 18:27:27,905] chirp.directory - INFO: Registered Sainsonic_AP510 = AP510Radio [2016-03-27 18:27:27,905] chirp.directory - INFO: Registered Baofeng_UV-3R = UV3RRadio [2016-03-27 18:27:27,905] chirp.directory - INFO: Registered Baojie_BJ-9900 = BJ9900Radio [2016-03-27 18:27:27,906] chirp.directory - INFO: Registered Baofeng_UV-5R = BaofengUV5R [2016-03-27 18:27:27,906] chirp.directory - INFO: Registered Baofeng_F-11 = BaofengF11Radio [2016-03-27 18:27:27,906] chirp.directory - INFO: Registered Baofeng_UV-82 = BaofengUV82Radio [2016-03-27 18:27:27,906] chirp.directory - INFO: Registered Baofeng_UV-6 = BaofengUV6Radio [2016-03-27 18:27:27,906] chirp.directory - INFO: Registered Intek_KT-980HP = IntekKT980Radio [2016-03-27 18:27:27,906] chirp.directory - INFO: Registered Baofeng_BF-F8HP = BaofengBFF8HPRadio [2016-03-27 18:27:27,906] chirp.directory - INFO: Registered Baofeng_UV-82HP = BaofengUV82HPRadio [2016-03-27 18:27:27,907] chirp.directory - INFO: Registered Baojie_BJ-UV55 = BaojieBJUV55Radio [2016-03-27 18:27:27,907] chirp.directory - INFO: Registered BTECH_UV-2501 = UV2501 [2016-03-27 18:27:27,907] chirp.directory - INFO: Registered BTECH_UV-2501+220 = UV2501_220 [2016-03-27 18:27:27,907] chirp.directory - INFO: Registered BTECH_UV-5001 = UV5001 [2016-03-27 18:27:27,907] chirp.directory - INFO: Registered WACCOM_MINI-8900 = MINI8900 [2016-03-27 18:27:27,907] chirp.directory - INFO: Registered Feidaxin_FD-268A = FD268ARadio [2016-03-27 18:27:27,907] chirp.directory - INFO: Registered Feidaxin_FD-268B = FD268BRadio [2016-03-27 18:27:27,908] chirp.directory - INFO: Registered Feidaxin_FD-288A = FD288ARadio [2016-03-27 18:27:27,908] chirp.directory - INFO: Registered Feidaxin_FD-288B = FD288BRadio [2016-03-27 18:27:27,908] chirp.directory - INFO: Registered Feidaxin_FD-150A = FD150ARadio [2016-03-27 18:27:27,908] chirp.directory - INFO: Registered Feidaxin_FD-160A = FD160ARadio [2016-03-27 18:27:27,908] chirp.directory - INFO: Registered Feidaxin_FD-450A = FD450ARadio [2016-03-27 18:27:27,908] chirp.directory - INFO: Registered Feidaxin_FD-460A = FD460ARadio [2016-03-27 18:27:27,908] chirp.directory - INFO: Registered Yaesu_FT-1802M = FT1802Radio [2016-03-27 18:27:27,909] chirp.directory - INFO: Registered Yaesu_FT-1D_R = FT1Radio [2016-03-27 18:27:27,909] chirp.directory - INFO: Registered Yaesu_FT-2800M = FT2800Radio [2016-03-27 18:27:27,910] chirp.directory - INFO: Registered Yaesu_FT-2900R_1900R = FT2900Radio [2016-03-27 18:27:27,910] chirp.directory - INFO: Registered Yaesu_FT-2900E_1900E_E = FT2900ERadio [2016-03-27 18:27:27,910] chirp.directory - INFO: Registered Yaesu_FT-2900_1900_Modded_Opened_Xmit = FT2900ModRadio [2016-03-27 18:27:27,910] chirp.directory - INFO: Registered Yaesu_FT-50 = FT50Radio [2016-03-27 18:27:27,911] chirp.directory - INFO: Registered Yaesu_FT-60 = FT60Radio [2016-03-27 18:27:27,911] chirp.directory - INFO: Registered Yaesu_FT-7800_7900 = FT7800Radio [2016-03-27 18:27:27,911] chirp.directory - INFO: Registered Yaesu_FT-8800 = FT8800Radio [2016-03-27 18:27:27,911] chirp.directory - INFO: Registered Yaesu_FT-8900 = FT8900Radio [2016-03-27 18:27:27,911] chirp.directory - INFO: Registered Yaesu_FT-8100 = FT8100Radio [2016-03-27 18:27:27,912] chirp.directory - INFO: Registered Yaesu_FT-817 = FT817Radio [2016-03-27 18:27:27,912] chirp.directory - INFO: Registered Yaesu_FT-817ND = FT817NDRadio [2016-03-27 18:27:27,912] chirp.directory - INFO: Registered Yaesu_FT-817ND_US = FT817NDUSRadio [2016-03-27 18:27:27,912] chirp.directory - INFO: Registered Yaesu_FT-857_897 = FT857Radio [2016-03-27 18:27:27,912] chirp.directory - INFO: Registered Yaesu_FT-857_897_US = FT857USRadio [2016-03-27 18:27:27,913] chirp.directory - INFO: Registered Yaesu_FT-90 = FT90Radio [2016-03-27 18:27:27,913] chirp.directory - INFO: Registered Yaesu_FTM-350 = FTM350Radio [2016-03-27 18:27:27,914] chirp.directory - INFO: Registered Generic_CSV = CSVRadio [2016-03-27 18:27:27,914] chirp.directory - INFO: Registered Commander_KG-UV = CommanderCSVRadio [2016-03-27 18:27:27,914] chirp.directory - INFO: Registered RT_Systems_CSV = RTCSVRadio [2016-03-27 18:27:27,914] chirp.directory - INFO: Registered ARRL_Travel_Plus = TpeRadio [2016-03-27 18:27:27,920] chirp.directory - INFO: Registered Generic_XML = XMLRadio [2016-03-27 18:27:27,923] chirp.directory - INFO: Registered Baofeng_BF-888 = H777Radio [2016-03-27 18:27:27,923] chirp.directory - INFO: Registered Icom_IC-208H = IC208Radio [2016-03-27 18:27:27,923] chirp.directory - INFO: Registered Icom_IC-2100H = IC2100Radio [2016-03-27 18:27:27,924] chirp.directory - INFO: Registered Icom_IC-2200H = IC2200Radio [2016-03-27 18:27:27,924] chirp.directory - INFO: Registered Icom_IC-2720H = IC2720Radio [2016-03-27 18:27:27,924] chirp.directory - INFO: Registered Icom_IC-2820H = IC2820Radio [2016-03-27 18:27:27,924] chirp.directory - INFO: Registered Icom_IC-91_92AD = IC9xRadio [2016-03-27 18:27:27,925] chirp.directory - INFO: Registered Icom_IC-Q7A = ICQ7Radio [2016-03-27 18:27:27,925] chirp.directory - INFO: Registered Icom_IC-T70 = ICT70Radio [2016-03-27 18:27:27,925] chirp.directory - INFO: Registered Icom_IC-T7H = ICT7HRadio [2016-03-27 18:27:27,925] chirp.directory - INFO: Registered Icom_IC-T8A = ICT8ARadio [2016-03-27 18:27:27,925] chirp.directory - INFO: Registered Icom_IC-W32A = ICW32ARadio [2016-03-27 18:27:27,926] chirp.directory - INFO: Registered Icom_IC-W32E = ICW32ERadio [2016-03-27 18:27:27,926] chirp.directory - INFO: Registered Icom_IC-V82_U82 = ICx8xRadio [2016-03-27 18:27:27,926] chirp.directory - INFO: Registered Icom_ID-31A = ID31Radio [2016-03-27 18:27:27,926] chirp.directory - INFO: Registered Icom_ID-51 = ID51Radio [2016-03-27 18:27:27,927] chirp.directory - INFO: Registered Icom_ID-51_Plus = ID51PLUSRadio [2016-03-27 18:27:27,927] chirp.directory - INFO: Registered Icom_ID-800H_v2 = ID800v2Radio [2016-03-27 18:27:27,927] chirp.directory - INFO: Registered Icom_ID-880H = ID880Radio [2016-03-27 18:27:27,927] chirp.directory - INFO: Registered Icom_ID-80H = ID80Radio [2016-03-27 18:27:27,927] chirp.directory - INFO: Registered Kenwood_HMK = HMKRadio [2016-03-27 18:27:27,928] chirp.directory - INFO: Registered Kenwood_ITM = ITMRadio [2016-03-27 18:27:27,928] chirp.directory - INFO: Registered Wouxun_KG-UV8D = KGUV8DRadio [2016-03-27 18:27:27,928] chirp.directory - INFO: Registered KYD_NC-630A = NC630aRadio [2016-03-27 18:27:27,929] chirp.directory - INFO: Registered KYD_IP-620 = IP620Radio [2016-03-27 18:27:27,929] chirp.directory - INFO: Registered Leixen_VV-898 = LeixenVV898Radio [2016-03-27 18:27:27,929] chirp.directory - INFO: Registered Jetstream_JT270M = JetstreamJT270MRadio [2016-03-27 18:27:27,929] chirp.directory - INFO: Registered Wouxun_KG-UVD1P = KGUVD1PRadio [2016-03-27 18:27:27,929] chirp.directory - INFO: Registered Wouxun_KG-UV6 = KGUV6DRadio [2016-03-27 18:27:27,930] chirp.directory - INFO: Registered Wouxun_KG-816 = KG816Radio [2016-03-27 18:27:27,930] chirp.directory - INFO: Registered Wouxun_KG-818 = KG818Radio [2016-03-27 18:27:27,930] chirp.directory - INFO: Registered Puxing_PX-777 = Puxing777Radio [2016-03-27 18:27:27,930] chirp.directory - INFO: Registered Puxing_PX-2R = Puxing2RRadio [2016-03-27 18:27:27,930] chirp.directory - INFO: Registered TYT_TH9000_220 = Th9000220Radio [2016-03-27 18:27:27,930] chirp.directory - INFO: Registered TYT_TH9000_144 = Th9000144Radio [2016-03-27 18:27:27,930] chirp.directory - INFO: Registered TYT_TH9000_440 = Th9000440Radio [2016-03-27 18:27:27,931] chirp.directory - INFO: Registered TYT_TH-9800_File = TYTTH9800File [2016-03-27 18:27:27,931] chirp.directory - INFO: Registered TYT_TH-9800 = TYTTH9800Radio [2016-03-27 18:27:27,931] chirp.directory - INFO: Registered TYT_TH-UV3R = TYTUV3RRadio [2016-03-27 18:27:27,932] chirp.directory - INFO: Registered TYT_TH-UV3R-25 = TYTUV3R25Radio [2016-03-27 18:27:27,932] chirp.directory - INFO: Registered TYT_TH-UVF8D = TYTUVF8DRadio [2016-03-27 18:27:27,932] chirp.directory - INFO: Registered Kenwood_TH-D72_clone_mode = THD72Radio [2016-03-27 18:27:27,932] chirp.directory - INFO: Registered TYT_TH-UVF1 = TYTTHUVF1Radio [2016-03-27 18:27:27,933] chirp.directory - INFO: Registered Kenwood_TK-260 = TK260_Radio [2016-03-27 18:27:27,933] chirp.directory - INFO: Registered Kenwood_TK-270 = TK270_Radio [2016-03-27 18:27:27,933] chirp.directory - INFO: Registered Kenwood_TK-272 = TK272_Radio [2016-03-27 18:27:27,933] chirp.directory - INFO: Registered Kenwood_TK-278 = TK278_Radio [2016-03-27 18:27:27,933] chirp.directory - INFO: Registered Kenwood_TK-360 = TK360_Radio [2016-03-27 18:27:27,933] chirp.directory - INFO: Registered Kenwood_TK-370 = TK370_Radio [2016-03-27 18:27:27,933] chirp.directory - INFO: Registered Kenwood_TK-372 = TK372_Radio [2016-03-27 18:27:27,933] chirp.directory - INFO: Registered Kenwood_TK-378 = TK378_Radio [2016-03-27 18:27:27,936] chirp.directory - INFO: Registered Kenwood_TK-760 = TK760_Radio [2016-03-27 18:27:27,936] chirp.directory - INFO: Registered Kenwood_TK-762 = TK762_Radio [2016-03-27 18:27:27,936] chirp.directory - INFO: Registered Kenwood_TK-768 = TK768_Radio [2016-03-27 18:27:27,936] chirp.directory - INFO: Registered Kenwood_TK-860 = TK860_Radio [2016-03-27 18:27:27,936] chirp.directory - INFO: Registered Kenwood_TK-862 = TK862_Radio [2016-03-27 18:27:27,936] chirp.directory - INFO: Registered Kenwood_TK-868 = TK868_Radio [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-868G = TK868G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-862G = TK862G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-860G = TK860G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-768G = TK768G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-762G = TK762G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-760G = TK760G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-278G = TK278G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-272G = TK272G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-270G = TK270G_Radios [2016-03-27 18:27:27,937] chirp.directory - INFO: Registered Kenwood_TK-260G = TK260G_Radios [2016-03-27 18:27:27,938] chirp.directory - INFO: Registered Kenwood_TK-7102 = KenwoodTK7102Radio [2016-03-27 18:27:27,938] chirp.directory - INFO: Registered Kenwood_TK-8102 = KenwoodTK8102Radio [2016-03-27 18:27:27,938] chirp.directory - INFO: Registered Kenwood_TK-7108 = KenwoodTK7108Radio [2016-03-27 18:27:27,938] chirp.directory - INFO: Registered Kenwood_TK-8108 = KenwoodTK8108Radio [2016-03-27 18:27:27,939] chirp.directory - INFO: Registered Kenwood_TS-2000 = TS2000Radio [2016-03-27 18:27:27,939] chirp.directory - INFO: Registered Baofeng_UV-B5 = BaofengUVB5 [2016-03-27 18:27:27,939] chirp.directory - INFO: Registered Yaesu_VX-170 = VX170Radio [2016-03-27 18:27:27,940] chirp.directory - INFO: Registered Yaesu_VX-2 = VX2Radio [2016-03-27 18:27:27,940] chirp.directory - INFO: Registered Yaesu_VX-3 = VX3Radio [2016-03-27 18:27:27,940] chirp.directory - INFO: Registered Yaesu_VX-5 = VX5Radio [2016-03-27 18:27:27,941] chirp.directory - INFO: Registered Yaesu_VX-6 = VX6Radio [2016-03-27 18:27:27,941] chirp.directory - INFO: Registered Yaesu_VX-7 = VX7Radio [2016-03-27 18:27:27,941] chirp.directory - INFO: Registered Yaesu_VX-8_R = VX8Radio [2016-03-27 18:27:27,942] chirp.directory - INFO: Registered Yaesu_VX-8_DR = VX8DRadio [2016-03-27 18:27:27,942] chirp.directory - INFO: Registered Yaesu_VX-8_GE = VX8GERadio [2016-03-27 18:27:27,942] chirp.directory - INFO: Registered Vertex_Standard_VXA-700 = VXA700Radio Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] [PATCH] [BTECH] sigcode bug fix for out-of-range value #3015
by Jim Unroe 27 Mar '16

27 Mar '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1459127814 14400 # Node ID 1171fff35e0c4f98716b22de83fd763edca89349 # Parent c7ad0f850fc95ac27e98ff47b127127bcd60acfe [BTECH] sigcode bug fix for out-of-range value #3015 This patch includes the following changes: Bug fixes - Address when OEM software put an out-of-range vale for sigcode (0x*F is reset to 0x*0) diff -r c7ad0f850fc9 -r 1171fff35e0c chirp/drivers/btech.py --- a/chirp/drivers/btech.py Sun Mar 27 20:50:56 2016 -0400 +++ b/chirp/drivers/btech.py Sun Mar 27 21:16:54 2016 -0400 @@ -870,10 +870,12 @@ PTTID_LIST[_mem.pttid])) mem.extra.append(pttid) + # validating scode + scode = _mem.scode if _mem.scode != 15 else 0 pttidcode = RadioSetting("scode", "PTT ID signal code", RadioSettingValueList( PTTIDCODE_LIST, - PTTIDCODE_LIST[_mem.scode])) + PTTIDCODE_LIST[scode])) mem.extra.append(pttidcode) optsig = RadioSetting("optsig", "Optional signaling",

1 0